Rotary Welding Table

UWM WP 220

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW Hodoirax Ujpfx Achenr -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: like new (used), Year of construction: 2022, 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Hjdpfx Aod Anz Rjchonr Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Speed: 0.01–1.1 rpm Tilt angle up to 135° Hand and foot remote control with speed display Very robust

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Hnedpfx Ajrfx Utjchsr Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm Hsdpfx Aeu Rni Hjchonr distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: new, Year of construction: 2025, load capacity: 20,000 kg, 20-ton container rotating device, roller stand, complete set 380 V, speed continuously adjustable from 200 to 1000 mm/min. for diameters from 500 mm to 4000 mm roller diameter 300 mm x 140 mm temperature resistance of the support rollers: 100°C Hnedpfx Aoifgu Uschjr synchronous dual drive AC motor, 380 V, 750 W with hand and foot remote control, complete set

Condition: new, Year of construction: 2023, Welding turntable, container rotating device, 6000 kg load capacity Digital display with foot-operated remote control Hodpfx Aok Adl Hechonr Diameter from 180 mm to 3500 mm Drive roller diameter 300 mm Dimensions: Length: 1900 mm x Width 470 mm x Height 390 mm Speed, continuously variable: 200 - 1800 mm/min.

Year of construction: 2018, condition: as good as new (ex-display), Welding rotary table KT 50 Load capacity, horizontal: 50 kg, tilted: 25 kg Power supply: 220 V, 50 Hz Table diameter: 320 mm Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, width: 650 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 1.7 – 15 rpm Hedod A Etyepfx Achenr Includes foot-operated remote control

Condition: new, table diameter 490 mm Hedpfx Ajgvkktschsnr table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, weight max. 10 t workpiece diameter 100 - 3200 mm Hnjdpfef Ep Disx Achor drum diameter 300 x 120 mm feed 100 - 1000 mm/min total power requirement 2 x 0,55 kW

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -without hose package -Max. Welding power: 250 A. -Air cooled -Incl. Ground cable -Gas valve -Dimensions: 370/720/H870 mm -Weight: 52 kg Hnsdpfxjdzwwno Achor