Universal Milling Machine

UZINA HK-UFN

Condition: used, Year of construction: 1973, Weight 3 t x-travel 1000 mm Rsdpewzyt Tofx Amnew 110 milling-head swivable +/- ja

Condition: new, welding current max. 300 A open-circuit voltage 55 - 76 V connected load frequency 400 V weight 75 kg Redpfxou Aw Sho Amnsw Dimensions (LxWxH) 950 x 560 x 880 mm Inert gas welding machine: - with pulse function - 300 amps - 400 volts - hose package 3m. - ground cable - Wire feed rolls for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0mm

Year of construction: 1978, condition: used, machine/vehicle number: 068242, Cup wheel diameter: 175 x 60 x 51 mm or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm Table size: AT-F 205 x 345 mm Redpfx Amjbx Elisnew Space required: 1070 x 650 x 1180 mm Drive motor: 500 V (with 380 V, 1/3 power loss), accordingly 0.6 kW

Condition: used, Pallet with 18H7 T-slots, suitable for DMG DMC 100 H and DMG DMC 100 U as well as DMC 125H/U Duoblock. More than 10 pallets available. Rodpsqx Uh Njfx Amnow

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg Rodpfx Ajl Tuvdemnow

Condition: new, cutting diameter 170 mm dimensions of saw-band 2080 x 20 x 0,9 mm table height 880 mm cutting speed 40 + 80 m/min 170 mm 125 mm Rsdsg Trvropfx Amnjw 150 x 190 mm 95 x 120 mm total power requirement 1,1 kW weight of the machine ca. 0,24 t Dimensions (LxWxH) 870 x 1.550 x 1.740 mm mm This metal band saw comes with a closed worm gear. It also has hydraulic pressure control and a base frame that can be rotated through 45 degrees. Other features include emergency stop, the complete cooling system, the factory base frame, automatic switch-off and the quick-release device.

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm Rsdpfx Amsfx Hv Hsnew no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Universal tool milling machine Brand: OPTIMUM Model: MT 100 Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Geometric acceptance with test report Accessories: - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with Redpfx Aew Rlvqomnsw drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp - Coolant system - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Redpfx Aev Rgzwemnew Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Year of construction: 1955, condition: used, Radial drilling machine, drilling machine, boom drilling machine Redped Enr Iofx Amnjw -Outreach: 2055 mm -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg