Cyclone separator

WISSMATEC Zyklon

Condition: refurbished (used), “Bakker Magnetics 29.723/12 – 800mm.” for Sale Manufacturer: Bakker Magnetics Type: 29.723/12 Belt widthness: 800 mm (New belt) Included: – New Control-unit Nwjdjw R N Tmopfx Aphek

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions. Nwjdpfx Apjxlngaehjk

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades Nwjdpow Dn S Aefx Aphsk With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes non-ferrous metals from steel waste non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. Nodpfx Apeu Dg Uhohewk We also have larger sizes of eddy current separators - catalog in documents.

Condition: good (used), functionality: fully functional, “Steinert NES 125 220 E 5009” for Sale Nwjdpfxsxb S Exj Aphok Manufacturer: Steinert Type: NES 125 220 E 5009 Belt widthness: 1.250 mm (New belt) With new control-unit. Overhauled, balanced, sandblasted and painted.

Condition: excellent (used), Year of construction: 2014, Scheuch cyclone with rotary valve and spark extinguisher for wood chips Cyclone as bunker or silo structure with attached rotary valve Designation: fru v 1000-04/014-B Nwedeuvdplspfx Aphek Serial No.:/Year: F-1633/14 System is dismantled and immediately available

Year of construction: 2019, condition: like new (used), “Unbalance Exciters / Erregers“ for Sale Nwsdpfx Ajglvvijphok Over 60 Pcs. of Unbalance Exciters in stock! Unused, Good Used and Overhauled! From Manufacturers like: Schenck, Jöst, Krupp, Siebtechnik, etc. Schenck: – Schenck D 00 – Schenck DF 2 – Schenck D 3 – Schenck DF 3 – Schenck DF 300 S – Schenck DF 401 S – Schenck DF 5 – Schenck DF 5L – Schenck DF 5S – Schenck DF 5V – Schenck DF 501S – Schenck DF 501V – Schenck DF 7 Siebtechnik: – Siebtechnik GR 2 – Siebtechnik GR 3 – Siebtechnik GR 30 – Siebtechnik GR 32 – Siebtechnik GR 31 – Siebtechnik GR 40 – Siebtechnik GR 41 Krupp: – Krupp DU 1 – Krupp DU 2 – Krupp DU 200 – Krupp DU 3 Jöst / Mogensen: – Jöst JR 200 – Jöst JR 206 – Jöst JR 208 – Jöst JR 400 – Jöst JR 408 – Jöst JU 6 - Jöst JU 600 – Jöst JR 600 – Jöst JR 608 – Jöst JU 800 Honert: – Honert H 2 U 20 – Honert H 2 U 40 – Honert H 2 U 50 Friedrich / Cyrus – Friedrich UE 20 S – Friedrich UE 45 UHDE: – UHDE P 1500

Condition: new, functionality: fully functional, machine/vehicle number: SBT 2057, Year of construction: 2018, 2-deck screening machine 6000 x 1600 x 2000 mm. This machine was purchased by us in 2018 but has never been used. Current screen deck configuration: upper deck equipped with PU screen with 60 mm aperture, lower deck is a flip-flop screen for separation down to 4 mm. Delivery is complete with drive line, spring supports, and springs. Nsdpfx Ajulf Dpophowk

Condition: used, functionality: unexamined, machine/vehicle number: siehe Beschreibung, Dust extraction system: - 57,000 m³/h - Bag filter type RTFAE550S-JET-SF (without filter bags, the old ones have been disposed of) - Screw conveyor type TRFS400ATEX - Rotary valve type RTZ5050ATEX-S-CR-SEW - Cyclone type RTZA2500-D - Baffle silencer - Compressed air compressors + tank type ALUP Largo 15, 15 kW motor Nwodpsy Rzihsfx Aphok

Condition: used, mileage: 5,45,407 km, power: 355 kW (482.67 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 14 m³, loading space length: 6,450 mm, loading space width: 2,480 mm, loading space height: 800 mm, Year of construction: 2018, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, DAF XF 480 FAN with Fassi F135 A2.22 Building Materials Crane VIN: G207799 Chassis / Attachments: * Full air suspension * Lifting axle * Wheelbase: 4,800 mm / 1,400 mm * Tyres: 315/80 R22.5 * Tyre tread remaining: Front approx. 80/80%, Middle approx. 80%, Rear approx. 60% * 1 x Aluminium tank 620 l * 1 x AdBlue tank * 1 x Hydraulic oil tank * 1 x PVC toolbox * 1 x Stainless steel toolbox * Fixed trailer coupling * Duomat + 2 ladders Superstructure: * Reichert body BP6500K-H * Fassi F135 A2.22 building materials crane with top seat * 2 extensions * 2 rear outriggers * Drop sides 0.80 m * Body dimensions: 6.45 m x 2.48 m x 0.80 m * Lashing rings * Aluminium floor * Pallet fork, 360° rotatable Cab / Driver’s compartment: * 2 bunks * Roof hatch * Automatic climate control * Auxiliary heating * Navigation system * Hands-free kit * CD radio with USB / AUX / BT * CB radio Engine / Transmission: * 355 kW // 12,902 cm³ // Euro 6 c * Automatic transmission * ZF intarder * Differential lock Nwsdpfx Apjwwyd Rohok Weights: * Gross vehicle weight: 26,000 kg * Payload: 11,520 kg * Unladen weight: 14,480 kg Miscellaneous: * German vehicle * 1 previous owner ---- New general inspection / safety inspection or gross weight downgrading/upgrading on request. We’re also happy to assist you in obtaining export/temporary license plates, and can arrange transport of your purchased vehicle within Germany. Get in touch with us! ---- We speak: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to prior sale, changes, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With years of experience in reconditioning and selling commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in selling new and used commercial vehicles. On 11,000 m², you’ll find a large selection of vehicles. Our company philosophy is based on fairness and professionalism. Customer satisfaction is our top priority, so we offer a comprehensive all-in-one service package and provide you a dedicated contact person who will guide you through the buying or selling process. See for yourself! Our services for you: Vehicle loading We’re happy to assist in loading your purchased vehicles. Organizing special transports We’re happy to help organize special transport for you. Temporary/export license plates We’re happy to assist in obtaining export or short-term plates. Customs formalities We’re happy to assist with customs procedures.