Condition: used, Year of construction: 2000, Storage location: Nattheim Iedpovvi Ikefx Abceap

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Ijdpfx Abevvi Iqjceap

Condition: used, Year of construction: 2021, Exhibition unit (little used) Lubrication: Grease Max. output speed n2: 4,000 rpm Gear ratio (n1:n2): 1:0.8 Weight: approx. 8 kg Machine connection: HSK F63 Tool holder Usable width: 24 Iaedpfx Absvvi Iwecjp Storage location: Garbsen

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Iasdpfxsvvi Nbe Abcep Storage location: Nattheim

Condition: used, Year of construction: 2014, Speed: 1450 rpm Motor: 2.4 kW Suction capacity / Flow rate: 70 m³/h Suction pressure: 3 mbar Tank: Operating pressure: 0.99 bar Capacity / Liters: 90 Operating temperature: 50°C Year of manufacture: 1989 No. 400 100 Storage location: Supplier Iaodpfxsvvi Nns Abcsp

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Ijdpsvvi Nzofx Abcsap

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Ijdpfx Abjvvi N Iocoap

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Iodpfx Asvvi Rfobcsap

Condition: used, Year of construction: 1999, Storage location: Nattheim Iaodpfsvvi Rxox Abcep

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Storage location: Nattheim Isdjvvi R Espfx Abcsap

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Iasdpfx Abjvvi Scscjp

Condition: used, Year of construction: 1995, Storage location: Supplier Iajdpfx Abjvvi Sijcep

Condition: used, Storage location: Nattheim Iaodowkirqepfx Abcsp

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Ijdpfxovvi Sps Abcjap

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 1000058013, functionality: fully functional, operating hours: 1,225 h, Equipment: CE marking, documentation/manual, ENGLISH SPOKEN NOUS PARLONS FRANCAIS Iaedpfx Aboyu Nulocjp Manufacturer: BIESSE Model: BREMA EKO 2.2 Year of construction: 2022 Condition: very good Category ID: 2502 Type ID: 4257 Type: vertical wood machining center We offer this very good BIESSE BREMA EKO 2.2 vertical wood machining center, year of construction 2022. The machine was sold new in october 2022 together with a Biesse B-solid software for a total price of €120.000 excl. VAT. The machine only has 1225 working hours, it is sold with all the tools seen on the pictures, which make it a bargain ! Please keep in mind we sell the machine in "used" condition. We sell it as a user, therefore no warranty can be offered on the machine. We'll be happy to load it on a truck and even organize the shipment when required. If you have any questions or need more information, feel free to send us a message or give us a call. Notre entreprise de menuiserie vend cette très belle machine Biesse EKO 2.2 qui a peu servi 1225 heures de travail seulement La machine est très bien équipée et sera vendue avec le logiciel B-suite de Biesse, et tout l'outillage qui est présenté sur les photos. C'est une affaire à ne pas rater ! Prix neuf en octobre 2022 : 120.000€ HT La machine est vendue sans garantie car nous ne sommes pas revendeurs de machines-outils, nous sommes une entreprise de menuiserie. Nous pouvons organiser le transport et charger la machine sur un camion.

Condition: used, Year of construction: 2013, Alberti Vector B/CN is a vertical coordinate borer designed for precise drilling and machining of flat materials. The machine features continuous workpiece feed with automatic loading and positioning along the axis. Thanks to its monolithic steel construction and four-axis control, it offers high rigidity, stability, and accuracy even under demanding operating conditions. Optimized work cycles enable efficient drilling, milling, and handling of the workpiece. The combination of multiple spindles, independent vertical units, and the option to use a saw makes this machine a versatile solution for the furniture and woodworking industries. Technical Data Max. workpiece dimensions: 3200 × 1200 mm Min. workpiece dimensions: 300 × 130 mm Processable thickness: 10–60 mm Max. programmable speed (X/Y/Z): 100 / 45 / 12 m/min Axis positioning tolerance: ± 0.1 mm Iajdpfx Aboxgfg Tjcjp Spindle motors: 2 × 1.5 kW Spindle speed: 3800 rpm Independent vertical spindles: 30 units, 32 mm pitch Saw motor (Ø 125 mm): 1.33 kW Saw inverter: 7.5 kW – 1000 ÷ 18000 rpm Electrospindle motor: 6.7 kW Electrospindle speed: 9000 ÷ 18000 rpm Max. tool diameter: 60 mm Max. required power: 10 kW Operating pressure: 6–7 bar Air consumption: 100 Nl/min Exhaust air speed: 30 m/s Chip extraction capacity: 5000 m³/h Total machine weight: 3500 kg Central unit weight: 350 kg Dimensions (L × W × H): 5600 × 2110 × 2200 mm

Condition: new, Year of construction: 2021, machine/vehicle number: 218, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OSAI, total height: 8,100 mm, total length: 5,100 mm, total width: 3,400 mm, controller model: OPENkey, spindle motor power: 7,400 W, number of spindles: 4, rapid traverse Z-axis: 38 m/min, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 54 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: CE marking, documentation/manual, We've lowered the price!!! NEW PRICE ONLY EUR 130,000!!! This price is valid only until March 21, 2026! Take advantage of this opportunity! We invite you to purchase a NEW and exceptional 5-AXIS MACHINING CENTER from the renowned manufacturer FANUM. We are offering the new SIGMA model, which is exceptionally well-equipped. The machine is completely new, and the attached specification details all functions, parameters, and production capabilities. FANUM has been recognized for years for its reliability, accuracy, high performance, and fast processing speed. The MACHINING CENTER offered is BRAND NEW. It was purchased from FANUM Sp. z o.o. in 2021 and delivered to our facility directly by the manufacturer. The FANUM Sp. z o.o. service team only performed initial commissioning and the machine has not been used since. Its condition is as NEW. Our model is extremely well-equipped and offers practically everything required. A comparable new unit currently costs approximately EUR 282,350 net (PLN 1,200,000 net). We maintain direct contact with, and support from, the manufacturer, FANUM Sp. z o.o. An additional commissioning and demonstration can be arranged at our facility. It is also possible to organize transportation to the new owner’s location and to have FANUM's engineers install and start up the machine at the installation site. The proposed price includes the machine itself, but we can also provide an offer with installation and commissioning at the new location. With a discount exceeding 40% (over EUR 117,640 net, approx. PLN 500,000 net) off the new purchase price, this is an extremely attractive opportunity for anyone looking to expand their production fleet with a similar machine or who did not anticipate acquiring a modern, new, and highly efficient MACHINING CENTER within their planned budget. General terms of sale: • Although the machine is NEW, it was manufactured in 2021 and we do not offer any guarantee or warranty; Iedpfoyn Rpwsx Abcjap • Returns are not accepted; • The price shown does not include VAT (23% for buyers in Poland), which will be added to the invoice—please check the price in the listing; • Single ownership. * Price in EUR calculated based on NBP exchange rate: 1 EUR = 4.25 PLN. A warm welcome to all users of the MACHINESEEKER platform. We are new to MACHINESEEKER. We are not a furniture, manufacturing, or machinery dealer. We own numerous properties in Poland and are a developer of houses and apartments in Warsaw, the capital of Poland. The machines offered for sale are our property, acquired through settlements with tenants from the furniture industry. We are familiar with the machines’ history and condition, verified as per our descriptions. We are in direct contact with manufacturers who can provide additional support—Homag, Otto Martin, OMC Machinery, and FANUM. Since we do not require these machines, our prices are highly attractive, especially given their condition is virtually new. We can assist with transportation anywhere in Poland or the EU. Inspections before purchase are welcome. Best regards.

Condition: used, machine/vehicle number: 008372, X axis working area: 4140 mm Y axis working area: 1850 mm Iaedpsylixlofx Abcep Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Maximum edge height: 45 mm Total number of drilling spindles: 23 Total number of tool changer positions: 18

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, power: 23.5 kW (31.95 HP), travel distance X-axis: 3,850 mm, travel distance Y-axis: 2,015 mm, total length: 6,580 mm, total width: 4,560 mm, overall weight: 6,500 kg, for the production of furniture components made of wood or wood-based materials. Working area X 3250 Y 2025 Z 150 Alternate field processing Pendulum operation Chip conveyor 3250 mm, 1 x right, discharge right Ijdpfx Abeyufd Ascjap Chip conveyor integrated in the machine frame. Discharge direction: right HSK 63 lock case HIGH Performance, 1 x right, 2 spindles For automatic tool change in the main spindle. HSK63 milling unit, 4 spindles, cross-head Flex-5 saw, milling, and drilling unit for tool changer -for automatic tool change in the main spindle -for sawing, milling, or drilling operations

Condition: good (used), Year of construction: 2007, Working area approx. 3600 x 1500 mm X-axis speed: 70 m/min Y-axis speed: 60 m/min Z-axis speed: 15 m/min Electrospindle power: 8.5–13 kW Horizontal drilling spindles: 6–8 Pass-through height approx. 130 mm Z-axis stroke: 240 mm Installed power: 20–30 kW Weight approx. 3,500 kg Required space approx. 7,400 x 3,500 mm Iasdpfxjyt H Imj Abcsp Drilling unit: 12 adjustable spindles plus 4 + 2 horizontal spindles Saw Vertical milling unit Interpolating vector axis Horizontal milling unit "TVN" table with six supports, L = 1,500 mm Laser system for suction positions Interpolating vector axis Vacuum pump NC control system with PC-Office Drill speed adjustable via inverter Exact configuration upon request Details subject to change Price ex works. Assistance with dismantling is possible. (Sale on behalf of customer)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, operating hours: 300 h, input voltage: 400 V, number of axes: 3, number of slots in tool magazine: 12, table length: 3,100 mm, table width: 2,100 mm, year of last overhaul: 2019, Equipment: CE marking, cabin, IMasterwood 21.31 KS nesting cnc machine, manufactured in 2019, commissioned in 2020, in perfect condition, 1200 working hours. Drilling unit. XYZ dimensions (mm) 3100-2150-100. Tool magazine - maximum quantity of tools 12. The machine is configured with an automatic system with loading and unloading suction cups to be able to operate with the loading and unloading table. 4 vacuum zones. Iodpfsylvmcjx Abcsap The machine is in operation in Brașov, it can be tested.

Condition: used, Year of construction: 2006, Masterwood Projekt 415L 4-axis routing and drilling machine Working area 5150 x 1335 mm Year 2006 Iodoyuuklepfx Abcsap Fully operational Available from early April 8 supports Horizontal router for door production Drilling head 18 HP liquid-cooled electrospindle Toolchanger HSK 63-F, 12 positions Second toolchanger, 2 positions 8 supports Pre-arranged for clamps Vacuum cups 100m³ vacuum pump Remote control Price on request

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, SPM2 - 2600 - 2600 Can be inspected during operation. Training possible on request Iodpeu H Uqcsfx Abcoap - Automatic panel infeed - Lifting table 2600 x 6000 Aggregates - SPM-FF6-23U Finger router 6 Kw max. 23170 rpm - SPM-KSK3 4-axis circular saw unit 3 kW saw blade 220mm - SPM-5F 5-axis milling unit 6.0 kW (special motor 24,000 rpm - 5-axis unit) - SPM-IJ Ink marking system - InkJet HP system Component delivery - SPM-SHP-6000 Special lifting table Panel removal 2600 x 6000 - Access guarding of discharge area

Condition: as good as new (ex-display), functionality: fully functional, The Format4 creator 950 in a wide range of equipment variants - your CNC machine for individual woodworking challenges. Iajdpfx Abju Eg A Uscsp Efficient CNC processing at a fair price - this principle is at the heart of the creator machine series. All models are attractively equipped with the latest CNC technology and can be customized to meet specific requirements. The creator 950 is not only an easy and safe entry into the CNC world, but also serves to relieve your CNC machining centers. Your advantages at a glance: Concentrated CNC technology on a footprint of just 5 m² All-inclusive: 4-sided formatting as standard Get started right away: Maximum productivity without set-up times No suction cup and console positioning Use from interior fittings to room doors Traditional processing from above - extremely simple loading Intuitive control via control panel Easy to understand software Best suction result High-end at the best price in every configuration Carcass processing with Lamello Clamex-P Additional equipment: C19 2nd stop reference cylinder for long workpieces C71 Folding support tables front+rear - roller table C198 Pick-up space for tool and unit change C200 4-fold linear changer for use of units C233 Holder for crane transport C490 F4design (incl. 3-axis PP) 800 E-Learning F4Design Creator processing field: Travel of the axis X= 1475mm (bracket) Y=1550mm Z= 225 mm Working field X= 3500 mm (infinite) or 130 kg maximum load Y= 950 mm Z= 80 mm Machinable workpiece Equipped with: High-performance PC 24" LED color display Keyboard, mouse and mouse pad 1 USB interface

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 35 Total number of tool changer positions: 26 Iajdsx A Hbkopfx Abcep