Wood chipper

Weima WL4

Condition: excellent (used), Year of construction: 2003, Hacker with a 600 mm rotor width Bdedpfx Amjzhxdzonjd large rotor diameter of 36.8 cm with 30 blades 18.5 kW motor

Condition: reconditioned (used), power: 30 kW (40.79 HP), hopper volume: 800 l, working width: 800 mm, Slow-speed shredder, 800 x 1000 mm hopper, 30 kW motor, hydraulic pusher, reversible knives Bsdjwzg Taepfx Amnedd

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Bdsdpfjy D E U Iex Amned

Condition: ready for operation (used), Year of construction: 2012, Brand: Weima Model: WL4 Year of manufacture: 2012 Motor: 18.5 kW Bjdpfx Aozg Dxhomnsdd Stock no.: 2002962 OPTIONS: Motor-driven screw/angle pipe: 2m

Year of construction: 1995, condition: good (used), Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 Bdodpfx Amohbp Ifensd S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Dimension : 2,12m x 0,73m x 1,55m

Condition: used, Year of construction: 2023, Special price on request!! Demonstration machine! Machine Concept: The WEIMA high-performance shredders, with their flexible application possibilities, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips and achieve enormous volume reduction, especially with bulky materials. Operation: The machine is equipped with a large feed hopper, which can be loaded either by conveyor belt or manually. The hopper can be customized according to individual requirements and ensures continuous and cost-effective material feed without the need for manual assistance. A hydraulically controlled pusher supplies the wood waste to be shredded to the rotor's cutting area, operating automatically and load-dependently. The internal slider guides are made of highly wear-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are mounted with universal joints to prevent lateral forces on the piston seals. The patented, profiled V-rotor made from solid steel has a diameter of 252 mm and operates at a rotor speed of 80–120 rpm. The concave-ground, aggressive, and four-way reversible cutters / cutting crowns are located in milled knife pockets on special cutter holders. This patented system, by enabling for the first time the reduction of the cutting gap between the counter knife and rotor, ensures high throughput capacity, low energy consumption, and optimal discharge of shredded material. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one side of the rotor shaft. Bjdpevfy Rzsfx Amnsdd Technical Specification: Motor power: 18.5 kW Hopper opening: 600 x 800 x 1,050 mm Working width – rotor length: 600 mm Rotor diameter: 256 mm Rotor speed: 60–100 rpm Number of knives: 28 Type and size of knives: concave / 40 x 40 mm cutting crowns Screen hole diameter: 12–15 mm Paint: WEIMA Standard RAL 2002 / 7016 Connection: 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Standard equipment: - V-rotor with one knife row 40 x 40 mm - Vibration-damping machine feet - Pressure bar on pusher - Horizontal pusher - Control cabinet with 5 m cable, incl. PLC control and LOGO! text display - Bolted screen - WEIMA WAP gearbox - Extraction socket Ø160 mm - Straight feed hopper Additional equipment: - Additional rotor knife row (28 knives) - Self-cleaning hopper (LOGSPACER) - 4-way segmented floor - Fast-reverse hydraulics with shock valve Location:

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and low-speed model WL 4/18.5 kW Technical data: Bdedpfxobtnftj Amnsd Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen perforation: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (self-cleaning hopper) Top-of-the-line equipment Location: In stock in Bitburg - immediately available - at a special price.

Condition: excellent (used), Year of construction: 2018, Roller glue spreader OSAM S2R-1300 + disc table OSMA TDM Working width: 1300 mm Maximum working height: 100 mm Manual adjustment of working height Bedexrdv Depfx Amnedd 2 glue rollers (top and bottom) Disc table OSAMA TDM 1300-3000 CE marking Year of manufacture of the set: 2018

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and slow-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Bodpfx Aobunq Homnjdd Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen hole size: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (free-cutting hopper) Location: 54634 Bitburg Available immediately

Condition: used, Year of construction: 1991, total length: 1,660 mm, total height: 1,470 mm, total width: 1,100 mm, Colour: Grey Empty weight: 1.300 kg - Year: 1991 Bdjdpfx Aewu Uy Iomnsd - Documentation available: No - CE certificate present: No - Serial number: 500-1014 - Main motor power [kW]: 18.5 - Rotor width [mm]: 600 - Opening width [mm]: 600 - Opening length [mm]: 800 - Sieve perforation [mm]: 15 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 1660mm x 1100mm x 1470mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Bodpfxstqfhxe Amnjdd Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: new, Year of construction: 2025, Weima single-shaft shredder Type: WL 4 Rotor diameter: 260 mm Rotor width: 600 mm Self-cutting hopper Logspaser (600x1050 mm) Motor power: 18.5 kW Bjdpfxoxwyx Ss Amnsdd Double knife row with 28 pcs. Weight: 1300 kg Extraction nozzle: 160 mm incl. bolted extraction trough. Screen perforation: 15 / 20 mm (or as requested and agreed) Stock machine immediately available. Price ex stock Rosenheim, excluding shipping.

Condition: good (used), functionality: fully functional, Rotor approx. 250 mm Feed opening approx. 600 x 800 mm Rotor length approx. 600 mm Motor 18.5 kW Bdodpsy A Rqljfx Amnjd Technical data on request

Condition: used, Year of construction: 1999, Shredder Nazzareno K700 Serial number: 97013 Year of manufacture: 2007 Bdsdpowh Na Aofx Amnjd Motor power: 18.5 kW Opening: 740x1400 mm Rotor length: 750 mm Screen diameter: 10 mm Includes feeding conveyor Transport dimensions: 3600×1350×1900 mm (L×W×H), Weight: 3500 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 97013 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1993, output 18,5 kw Bdsdpfoyk H Tqox Amnod number of blades 28 Weight 1300 kg