Press Brake

TRUMPF V 85

Condition: good (used), Year of construction: 2002, Used 2-meter CNC press brake Type: V85 Capacity: 2050 x 85 tons Lodpfoz Hwi Rex Akmoru Delem CNC control Year of manufacture: 2002 Stroke length: 365 mm Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC controlled Automatic Wila NS clamping system Adjustable table CNC crowning

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Lodpsza E S Djfx Akmeru

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Lrodpfx Aksy Dpufsmeu Model: TrumaBend V85s Capacity: 2050 x 85 tons Control: Delem DA69 Axes: Y1, Y2, X, R, Z1 and Z2 Hydraulic WILA upper and lower clamping Year of manufacture: 2005

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke Lrodpfexaa Ursx Akmju very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, Punching force: 220 kN Sheet thickness: 8 mm Working area: 2535x1280 mm Sheet thickness for stainless steel: 4-6 mm Accessories: Lrjdpfsyrcycox Akmsu - Tool change cassettes - Table with ball rollers - Operating hours: 97,000

Condition: ready for operation (used), Year of construction: 1998, overall weight: 8,600 kg, This 6-axis TRUMPF TrumaBend V85S press brake was manufactured in 1998. It features a bending length of 2,550 mm, an 850 kN bending force, and a 6-axis back gauge. The Delem 65 CNC control enhances precision, while the electro-hydraulic twin cylinder drive ensures robust performance. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85S machine we have for sale. Contact us for more information about this machine. Additional equipment • Extended Installation Height and Stroke: Additional 150 mm each • 2nd Foot Switch Machine Benefits Technical Machine Benefits • Drive type: electro-hydraulic twin cylinder with independent y1/y2 movement • Power requirements: 11 kw / 415 v / 50 hz • Design: down-stroking with dual cylinder electro-hydraulic ram drive via proportional valves Lrjdpfx Akozuxkhomju • Inclination of beam (y1/y2): +10 mm • Bending force: 850 kn // gap between columns: 2260 mm // throat depth: 410 mm // stroke length: 215 mm // open height: 385 mm • Bed width: 120 mm • Ram measurement: incremental with deflection compensation • Tool holders: self-centering top tool holder, hardened bottom tool holder • Hydraulic tool clamping: hydraulic clamping for both top and bottom tools • Safety features: safety screens, light barriers, single/double break modes // front support brackets: two quick-adjustable brackets Extra Information Back Gauge: CNC-controlled ‘X’ and ‘R’ axis back gauge with safe 2-finger adjustment X-axis Back Gauge Travel: 600 mm Maximum X Distance: 860 mm R-axis Vertical Travel: 250 mm Back Gauge Travel Speed: 500 mm/sec R-axis Speed: 300 mm/sec Z1/Z2 Axis: CNC-controlled, asymmetric finger adjustment Working Speeds: Approach Speed: 200 mm/sec Operation Speed: 1–10 mm/sec Return Speed: 135 mm/sec Technical Specification Bending Length 2550 mm

Condition: used, functionality: fully functional, Year of construction: 2001, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Lsdpfjw Imq Rsx Akmjru

Condition: ready for operation (used), Year of construction: 2010, operating hours: 15,043 h, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 4, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Working Range X Tube Axis: 6500 mm • Outer Circle Diameter: 254 mm (Upgraded from standard 200 mm) • Unloading Station: 3 m with brush table, front unloading • Laser Type: CO2 Laser TruFlow 3600 including LensLine (Surcharge upgrade from standard TruFlow 2000) • Control: Sinumerik 840D, Teleservice • Standard Software/Features: NitroLine, FocusLine, SprintLine, Laser power control, Programmable cutting gas pressure, Program re-entry, Automatic shutdown, Workspace lighting, Laser logbook function, Laser cooling unit • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting Head: Lens cutting head with 155 mm focal length, ControlLine • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Compact dust extractor 1500 Nm³/h, Protective cabin with Makrolon panels • Ambient Operating Temperature: Up to 43°C • Installation Type: Special machine installation setup Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 16 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • Loading Unit: LoadMaster Tube 6.5 m with bundle support, 2 grippers, 254 mm outer circle diameter capacity, low-scratch design for 6m, swiveling conveyor line, additional gripper D=254 mm • Options for LoadMaster Tube 6 m: Lrodpfxex D I H Ds Akmsu • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance

Condition: ready for operation (used), Year of construction: 1996, stroke length: 365 mm, overall weight: 9,050 kg, pressing force: 85 t, Equipment: documentation/manual, Hydraulic press brake Manufacturer: TRUMPF, Type: TrumaBend V85 Year of manufacture: 1996 Technical data Manufacturer: Trumpf Type: TrumaBend V85 Lrjdoza Hxrspfx Akmou Year of manufacture: 1996 Press force: 85 t Operating hours: 46927 h (metered) Bending length: 2050 mm Stroke: 365 mm Stand distance: 410 mm Motor power: 10 kW Dimensions: approx. L 2.70 x W 2.40 x H 2.40 m Weight: approx. 9050 kg Equipment: • Controlled axes: Y1, Y2, X, R, Z1, Z2 • CNC-controlled crowning system • 2D graphics control DELEM DA • Hydraulic tool clamping, top and bottom • Pneumatic die shifting All information is provided without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: like new (used), functionality: fully functional, Year of construction: 2001, stroke length: 365 mm, overall weight: 9,050 kg, pressing force: 85 t, clearance between the columns: 540 mm, table length: 2,100 mm, Equipment: CE marking, safety light barrier, The following 2 metre Trumpf press brake featuring the specific extended daylight configuration. The machine is in exceptionally clean, near-mint condition. This is largely because it is being sourced from an immaculate, highly regulated factory that manufactures components exclusively for the medical sector. Used Trumpf V series cnc pressbrake for sale Trumpf v85 2m x 85ton – 4axis cnc pressbrake / with Extended daylight and stroke Make: Trumpf Lrjdpfx Akjzfp D Tomeu Model: v85 Year: 2001 Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Crowing Complete with: • Extended stroke and daylight: 365mm maximum stroke / 535mm daylight • 2axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition Delivery to your works, installation and tuition with your operators available.

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp Ljdpfx Aoxabt Aokmoru - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, stroke length: 215 mm, throat depth: 410 mm, pressing force: 85 t, clearance between the columns: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Frame gap: 1,750 mm Stroke: 215 mm Throat depth: 410 mm Controlled axes: y1, y2, x, R MACHINE DETAILS Control manufacturer: DELEM Total power: 13 kW Dimensions & Weight Dimensions (L x W x H): 3,190 x 2,100 x 2,375 mm Ledpfx Ajy Ix Ipjkmjru Machine weight: 8,750 kg EQUIPMENT Two-hand foot operation 2 support arms Crowning Die shifting CNC control Side safety doors 2 manual backgauge fingers

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, bending force (max.): 85 t, stroke length: 215 mm, throat depth: 410 mm, distance between stands: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Distance between uprights: 1,750 mm Stroke: 215 mm Throat depth: 410 mm MACHINE DETAILS Control: DELEM Dimensions & Weight Machine dimensions: 2,700 x 2,100 x 2,400 mm Weight: 7,900 kg EQUIPMENT Two-hand operation 2 support arms Side safety doors Lasersafe Fissler Lodpfx Akeyhmdqsmoru Wila tool clamping Adjustable die position Crowning system Tool cabinet

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm from a maintenance workshop good / well-maintained condition (!!) - inspected condition - machine video - ?v=RY-amZooeX4 Equipment: - robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * swiveling control panel, front right Lrsdpfx Aexaa A Njkmju * 2D graphic display for visualization and multi-simulation * 2D graphic programming * easy operation - CNC motorized backgauge * travel range 10.0 - 1,600 mm * pneumatic / retractable gauge fingers * adjustment speed max. 250 mm/sec. * rear sheet support table with brushes - motorized lower beam adjustment (S-axis) - electro-hydraulic folding movement of the lower beam - pneumatic upper tool clamping - pneumatic lower tool clamping - 1x mobile dual foot pedal - original operating manual + electrical/hydraulic schematics Special accessories included: - 1x segmented set of goat-foot upper tools, H = 150 mm - 1x segmented set of goat-foot upper tools, H = 200 mm - 1x standard sharp-nosed rail (installed) - 1x segmented set of bending/lower tools (installed) - rear sheet support with brushes