Condition: like new (used), Year of construction: 2017, operating hours: 2,080 h, functionality: fully functional, machine/vehicle number: 10000144427, travel distance X-axis: 5,580 mm, travel distance Y-axis: 2,917 mm, travel distance Z-axis: 378 mm, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, nominal power (apparent): 13 kVA, controller manufacturer: BIESSE, controller model: BH660, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,205 mm, workpiece height (max.): 170 mm, table width: 22,005 mm, table length: 4,300 mm, rotational speed (max.): 24,000 rpm, overall weight: 3,840 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 13,200 W, number of spindles: 10, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Biesse Rover A 2243 FT CNC Machining Center with Automatic Loading/Unloading System.This 2017 machine features a large flat grid table of $4,300$ mm x $2,205$ mm, divided into a 12-segment Multizone vacuum system for independent work-holding. The machine is equipped with a powerful $13.2$ kW HSK-63F electrospindle with a maximum speed of $24,000$ rpm. Tool changes are handled by an 8-position turret magazine. A BH10L drilling unit with ten independent vertical spindles is also included.A key feature is the fully automatic material handling system, including a scissor table for pallet loading (max weight 6 tons), an alignment and labeling machine, and a servo-controlled sweeping arm for automated unloading onto the $4,800$ mm discharge conveyor belt. The machine is controlled by a BH660 CNC numerical control and includes the bSolid programming software with the bNest module for nesting operations. Gujdpfx Ahjxy S Dfj Dsk

Condition: like new (used), Year of construction: 2019, For sale: 5-axis CNC woodworking machining center manufactured in 2019, equipped with a versatile FLEX5 cutting unit offering a rotation range of 0–360° and tilt angle of 0–90°. Features an 8-slot tool changer and a C-axis on the main spindle, enhancing its precision and flexibility. It handles cross-sections from 20 x 50 mm up to 200 x 455 mm and supports wood lengths up to 13,300 mm. Guedpfx Aexalnwsh Djk

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 14-1332-015/23270, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 20 m/min, nominal power (apparent): 28 kVA, controller manufacturer: OSAI, controller model: OPEN, total height: 3,000 mm, total length: 5,400 mm, total width: 3,200 mm, overall weight: 4,100 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 12,000 W, number of spindles: 1, number of slots in tool magazine: 14, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Purchased new in Mar2024. Minimal use / like new. Fully functional and ready for immediate production. Original price: €85,000+ Key Specs 3-axis Gantry CNC (Pod & Rail) with 2 working zones Working area: 3200 × 1300 × 300 mm Speeds: 100 / 100 / 20 m/min ATC: 14 positions, HSK-63F Spindle: HSD 12 kW, air-cooled Boring head: HSD BHZ17 Controller: OSAI Open Smart Vacuum pump: Becker KVT3100 (2024) Godowlaxqspfx Ah Dsuk Premium Components Yaskawa motors, Güdel guides, Festo pneumatics, Schmalz vacuum, HSD spindle. Installation Support Remote or on-site setup assistance available. Other Details VAT not applicable (reverse charge possible). Reason for sale: downsizing for family reasons.

Condition: used, machine/vehicle number: 008277, X axis working area: 5680 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Godpfsx A Hgmox Ah Dsuk Total number of drilling spindles: 21 Total number of tool changer positions: 24

Condition: good (used), CNC machining center WEEKE OPTIMAT BHX 500 Including material feed "IgeL-ROBOT" Lower machining support Godpfx Aotd Uufsh Douk Upper machining support Workpiece length: min. 250 - max. 2500 mm Workpiece width: min. 70 - max. 1000 mm Workpiece thickness: min. 4 mm – max. 80 mm Workpiece stacking: max. 2 pieces Vector speed: X-axis (collet) = 138 m/min; Y-axis = 80 m/min; Z-axis = 50 m/min Equipment: VERTICAL DRILLING UNIT 2 V 21 HIGH SPEED 7500 HORIZONTAL DRILLING UNIT 2H4X/2Y GROOVE SAW UNIT N2 X-Y 90 MILLING UNIT F2-ETP-6 KW Barcode reader manufacturer: Datalogic Material feed "IGEL-ROBOT" .

Condition: used, Year of construction: 2006, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel length X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Gedexy Tmzjpfx Ah Djuk Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Worktable TV with 10 supports L=1500 4 working zones 2 cross lasers Vacuum pump 250 m³/h PC control Windows Vertical milling unit ISO 30 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Dongle for XILOG software Location: Nattheim

Condition: used, Year of construction: 2011, CNC Machining Center Biesse skill 15 36 G FT Year of construction 2011 Machine no. 52549 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 3765 mm Y axis 1560 mm Z axis 324 mm Inclusive - 2x vacuum pump, Busch Mink MM1322 AV; 360m³/h - Safety mats Spindle bearings need to be replaced, sounds bad. Disassembled for transport on normal trailer; 6000x2400x2400mm; Gsdpfxownh Ifj Ah Deuk Own weight 2500kg - Year: 2011 - Documentation available: No - CE certificate present: No - Drilling unit present: No - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Vacuum pump present: Yes - └ Brand: Busch Mink - └ Type: MM1322AV - └ Capacity [m³/h]: 360 - Working range X [mm]: 3765 - Working range Y [mm]: 1560 - Z-axis working range [mm]: 324 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2004, functionality: fully functional, Location: Navarra, Spain Worldwide shipping available! Dealer sale, contact us for further information! Gsdox Hp R Sjpfx Ah Dsuk Working area 3200 x 1300 mm, 7 + 1 vertical drills in X-direction, 5 + 1 vertical drills in Y-direction, 4 horizontal drills in X-direction, 2 horizontal drills in Y-direction, grooving saw in X-direction, 8-position movable tool changer, main spindle 13.5 kW, HSK-63-F interface, C-axis, 8-position tool changer at the rear of the support, console table with 6 consoles, vacuum pump capacity 98/112 m³/h.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 218, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 54 m/min, rapid traverse Z-axis: 38 m/min, controller manufacturer: OSAI, controller model: OPENkey, total height: 8,100 mm, total length: 5,100 mm, total width: 3,400 mm, spindle speed (min.): 3,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 7,400 W, number of spindles: 4, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, documentation/manual, We've lowered the price!!! NEW PRICE ONLY €165,000!!! This price is valid only until September 30, 2025! Don’t miss this opportunity! We invite you to purchase a BRAND NEW, top-quality 5-AXIS MACHINING CENTER from the renowned manufacturer FANUM. We are offering the brand new SIGMA model, supplied with a rich equipment package. The machine is entirely new; the attached specification describes its features, technical parameters, and production capabilities. FANUM is a well-established brand, widely recognized for reliability, precision, high power, and fast operating speeds. The MACHINING CENTER being offered is in BRAND NEW condition. It was purchased from FANUM Sp. z o.o. in 2021 and delivered directly by the manufacturer. The FANUM Sp. z o.o. service team performed the initial commissioning, but the machine has not been used since. Its condition is therefore absolutely NEW. Our model is exceptionally well-equipped, with almost all available options included. Currently, a comparable new machine would cost approximately €282,350 net (PLN 1,200,000 net). Gedpfx Aew E Hufjh Douk We have direct access to the manufacturer, FANUM Sp. z o.o., for technical support. Upon request, we can organize a new start-up inspection and demonstration at our location. Transportation to the new owner and installation/start-up by FANUM technicians at the destination is also possible. The offered price is for the machine itself, but we can also provide a comprehensive quotation including installation and commissioning at the new location. With a discount of more than 40% (over €117,640 net, approx. PLN 500,000 net) off the price of a new unit, this offer represents an extremely attractive value for buyers seeking to add a state-of-the-art, highly efficient machine to their facility, especially those who did not expect to acquire a modern and powerful machining center within their current budget. General information about the sales offer: • Although the machine is NEW, it was manufactured in 2021 and is sold without guarantee or warranty; • Returns are not accepted; • The price listed does not include VAT (23% for buyers in Poland), which will be added to the invoice—please verify the advertised price conditions; • Single owner. * The EUR price is based on the NBP exchange rate: 1 EUR = 4.25 PLN. Welcome to all users of the MACHINESEEKER platform. We are new to MACHINESEEKER. Please note, we are not a furniture, manufacturing, or machinery trading company. We own several properties across Poland and operate as a real estate developer, building houses and apartments in Warsaw (the capital of Poland). All machines in our offer are our own property, acquired as part of settlements with our tenants from the furniture industry. We know their history and condition, which fully corresponds with our descriptions. We maintain contact with the machine manufacturers, who can provide further technical support—Homag, Otto Martin, OMC Machinery, and FANUM. As we do not require these machines in our business, our prices are very attractive, especially since the equipment is practically unused. We offer assistance with transportation anywhere in Poland or within the EU. You are welcome to inspect the machines in person prior to purchase. Best regards.

Condition: used, Year of construction: 2008, Biesse Rover A 3.40 FT K2 Numerically controlled machining center ROVER A 3.40 FT K2 Working fields: X = 3685 mm; Y =1290 mm; Z = 160 mm Guodpsx Afvtjfx Ah Dek The composition includes: Automatic lubrication system FT Work Table 4 front stops + 4 back stops equipped with pneumatic system and sensors. 4 side stops equipped with pneumatic system and sensors. Vacuum Pump 300 m3/h 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowingunit Flange for the assembly of aggregates on the electrospindle Prearrangement for operating device with 360° interpolation and gear transmission. Boring head BH 21 L Revolving tool changer with 18 places Prearrangement for the assembly of the automatic unloading device for nested-based machined panels Controls on remote keyboard Numerical Control XP600 BIESSEWORKS BIESSE NEST Module Air conditioner for electric cabinet Inverter Safety devices with mats (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2005, operating hours: 6,650 h, functionality: fully functional, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Bosh Rexroth, workpiece height (max.): 290 mm, workpiece weight (max.): 500 kg, table width: 1,300 mm, table length: 4,000 mm, rotational speed (min.): 1,200 rpm, rotational speed (max.): 24,000 rpm, overall weight: 5,500 kg, spindle speed (min.): 1,200 rpm, spindle motor power: 10,000 W, spindle nose: HSK63F, number of spindles: 1, number of slots in tool magazine: 15, tool length: 240 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, ArtisX6 BRIEF DESCRIPTION. 1 10 kW working electrospindle; constant power in the range of 12,000 to. 24,000 1/min; working range: 1200–24,0001/min. Tool socket: HSK63F. Axis working ranges: X = 4600 mm, Y = 1,550 mm, Z = 400 mm, B axis = 180°, C axis= 360° Axis approach speeds: in the X/Y plane = 85 m/min; Z = 20 m/min Gateway: 290 mm 1 automatic disc tool magazine, 15-position. Max. tool length: 240mm, max. tool weight: 6kg L-shaped drilling unit, power 2.2 kW, spindle speed 4500 1/min, spacing 32 mm Machine table: wooden (high-quality waterproof plywood). Dimensions: 4000 x 1300 mm 2 x 4 pneumatically extendable base pins (fi 25 mm, stroke 115 mm). Tool set: yes (including some never used) Table division into two stations for alternating work 1 vacuum pump with a capacity of 250 m3/h and a surge tank with a capacity of 500 l Machine safety (EU standard): BUMPER bumper system (without the use of mats, photocells, etc.) Bosch Rexroth PNC control, BTV 16 industrial PC computer, Pentium III processor, RAM 256 MB, HD 10 GB, network card Profibus SERCOS drive control system Data input: USB-Stick, local network Operating system: Windows2000. ProEmbSys Touch screen CAD/CAM software: Alpha/CAM Movable control panel with manual control panel Gjdpowh Aidofx Ah Deuk Remote diagnostics Interpolation: 5 linear, 2 ½ D circular Connected power: approx. 25 kVA Central lubrication Weight: 5.5 t Machine in very good condition, 100% efficient. Storage location: northern Poland

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Gujdoxy Tmnepfx Ah Dek

Condition: used, Year of construction: 2014, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 89867 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Safety mat - CNC options: Label machine, Loading system, Unloading system Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Guedpsxr Evlsfx Ah Djk Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2019, operating hours: 1,180 h, functionality: fully functional, machine/vehicle number: 4596, travel distance X-axis: 16,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 31 kVA, torque: 50 Nm, controller manufacturer: Siemens, controller model: 840D, workpiece length (max.): 14,000 mm, workpiece width (max.): 4,000 mm, workpiece height (max.): 400 mm, table width: 4,000 mm, table height: 700 mm, table length: 14,000 mm, spindle speed (max.): 24,000 rpm, operating hours of spindle: 1,180 h, distance table center to spindle nose: 590 mm, spindle motor power: 31,000 W, number of spindles: 1, number of slots in tool magazine: 24, tool length: 240 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Reichenbacher Vision III with Vacuum Table: - 5-axis machining for materials such as wood or composites (GRP sandwich panels) - Vacuum table with 64 zones - 5-axis unit with gimbal-mounted spindle - Air nozzle with ionization - Torque support with compressed air feed-through - Centralized lubrication - 24-position rotary tool changer - Pick-up station for 500 mm saw blade - 5-axis extraction hood (height adjustable) - Extraction slot on the gantry - Siemens Sinumerik 840D sl control system - Solid CAM post-processor - 19" touchscreen display - Handheld controller option Gujdpjxcnrdefx Ah Dek - 3D measuring probe (infrared) - Measuring stylus with disc attachment - Vibration monitoring (IFM) - Minimum quantity lubrication with 9 l tank - Tool measurement and breakage detection. "LaserControl" system - Enclosed gantry with safety edges in bumper version - UPS

Condition: used, Year of construction: 2009, functionality: fully functional, Location: Navarra, Spain Worldwide shipping available! Sales via intermediary – please contact us for more information! - Total connected load: 20 kW - Travel distances: X 3550 mm, Y 1680 mm, Z 275 mm - Travel speeds: X 80 m/min, Y 80 m/min, Z 20 m/min - 2 aggregate pick-up positions - 18-position plate changer - Main milling spindle with C-axis tool holder HSK 63 F - Milling spindle power: 9 kW - Additional heavy-duty horizontal boring bar on the Y-axis Gjdpfx Ahex Hi Tas Deuk - Swiveling grooving saw - 5 vertical drilling spindles on the Y-axis - 10 vertical drilling spindles on the X-axis - 2 + 2 horizontal drilling spindles on the X-axis - 1 + 1 horizontal drilling spindle on the Y-axis - Safety stops left/right - 6 consoles, depth approx. 1300 mm - Various vacuum clamps - Working area X: 3060 mm - Working area Y: 1210 mm, front stop row - Working area: 260 mm, rear stop row, 100 mm spacing - Laser positioning for vacuum clamp - Vacuum pump: BECKER PICCHIO 2200 - Year of manufacture: 2009 - Max. vacuum capacity: 100 m³/h - Motor: 1.8/2.5 kW

Condition: ready for operation (used), Operation in X, Y, Z axes Godpfxex An Avs Ah Djuk Horizontal drills on X-axis – 10 pcs Horizontal drills on Y-axis – 2 pcs Vertical drills on Y-axis – 14 pcs Vacuum pump 3 kW Capability for dual-field operation 6 beams Milling unit 2 work zones 3000 kg Year of manufacture: 1992

Condition: used, machine/vehicle number: 008173, X axis working area: 4430 mm Y axis working area: 1540 mm Working Table: Pod and Rail Main Electrospindle power: 10 KW Gjdpsx A Tdfofx Ah Douk Number of controlled axes: 4 axes Number of controlled axes: 4 axes Total number of drilling spindles: 29 Total number of tool changer positions: 7

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Pass-through height. Operator terminal: 24" LED color display. Handheld terminal for controlling axis speeds. Software: "Woodflash". Vacuum pump 90 m³/h, 50 Hz or 108 m³/h, 60 Hz. Milling spindle 12 kW HSK F63 (12,000 rpm). 12-position linear tool changer on the left side of the machine frame + pickup position. Drilling head DH 16 4H 2S: Vertically 12 spindles, horizontally 4 spindles, 2 grooving saws. Storage location: Supplier. Gusdsxy Tlwopfx Ah Dsk

Condition: used, Year of construction: 2020, total height: 2,500 mm, total length: 5,000 mm, total width: 2,400 mm, Empty weight: 2.500 kg CNC machining centre SCM Morbidelli N100 12 A Brand SCM Type Morbidelli N100 12 A Year of construction 2020 Serial number AM00002846 Machining table dimensions 2486x1255 mm (LxW) Groove pattern 40 mm distance Distance between holes vacuum cups 120 mm Equipped with 3 reference gauges Table has 1 vacuum field Table working range Godpfx Ahowwa Hls Dsuk X axis 2486 mm Y axis 1255 mm Z-axis 150 mm Stroke of the units X axis 3120 mm Y axis 1685 mm Z axis 250 mm Movement of the axes  Maximum vectorial speed in rapid traverse XY axis 35 m/min Stroke of Z axis 250 mm Panel pass 150 mm Hiteco milling unit Motor power 5.5 kW (7.5 HP) Tool holder HSK-63-F Milling spindle speed 1500-24000 rpm Tool changer 8 positions Central exhaust connection 250 mm Control unit Windows EmbeddedStandard 7 64 bit  21.5 LCD touch screen XILOG-MAESTRO software package  Including vacuum pump Capacity 250 m3/h Power 5.5 kW Max. vacuum 0.9 bar Noise level 81 db (A) Total dimensions 5000x3000x2500 (LxWxH) Total weight 2500 KG - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AM00002846 - Transport dimensions: 5000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, machine/vehicle number: 008175, X axis working area: 3100 mm Y axis working area: 1300 mm Working Table: Pod and Rail Gedpfxex A Tb Rj Ah Douk Main Electrospindle power: 8.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 17 Total number of tool changer positions: 18

Condition: used, Year of construction: 2011, · Working area: 2,550 x 1,067 mm · X-Y travel: 2,980 x 1,450 mm · Z-axis travel length: 150 mm · Clearance height: 120 mm Drilling Unit F14: · Drilling head with 8 + 6 spindles · 5 individually selectable vertical spindles in X · 3 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm available as an option) · Power: 2.2 kW · Grid: 32 mm · Drill holder: M10 with 11 mm positive fit · Pneumatic feed stroke: 60 mm Grooving saw unit in "X": · Integrated in the drilling head · Grooving saw blade with a maximum diameter of 120 mm Main milling unit: · Tool interface HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power: 7.5 kW (10 HP) from 12,000 rpm (S6) · Right-/left-hand rotation · Ceramic bearings · Prepared for use with angle drives Tool changer TR10: Automatic lateral tool changer for 10 tools. · Number of tool positions: 10 · Maximum tool diameter: 120 mm · Maximum weight per tool: 4.5 kg · Maximum total tool weight: 28 kg A central extraction port collects all processing units into a single connection with D=200 mm. This reduces the required extraction capacity to approx. 3,200 m³/h. TVF worktable: The worktable is designed to provide the operator with maximum "freedom of movement." The vacuum quick-clamping system offers maximum flexibility for precise positioning and optimal holding of workpieces. · 4 TVF supports, L=1100 mm, infinitely adjustable in X · 12 TVF vacuum cups 120 x 120 mm, infinitely adjustable in Y · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total 4 pcs.) · Retractable reference stops controlled via CNC Guedjxy Ndiopfx Ah Dok Automatic central lubrication: The correct amount of lubricating grease is distributed via an electronic CNC control unit (X, Y, Z axes) Vacuum system (base machine): · Vacuum pump: 90 m³/h · Power: 2.2 kW · Max. negative pressure (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - Import of DXF files - Import of ASCII files - User interface in operator’s native language Safety devices with bumpers Machine technical data: · Total connected load max.: 18 kW · Recommended fuse: 64 A · Power supply: 400 V 50-60 Hz · Compressed air: 6-7 bar · System pressure (recommended): 8 bar · Compressed air consumption: 200 Nl/min · Central extraction port Ø: 200 mm · Extraction speed: 30 m/sec · Air consumption (central extraction): 3,200 m³/h · Negative pressure: 3,000 Pascal · Weight: approx. 2,500 kg Remote control of machine functions 6 TVF supports L=1,100 mm and 18 vacuum cups 120x120 mm Cross lasers for vacuum cup positioning Two cross lasers mounted on the unit carrier allow for easy positioning of the vacuum cups. Location: Nattheim

Condition: used, Year of construction: 2001, Empty weight: 5.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AL/6222 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 18 - └ Vertical drilling spindles [pcs.]: 6 - Tool changer positions [pcs.]: 14 - Voltage [V]: 400 - Current consumption [A]: 32 - Power [kW]: 26.0 - Transport weight [kg]: 5000kg Financial information Guodpfx Ahoxbzg Eo Dok VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, machine/vehicle number: 008171, X axis working area: 4200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Godpfexaud Usx Ah Deuk Number of controlled axes: 4 axes Total number of drilling spindles: 35 Total number of tool changer positions: 18

Condition: used, Year of construction: 2012, CNC machining centre SCM Morbidelli M-600 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Gsdjwnhccopfx Ah Dsuk Working distance Y-axis 1680 mm Working distance Z-axis 250 mm Tool positions 36 Vertical drilling spindles 24  Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Including vacuum pump Capacity 250 m3/h Disassembled for transport Weight 7450kg - Year: 2012 - Documentation available: No - CE certificate present: No - Serial number: AA2/002032 - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 24 - Tool changer positions [pcs.]: 36 - System/software: SCM Maestro - Vacuum pump present: Yes - └ Capacity [m³/h]: 250 - Working range X [mm]: 5020 - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2014, Price: On request CNC Machining Center Biesse skill 12 24 G FT Year of construction 2014 Machine no. 60961 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 2465 mm Y-axis 1260 mm Z axis 324 mm Disassembled for transport on normal trailer; 4500x2200x2400mm; Own weight 2000kg - Year: 2014 - Documentation available: Yes - CE certificate present: No - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 10 Gedpownhansfx Ah Djuk - Tool changer positions [pcs.]: 12 - Working range X [mm]: 2465 - Working range Y [mm]: 1260 - Z-axis working range [mm]: 324 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets