Planer

Weinig Unimat 500

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 107402, spindle diameter: 40 mm, number of spindles: 4, Equipment: CE marking, TECHNICAL DETAILS Number of spindles: 4 pcs. Spindle diameter: 40 mm Infeed table length: 1,780 mm MACHINE DETAILS Lrodsxw R Rlspfx Afzew Dimensions (L x W x H): 2,170 x 4,600 x 1,830 mm Feed motor: 5.2 kW Feed drive: Cardan shaft drive Extraction nozzle diameter: 140 mm Voltage: 400 V EQUIPMENT CE marking Note: The machine’s bearings are in poor condition.

Condition: good (used), Year of construction: 1997, Technically in good condition and functional. Year of manufacture 1997. Lrsdpfx Aown Dbnefzow Max. turning diameter 250 mm. Max. diameter over bed 530 mm. Max. turning length 500 mm. Length x Width x Height approx. 3315 mm, 1895 mm, 1900 mm. Machine weight approx. 6 tons.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, tool diameter: 140 mm, warranty duration: 3 months, shaft diameter: 40 mm, number of spindles: 5, extraction connection diameter: 140 mm, input frequency: 50 Hz, feed roller diameter: 140 mm, table width: 230 mm, blade shaft diameter: 40 mm, Equipment: cabin, motor brake, Weinig Unimat 500 four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle arrangement: 1. Bottom 7.5kw 2. Right 3. Left 11kw 4. Top 7.5kw 5. Bottom 5.5kw Powercom system Pneumatic clamps divided into 4 sections Lrsdsv Nkufspfx Afzew Feed speed regulated by means of an inverter Feed drive on cardans Infeed table length 1970mm CE certificate

Condition: excellent (used), Year of construction: 2008, Weinig Unimat 500 Year of manufacture: 2008 Planing width: 260 mm Planing height: 120 mm Infeed table length: 2,500 mm Feed speed: 5 - 30 m/min Feed motor: 4 kW Automatic positioning of the left and top spindle Ledpfx Aexdm Tvefzsrw Spindle positions: Bottom 7.5 kW Right ) Left ) 11 kW Top 11 kW Bottom 7.5 kW

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed - Seperate motor per spindle Lsdpfx Aoqprk Tefzorw - Roller infeed Cardanic drive - Infeed from magazine - Motoric adjustment Planing height - Lubrication pump automatic - WEINIG Face-milling cutter - WEINIG EM 15 - Total connection: 45 kW

Condition: used, Year of construction: 2005, Weinig Unimat 500 Moulding machine Description; Dimensions of the infeed table: 2500 mm Number of axes: 5 Spindle Sequence: Bottom-right-left-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Planing height: 12 / 120 mm Throughput: 24m/min Groove bed: No Other comments:- Lrsdpfxjw Ebace Afzow (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Four-side planer WEINIG Unimat 500 Memory system control, 3 axes controlled from the operator panel (width, height, pressure roller positioning), Grooved table, cutterhead arrangement and motor power: bottom head 7.5 kW, right and left 11 kW each, top 11 kW, top 5.5 kW, and bottom 5.5 kW, max planing width 230 mm, max planing height 120 mm, spindles fully adjustable, spindle diameter 40 mm, Lrodpfx Asw Dn I Rsfzjw feed via cardan shafts with stepless adjustment, central lubrication, machine in original, very good condition. Everything works perfectly. Machine dimensions: length: 470 cm, width: 200 cm, height: 200 cm, weight approx. 3000 kg.

Condition: good (used), functionality: fully functional, Lisec IG-line for double and triple glass units up to 2500 x 1600 mm, year 1993 - 1999, consisting of: RTV-38/16WE, washing machine inlet conveyor, 1993 VHW-16V8, glass washing machine with 8 brushes for low-e, 2 hot water tanks, 2 sand filters, and blower, 1993 RTVB-16/16ST, washing machine outlet conveyor, 1997 Sofsolution LineScanner RTVB-11/16 ST, inlet conveyor frame set, 1997 RSVB-27/16, frame set section, 1997 RTVB-27/16MZ, measuring section for gas filling press, 1997 FPS-25/16U, gas filling press for Argon, 1997 RTVB-22/16ST, press outlet conveyor 1, 1997 RTVB-22/16ST, press outlet conveyor 2, 1997 RTVB-27/16ST, press outlet conveyor 3, 1997 RTVB-11/16, inlet conveyor for cork applicator, 1997 APK-3/16, automatic cork application device, 1997 RTVB-11/16, outlet conveyor for cork applicator, 1997 RTVB-11/16VE, inlet conveyor sealing robot, 1999 VL-1N/16, automatic sealing machine for double and triple glass units, 1999 VLA-25, VL-extension with corner correction rollers, 1999 Lrodsr Iil Eepfx Afzew DOS-1/PU, mix and metering station for PU, including nozzle purching device,1999

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/top/bottom spindles diameter 40mm Memory System control Ljdpfx Asw Afcvofzorw table lubrication spindles speed 6000 RPM

Condition: ready for operation (used), Technical characteristics Capacity : 230 x 120 mm Feeding speed 5-30 m/min 2500 mm infeed table Digital axis positioning 5 shafts : Lower shaft 7.5kW Right left shapers 11kW Upper planer 11kW Lower planer 7,5kW Ljdpfjuarxzox Afzjrw Power and Motors Voltage: 400 V Pluging: Three-phased Power: 40 Kw Overall dimensions

Condition: used, Holz Her Accura 1556 Premium Heavy-duty version with full equipment Edge thickness: 0.4 – 20 mm 18.5" touchscreen control in 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motorized, adjustable infeed fence Pre-milling unit for processing before glue application station with 2 NC servo axes Syncro edge magazine, fully automatic for coil and strip material MOT3, with 2 motorized hold-down devices GLU-JET automatic gluing unit. Cartridge + PUR bonding. Thin-film technology Adhesive height adjustment / contact nozzle Lredpfjxnmu Iox Afzsw Maximum edge height: 60 mm Pressure unit with 4 motor-pneumatic rollers. NC servo axis End trimming unit for coils and strips up to 20 mm edge thickness, with electro-pneumatic adjustment of the trimming saws from 0–10° bevel Flush milling unit 20 mm MOT3, motorized horizontal adjustment Multi-function milling unit MOT6 with multifunctional milling technology Flush milling 8 mm Radius milling R1, 3; R2 (2x) Bevel milling up to 45° Copy milling unit MOT4, with automatic tool changer MOT2 and oscillating probe, corner copying, postforming corners, with 4 NC control axes, for milling top and bottom longitudinal edges and copy milling of the front and rear vertical end edges. Working height 60 mm. Radius R1, 3; R2 (2x); bevel 45° Scraper unit MOT8 incl. high-gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); 45° bevel Nesting package Surface scraper unit with pre and post sensor Demand-controlled, oscillating buffing unit for final cleaning and edge polishing with 2 textile wheels Spraying equipment at infeed and outfeed, as well as antistatic agent at the pressure unit Infeed area with electronically controlled separating agent spraying device Pressure unit with electronically controlled antistatic agent spraying device Outfeed area with electronically controlled cleaning agent spraying device including cleaning agent Automatic chain lubrication Barcode scanner MACHINE IS FACTORY SERVICED AND IN TOP CONDITION Year of manufacture: 2021 / Leasing options available Machine is connected and ready for demonstration at the exhibition center Available from stock Lieboch

Condition: excellent (used), Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Spindle arrangement: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left 7.5kw 4.Top 11kw 5.Top 11kw Ljdpsthk T Iofx Afzerw 6.Bottom 7.kw Total power 56kw Feed speed adjustable on inverter Memory system Pneumatic pressure divided into 3 sections 4 rows of metal material feed rollers 2 rows of rubber drawing rollers 1 roller in the tabletop driven by a cardan shaft Length of input table top 1980mm Worktops made with Marathon Coating technology CE certificate Extraction stubs 6x140mm Machine dimensions 394x185x195cmH

Year of construction: 2005, condition: ready for operation (used), Additional Equipment Includes approx. 70 cutter heads Z4 Several hundred new serrated-back knife blanks Lredpfxewkxd Ao Afzjw This WEINIG Unimat 500 was manufactured in 2005. A robust woodworking machine featuring a working range of 230 x 120 mm and five spindles, it ensures efficient processing with variable feed speeds from 4 to 30 m/min. Spindle power outputs include 4 kW for infeed and outfeed, and 7.5 kW for right/left and top spindles. Consider the opportunity to buy this WEINIG Unimat 500 woodworking machine. Contact us for more information about this machine. Application Types Other Woodworking Machinery

Condition: excellent (used), Year of construction: 2019, operating hours: 278 h, Max. Workpiece Size for Peripheral Milling: X = 3,620 mm Maximum Travel Distances: X = 3,865 mm Minimum Room Height: 3.20 m Machining in Y and Z Y = 1,600 mm; Maximum Panel Width 2,000 mm Maximum Workpiece Height 300 mm Measured from the top edge of the vacuum suction cup 125 mm MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured via USB dongle for the machine CabinetControl Base Software for furniture design and production CAMPUS V7 PLUS, software for CNC machining centers ADDITIONAL MODULE – HIGH-SPEED MILLING Control Siemens industrial PC control Handheld remote control unit for machine operation MILLING HEAD 5-axis head 7840, Power: 12 kW n(max) = 0 - 24,000 rpm, steplessly adjustable Cardanic; C-axis +/- 360° rotatable, A-axis +/- 180° rotatable Liquid cooling (cooling unit included) with HSK-F 63 tool holding fixture Max. Tool weight: 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster for increasing the standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, including saw unit 18 individually selectable vertical spindles Arranged in L-shape, 11+2 in X, 6 in Y direction, 32 mm pitch n(max) 1,000 - 5,710 rpm steplessly adjustable 6 horizontal spindles 2 double drilling spindles in X 1 double drilling spindle in Y Including saw unit Integrated saw unit for sawing / grooving in X direction n(max) 1,000 - 7,330 rpm steplessly adjustable MACHINE TABLE Machine table with 6 consoles, pneumatically clamped, adjustable in X direction Display and positioning of consoles and suction cups via software program 2 lateral stops at field A and D, 2 large buttons for clamping and releasing workpieces, 2 tape-measure position displays for console positioning in X relative to stop at field A/D, tape-measure positioning for suction cups at each console in Y relative to rear stop STOPS 2 additional processing fields at the front for 6 consoles (4-field processing) 4 pneumatically controlled stops per field, including 1 stop per console and one side stop in X direction LOADING AIDS 4 pneumatically liftable and lowerable loading aids for easy handling of heavy workpieces TOOL CHANGERS Tool changer 7996, 18-position magazine (carousel), automatically moves in X-axis direction Moving tool changer 7886, 1-position saw blade magazine Specifically for large saw blade diameters up to 350 mm Pick-up system installed on the gantry, pneumatically operated Max. Tool diameter: Ø 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running LED lighting for the machining area. SAFETY OPTIONS Safety enclosure according to CE standards Protective fencing on the side and rear Lsdpfx Ajxfaf Ujfzjrw EQUIPMENT VARIANTS AND ACCESSORIES – LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field processing and large workpieces. 2 controlled pneumatic modules for max. 5 frame clamping elements per field A/D Each module can simultaneously control up to 5 frame clamping elements. Simultaneous opening/closing of connected frame clamping elements, including foot pedal for operation, max. 2 modules per field A and field D available; OPTIONAL: LASER - Laser pointer Consisting of two laser pointers for positioning the vacuum suction cups

Condition: excellent (used), functionality: fully functional, Description of the machine working width 230mm working height 130mm 5 heads + chamfering unit arrangement of heads: bottom/right/left/upper/lower rotation of heads 6000 rpm Lrsdpjvit Inefx Afzow Memory system smooth adjustment of the feed speed up to 30m/min feed on cardan shafts table top lubrication pneumatic pressure feeders of pulling rollers