Moulder planer with infeed 100 m/min

Weinig Hydromat H25N

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Ndodpfx Abjlht H Eeyed Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Ndsdpfody Hm Nsx Abysd Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Heavy duty 5 KW motor. Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. 520mm TCT sawblade Z60. Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: like new (used), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy 6-roller infeed - Working width max. 300 mm - Working height max. 140 mm - Electronic feed infinitely variable 12 - 120 m/min. - Feed motor 22.0 KW - 1st spindle bottom 11.0 KW - 2nd spindle right 11.0 KW - 3rd spindle left 15.0 KW - 4th spindle left 11.0 KW - 5. spindle right 11.0 KW - 6. spindle top 22.0 KW - 7. spindle bottom 30.0 KW - 8. spindle top 11.0 KW - 9. spindle bottom 11.0 KW - All spindle motors with electronic brake - COMPLETELY NEW MILLING SPINDLES - Spindle diameter ø 50 mm - Spindle speed 6,000 rpm. - 6 driven rollers in the table - hard chrome plated Ndedpfxjtynpxo Abyjd - Spindle 1 + 6 + 7 + 8 + 9 with NEW counter bearing - Hydraulic counter bearing clamping - Spindle 2 + 3 + 8 + 9 with straight jinter - Spindle 4 + 6 pneumatic pressure - NEW feed rollers D=170 mm - Hard chrome-plated table tops - Hard chrome plated stops - - Heavy pressure rollers from above - pneumatic - Heavy pressure rollers from the side - pneumatic - Automatic table lubrication - NEW - Central position of the lubrication points - NEW control panel free-standing, 5m cable - NEW free-standing control cabinet, 5m cable - Operating instructions, spare parts list and wiring diagram + Many NEW spare parts / accessories. Dimension: - Total length approx. 6,150 mm - Total width approx. 2,160 mm - Machine weight approx. 9,500 KG Connected load: - Total connected load approx. 157 KW Condition: Machine as shown on the photos - technically as good as new Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: At any time by appointment Offers + inquiries only with complete company data Subject to errors and prior sale

Condition: good (used), Four side planer Weinig Unimat 23 Lamelling machine 9 spindles, grooved bed Working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5,5 kW / 6 - 36 m/min, Nsdpfx Abopq T Rbeyodd spindle arrangement: 1- Down ( 5,5 kW ) 2- Right ( 5,5 kW ) 3- Left ( 5,5 kW ) 4- Right ( 5,5 kW ) 5-Top (11 kW) 6-Bottom (5,5 kW) 7-Top (7,5 kW) 8-Bottom (37 kW) 9-Uni (11 kW) 5 driven rollers in the table

Year of construction: 1992, condition: excellent (used), E.Gillet vertical sawmill cutting line. Wood feeder and receiver included. Maximum cutting length 6.5mb Very good condition. Njdpfxei Egn Ue Abysdd

Year of construction: 1996, condition: good (used), Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW Ndsdeh Dwl Dopfx Abyed 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Nodpfjlu D Tfsx Abyjdd Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640/1.2 is a sensational machine for precision bending of all types of metal sheets (steel 1.2mm, titanium zinc 1.2mm, aluminum of 1.5 mm, copper sheet 0.8 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard. - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 350 kg Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Only shipping is possible Delivery every week Nsdsdad Adjpfx Abyodd Price excl. shipping We provide invoices with 0% of tax.

Condition: good (used), Year of construction: 2002, functionality: fully functional, GOMA FC -10 KZ6 finger jointing wood joining line Ndedot Sfz Ijpfx Abyjd Polish production year of production 2002 DTR with declaration of conformity TECHNICAL PARAMETERS: wood width min / max - 40 / 160 mm thickness of wood min / max - 25 / 80 mm length of a single glued section 6000 mm compression force 7500 kG / 100 atm SAW saw blade diameter 300 mm motor power 6 kW milling machine power 15 kW PRESS hydraulic pump power 4 kW working pressure 100 bar

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: Ndsdpfx Ajdfgg Isbyed A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader