4 side moulder

WEINIG Profimat 23, Uniplan 23, RF 15

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis Ffsdpfot R T Hcex Adasw 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: excellent (used), Year of construction: 2011, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 20MS090000/007, total length: 3,000 mm, type of input current: AC, total width: 2,500 mm, total height: 1,900 mm, overall weight: 1,450 kg, empty load weight: 1,450 kg, working width: 900 mm, compressed air connection: 6 bar, throughput speed: 50 mm/s, Gluing and longitudinal splicing machine For 0.4 to 3 mm thickness with direct gluing. With pre-gluing of edges up to 5 mm. Machine used very little, available ex location. Features: - Separate electric motors for chain and glue application - Glue is applied to the edge of the newly inserted veneer strip, increasing the strength of the glued joint - Robust, durable stainless steel conveyor chain with weighing joints - Separate temperature, speed, and pressure adjustment - Quick and easily accessible glue reservoir for fast and simple refilling or cleaning - Multiple heating zones for individual temperature adjustment - Extended service life of glue reservoir due to integrated cooling unit - Infinitely variable feed speed INCLUDES GLUE COOLER Technical specifications: Throat depth: 900 mm Minimum veneer strip width: 45 mm Minimum veneer strip length: 300 mm Veneer strip thickness: 0.4 – 3.0 mm (up to 5 mm) Ffjdpfx Asw E Rfbodaew Veneer moisture content: max. 8 – 12 % Working height: 900 mm Feed speed: 5 – 50 m/min Heating section length: 1000 mm Maximum heating temperature: 250°C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6.0 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg

Condition: used, Year of construction: 2004, machine/vehicle number: P 04-09-002, neu U05 10 001, Spraying machine Venjakob VEN SPRAY-K All pictures only for example - Producer Venjakob - Year of construction 2004 - Current condition: not refurbished - Offer price for refurbished condition - Working width 800 mm (1000) mm - Operating side, right - Duo gun drive system - Dry filter system 4.000 m³/Std. - Diameter exhaust air pipe 400 mm Fsdsumvr Tspfx Adaofw - Transport belttransport System - Feed speed adjustable 3 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system LS 1 - Number of installed lacquer circles 1 Stk. - Airless spraying system 4 Stk. Krautzberger KAA 1300 - Number of lacquer pumps 1 Stk. - Producer lacquer pump Wagner 35-70 - Suitably for solvent based lacquer - Suitably for water based lacquer - Total connection power 7 kW, Stromaufnahme 17 A , Absicherung 35 A - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: excellent (used), Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Spindle arrangement: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left 7.5kw 4.Top 11kw 5.Top 11kw 6.Bottom 7.kw Total power 56kw Feed speed adjustable on inverter Ffsdpothk T Iefx Adaow Memory system Pneumatic pressure divided into 3 sections 4 rows of metal material feed rollers 2 rows of rubber drawing rollers 1 roller in the tabletop driven by a cardan shaft Length of input table top 1980mm Worktops made with Marathon Coating technology CE certificate Extraction stubs 6x140mm Machine dimensions 394x185x195cmH

Condition: used, Length 2700 mm Width 1100 mm Height 850 +- 150 mm engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Fsdpjnl Nqqsfx Adasfw Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Condition: excellent (used), Year of construction: 2007, operating hours: 239 h, functionality: fully functional, The machine originates from our own sawmill, which is now being gradually decommissioned. With only 238 operating hours, the root reducer is in exceptionally good technical and visual condition. Technical Data Machine type: Root Reducer Manufacturer: Baljer & Zembrod Model: WRP / SEB Fsdox N Sfkjpfx Adasfw Year of manufacture: 2007 Operating hours: approx. 238 Condition: used, fully functional Visual condition: very good (approx. 8/10) Description As the sawmill has not been operating full-time in recent years and the focus has shifted to other business areas, the root reducer has only been used occasionally and therefore exhibits minimal wear. The hydraulics, electrics, and mechanics are all fully functional. The machine operated reliably until decommissioning and was regularly inspected and professionally lubricated. Due to the planned closure of the sawmill and structural changes at the site, the machine is now being offered for sale.

Year of construction: 1998, condition: excellent (used), I sell the window production set: 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Year 1998. Ffjdpfefzzhyjx Adajw Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good !

Condition: used, Söderhamns Rotary Debarker Cambio 85 - 66 - A Diameter: 10 - 66 cm Main motor: 30 kW Ffsdpfx Ajxtc Afedaow

Condition: used, Number of milling spindles 2 St. fence 1 St. workpiece ja yes STEGHERR Cross rung milling machine, Type KSF-mini ----- Including stop ruler with measuring scale and sliding stop. Tools included. Specialized jointer for the efficient production of cross-mustard joints. The KSF-mini cross-mustard jointer is the product of STEGHERR's extensive experience in building these specialized jointers for cross-mustard joints. With the KSF-mini, all common cross-mustard joints can be produced quickly and precisely. Even profiled joints can be machined on the KSF-mini. Precise routing is achieved because the workpiece is machined on three sides in a single clamping operation. The tool is driven by two three-phase motors; the workpieces are clamped pneumatically. The profile cutter is designed for the joint width. The saw blades that perform the flattening can be adjusted to the dimensions of the profile cutter using spacers. Fsdpswi Upfofx Adaofw The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. Motor: 2.2 kW, 380 V, 50 Hz Pneumatic pressure: 6 bar Included: ----- Table base Foot switch Tools as shown in the pictures: 1 profile cutter 3 saw blades (corresponds to a 10 mm web width) Fence ruler with measuring scale and sliding stop as shown in the pictures. Installation dimensions approx. L x W x H: 1,330 x 570 x 1,430 mm Weight: approx. 150 kg (All technical specifications according to the manufacturer, without guarantee!)

Condition: used, Weinig Unimat 23 Technical data Working width 30 - 230 mm working height 19 - 200 mm elevated on pedestal u- re-li-o-u.o Fodpfxjncc Igs Adaefw without feeder only machine machine is dismantled, immediately available Transport can be organized