Band saw

Wimmer BN 110

Condition: used, Double edger TRAK-MET PTF2-4, year of manufacture 2022, as new, feed rate 0.40 m/min, incl. laser, 15 kW, 2 knives, 1150 kg Fodpfx Asvr I H Dog Rsft Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Year of construction: 2023, operating hours: 300 h, functionality: fully functional, cutting length (max.): 6,100 mm, total length: 8,000 mm, overall weight: 3,000 kg, type of input current: three-phase, height adjustment type: electric, cutting width (max.): 650 mm, saw band width: 50 mm, Equipment: chassis, Seldom-used Woodmizer LT70 Mobile Cutting length: 6.10m Electric motor: 25 HP Model for 50mm saw bands Cut thickness calculator: Accuset2 Band lubrication system: Lube-Mizer Electric height adjustment Fodpfxswn Tygo Ag Roft Electric feed Hydraulic package Plus3: log turner, log loader, 2x vertical side supports, manual side support, support rollers (one powered), center clamp A-bed rails Chassis (3000kg) with road approval Debarker Radio remote control Approx. 300 hours of use Year of manufacture: 2023 Viewing possible in 16775 Gransee OT Neulögow

Condition: good (used), The debarker is great for debarking hardwood as well as softwood. Carriage made of heavy steel construction 5 pairs of drive wheels Milling arm made of heavy steel construction Hydraulic milling head 22 kW motor Ffodpfx Agstuyr Ij Ret Log feeder shown in the picture is not part of the ad and is available for an extra charge of 25,000 PLN / 5,500 EUR

Year of construction: 1980, condition: good (used), Stellite forming machine VOLLMER GF10U Blade thickness 1 to 4mm Width band saw blades 60 to 420 mm Ffsdpsgxb Ebjfx Ag Rst circular saw blades 300 to 1.200 mm Ø electric feed drive via gear motor

Condition: good (used), Year of construction: 1990, 4-shaft shredder from the well-known manufacturer Untha, type RS 30. 2 x 7.5 kW. The gearbox was overhauled and new cutter discs were installed on the shredder 3 years ago. Since then, it has hardly been used. Repair costs amounted to €5,300. Fedpexpn Hnsfx Ag Rjft

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Ffedpfx Agev Hwk Ue Rst Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Grapple: included Crane arrangement: behind the cabin Cab side: middle !! Sold on behalf of the customer!!

Condition: used, Woodmizer EG300 Twin Blade Edger, year 2019, in good condition Technical data: Pass-through width: 550 mm Cutting height: 60 mm Minimum cutting width: 60 mm Maximum cutting width: 410 mm Width adjustment: Electric Minimum board length: 700 mm Saw blade diameter: 2 x 350 mm Fjdpfx Ajx H Uhieg Rjft Motor: 15 kW Feed speed: Infinitely variable 0 to 25 m/min Machine length with tables: 4900 mm Machine width: 1630 mm Machine height: 1250 mm Working height: 900 mm Weight: 988 kg Price subject to change. Errors and misprints excepted.

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Work table dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. depth of cut in one pass: 8 mm Min. workpiece length: 260 mm Cutter shaft diameter: 120 mm 4 Knives: 35 x 3 x 640 mm Cutter shaft speed: 4,500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction connection diameter: 150 mm Standard Equipment and Accessories - Automatic thickness table elevation with 2 speeds and micrometric adjustment Fodpfjw Tfybjx Ag Rsft - Thickness table with vertical movement via 4 steel-threaded spindles - Electronic control with 2 axes for setting: * the input value of the thickness table * the feed speed - Stepless feed speed adjustment from 4 to 20 m/min via inverter - Feed speed automatically adapts in relation to the main motor’s maximum power consumption - Upper ribbed steel roller at infeed - Two upper rubber-coated feed rollers at outfeed - Replaceable feed rollers - Independent pneumatic pressure regulation of the upper feed rollers - Motor power: 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta starting: * S1: 7.5 kW / 10 HP / 50 Hz (8.8 kW / 12 HP / 60 Hz) * S6 -40%: 9 kW / 12 HP / 50 Hz (11 kW / 15 HP / 60 Hz) Safety/Protection - Noise dampening protection at infeed and outfeed - Micro safety switch at protective cover - Emergency stop switch at front and rear of the machine - Lockable main switch - Motor protection switch - Low-voltage circuit (110 Volt) - Automatic motor brake - CE Declaration of Conformity Product code: S 7 109999 Standard safety regulations 530314 TERSA – Cutter shaft (monoblock version) with disposable double-edged knives 083201 Base frame 930731 Volt 400 EU R02017 L’invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short-term Location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2024, cutting length (max.): 12,000 mm, cutting width (max.): 1,000 mm, Small horizontal saw bench WRAVOR WRC 1000, the smallest in the range, fixed: 1000mm diameter solid wheels for a cutting diameter of 1M, sawing length adaptable according to the possible extensions of the chassis: currently 8M (12M chassis) Hydraulic equipment (claws/rollers, centerers, log turners) and mechanical • 4 hydraulic loading arms attached to the chassis • 3 pairs of claws / space for 3 others possible as an option • hydraulic lifting of the log on clamps, with 2 mechanical rollers and 1 driven roller, with the possibility of adjusting the height • Hydraulic centerers (up/down movement): 4 • Mechanical supports: 3 • Hydraulic lifting rollers: 3 • 90° angle centerers up/down movement: 3 • Standard hydraulic turners: 2 • 40l hydraulic generator tank and 16l for the 4Kw pump • Overhead electric cable fixed on rail and rollers Ffsdpfx Ajvr Ez Eog Ret • Mechanical table for outputting wood (2.5M, possible in hydraulic, tilting, 4M, connected to the control station as an option) Control station currently separate from the saw bench, Basic control system, Wravor program, Joysticks and head sawdust suction system as options Hydraulic adjustment of the blade tension / Electric scoring saw / Hydraulic hand for pushing sawn wood / Right/Left blade guides: centralization of blade lubrication / Head movement (worm screw)... PV 45 blade, length 6390, width 110mm

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors. Fsdpot Hg Huofx Ag Roft