Reinforced Steel - Bending Machine

ZOPF P38 Evo

Condition: used, Technical details: bending angle max.: 0 - 225 ° working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Gsdpjx Adbnefx Aflsuf Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction Gjdpfx Aotr U Hljfljuf → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: used, Heavy-duty wood lathe with hand copy attachment, sold by private owner with extensive accessories, fully equipped, some items in original packaging. Used, excellent condition, low operating hours. Make: Flott-Arnz. Centre distance approx. 1200 mm, centre height approx. 250 mm. Hand copying device with approx. 1000 mm copy length. Four-prong drive centre, live centre included. 5 spindle speeds: 500 - 2500 rpm. Location: 97447 Gerolzhofen, loaded on truck, unpacked. Sale as inspected, in current condition, without any warranty or guarantee. Gujdsyb S Hkepfx Aflsf

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, number of rollers: 3, shaft diameter: 35 mm, rotational speed (max.): 30 rpm, overall weight: 490 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: CE marking, documentation/manual, BPR BA 35 CNC Three-roll ring bending machine, hydraulic Technical data: Gjdswwt Hfjpfx Afljuf Shaft diameter: 35 mm Roll diameter: on request Shafts made of durable steel, hardened and ground Drive motor: 1.1 kW, 50 Hz Hydraulic pump motor: 3 kW Shaft speed (variable): 0–30 rpm Working position: horizontal and vertical Separate control panel External dimensions: 740 x 1020 x 1110 mm Control panel dimensions: 600 x 710 x 1120 mm Weight: 490 kg Hydraulic adjustment of the side roll Three powered rollers with smooth surface Electronic control BPR Probending CNC Hydraulic cylinder pressing force: 5500 kg Working pressure: 190 bar Accessories included: Rollers for 1" pipe Straightening rollers Operator's key Operating manual

Year of construction: 1991, condition: good (used), machine/vehicle number: 900 1241, disk of circular saw-Ø: 275 mm cutting area at 90° round: 90 mm cutting area at 90° square: 75 x 75 mm cutting area in mitre at 45° square: 75 x 75 mm Guodpom Twgwsfx Afljf disk rotations: 40/80 upm engine: 380 V, 1/1/2 kW space needed: 700 x 600 x 1580 mm weight: ca. 180 kg

Year of construction: 1990, condition: good (used), Offer 20191 Year of manufacture approx. 1990, overhauled in 2002 Technical data: - Bending capacity at 45 kg/mm² up to approx. Ø 25 x 3 mm - Bending angle selectable left and right - Hydraulic double-sided bending function - Hydraulic approach - Drive: 400 V / 11 kW - Space requirement approx. W 1750 x H 2200 x D 2300 mm - Weight approx. 1600 kg - including: - Bending angle adjustment - Hydraulic tension Guedpfxehrdmbj Afljf - Bending tools

Condition: as good as new (ex-display), Year of construction: 2025, tube diameter 10.0 - 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 1.30 U/min voltage 400 Volt total power requirement 1.5 kW weight 110 kg range L-W-H 400 x 450 x 570 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 42.0 x 3.56 mm Gujdpfxsxab Hve Aflsf - Gas tube capacity: 1" 1/4" Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: used, heavy-duty copy lathe, used, in good condition, with extensive accessories, including disc grinding attachment. Manufacturer MVM, model T1500. Centre distance approx. 1450 mm, centre height approx. 220 mm. Manual copying device. 8 speeds 700 – 3100 rpm, stepless. Motor 2.5 kW. Space required approx. 2700 x 800 x 1500 mm. Weight approx. 500 kg. Location: 97447 Gerolzhofen, loaded free, unpacked. Delivery in as-inspected condition, without guarantee or warranty. Gedpfxoy Ay A Rj Afljuf

Condition: used, Year of construction: 2004, Technical details: tube diameter: 20 mm bending radius max.: 100 mm control for program: S7-300 tube pipe draw up length: 2270 mm air pressure - required: 7 bar total power requirement: 15 kW Bending speed: 540 °/sec control voltage: 24 V / DC V connection voltage: 400V / 50Hz / 3 Ph V dimensions L x W x H: Biegeaggregat: 1,8 x 1,4 x 1,6 m dimensions L x W x H: Zuführung: 1,2 x 1,5 x 1,55 m dimension machine xH: 3,0 x 1,0 x 1,2 m Gujdju Ibzkspfx Aflsf Mandrel tube bending machine Bending direction RIGHT Operation via SIMANTIC Panel PC control unit Pneumatics: Pressure 7 bar; flow rate 200 l/min. Hydraulics: Pressure 150 bar; flow rate 6.8 l/min. Equipment/Accessories: -oil drip tray 3.1 x 0.96 x 0.02m -Spare parts and accessories *

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: D08L/7603, Offer Number: D08L/7603 Machinetype: straightening and cutting machine Make: DEITERS Type: DaE Constr. year: 1977 diameter range: 1-8 mm cutting length: 3000 mm speed - meters/min: 13-56 Guodpfxjwi S Nvo Aflsf Location: In our warehouse