Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, workpiece length (max.): 2,800 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 60 mm, controller model: CNI N-Conex, spindle speed (max.): 24,000 rpm, The submission of a bid obligates the successful bidder to collect the item by 15.06.2026 at the latest! TECHNICAL DETAILS Maximum workpiece length: 2,800 mm Maximum workpiece width: 2,100 mm Maximum workpiece height: 60 mm Cjdey Sadaopfx Aizjri Travel range X-axis: 2,800 mm Travel range Y-axis: 2,100 mm Travel range Z-axis: 250 mm Feed rate X-axis: 80 m/min Feed rate Y-axis: 80 m/min Feed rate Z-axis: 30 m/min Spindle motor power: 9,000 W Number of spindles: 10 Maximum spindle speed: 24,000 rpm Number of tool magazine positions: 12 MACHINE DETAILS Control system: CNI N-Conex Dimensions (L x W x H): 11,500 x 3,700 x 2,400 mm Vacuum pump: Becker 250 m³/h, 8 zones EQUIPMENT Automatic tool measurement Automatic lubrication system (Dropsa) Automatic labeling (barcode system) Lift & loading system Unloading system with conveyor belt Pressure rollers for multiple panel processing

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 0-250-23-0021, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, feed rate X-axis: 138 m/min, feed rate Y-axis: 80 m/min, Submission of a bid obligates timely collection by 15.06.2026! TECHNICAL DETAILS X-axis speed: 138 m/min Y-axis speed: 80 m/min Codpfxoy Sad Hs Aizori Z-axis speed: 50 m/min Workpiece length: 300–2,500 mm Workpiece width: 100–1,000 mm Workpiece height: 4–80 mm MACHINE DETAILS Control system: power control PC 85 T Dimensions (L x W x H): 6,500 × 2,300 × 2,700 mm Electrics: 3 × 415 V / 50 Hz Power consumption: 19.5 kW Fuse: 50 A Pneumatics: min. 7 bar Air consumption: 2,500 NL/min Extraction connection: 2 × 280 mm Extraction capacity: min. 4,450 m³/h

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Safety enclosure on the working head - Side safety metal grids - Front emergency carpets The following technical data are ESTIMATED and are not BINDING: Numerical Control with Software Biesse Works - Workpieces dimensions (workable panels): - Length: mm 90 - 3000 x Width: mm 70 - 1000 x Thickness: mm 8-60 (for longer panels than mm 2000, minimum thickness is mm 13) - No. 2 Grippers to keep fix the workpieces during process and 1 in-feed table (with air-blowing) Crjdszy Ngwjpfx Aizei - No. 1 Out-feed table, with motorized conveyoring belts BOTTOM WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe) TOP WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe)

Condition: used, Year of construction: 2008, 3650 x 1560mm Matrix Table 4455mm x axis stroke [for routing] 1930mm y axis stroke [for routing] 250mm z axis stroke 150mm Max panel clearance X / Y Axes vectorial speeds 43m/min Z axis speed 15m/min Power 2000 Routing Unit 9 / 10hp for HSK63F toolholders. Speeds from 12000 to 18000rpm 250m3 / hr vacuum pump Cjdpjzd Utwefx Aizori Telesolve long distance remote diagnostic system Fitted with following options Interpolating Z axis Centralised dust extraction system Pre-setting for angle driven heads TR10 Fixed 10 position toolchanger [ mounted on side of table ] R8 Rapid 8 position rotary toolchanger [ mounted on operating unit support beam ] 2 x Electronic detecting systems for panel height and tool length 3 x Additional rear stops Automatic centralised lubrication "PC Office" Console for easy movement around machine. Including Windows XP operating system 15" Colour monitor Keyboard CD Rom drive 40 Gbyte hard disk 128MB Ram Serial nr - AA2 / 000268? Year - 2008 CE Compliant Condition - Good

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 132, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,100 mm, number of axes: 5, Equipment: CE marking, SECOND-HAND 5-AXIS CNC WORKING CENTER BACCI MOD. TWIN - Strokes: X = 3400 Y = 1500 Z = 1100 B = endless C = 400° - Type 4 head 7.5 kw - 0-24.000 rpm - N. 2 tgv working tables - OSAI control - Enclosed cabin on 4 sides + roof - No. 2 Becker vacuum pumps 100 m³/h - Serial no. 132 Codpszclg Hjfx Aizori - Year 2001 (CE rules)

Condition: used, Year of construction: 2007, - Working area: X = 4600 mm / Y = 1935 mm / Z = 275 mm - CE safety devices - 8 ATS plate holders - L = 1525 mm - 24 sliding rails - Automatic positioning of 8 plate holders and sliding rails (EPS X-Y) - Conveyor belt for removing chips and scrap - Pneumatic locking system, divided into 2 working areas in X - 8 rear reference stops with a stroke of 115 mm - 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm) - 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm) - 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - Sensor for detecting lowered stops. - Pneumatic system for lifting rod holders. - 6 lifting rod holders for easy loading - H = 74 mm modules. - Vacuum system for a 250 m3/h pump Crodpfx Ajzux Nwsizsi - 250 m3/h rotary vane vacuum pump for standard vacuum system Composition C3-A1 - Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit. - Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position. Composition C3-P2 - Additional Z-slide for rear work units, controlled by an independent Z-axis - 16 vertical and 4 horizontal drilling spindles in the Y direction - Chain-type tool changer with 22 positions at 180 mm center distance - Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer - RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle - Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head. - Automatic lubrication system - Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions. Note: - Additional overhauled 5-axis main spindle - 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge Cjdpezux Tpefx Aizsri The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes Crjdszuygqepfx Aizei • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: used, optional equipment: Machine table in 2 support systems – left table half with TVN supports, right table half with ALU table and its own vacuum circuit. Travel ranges: X = 4400 mm, Y = 1720 mm, Z = 400 mm Tool holder HSK 63 F Motor 7.5 kW, 900 - 20,000 rpm Inverter 18 kW for spindle unit – increased power output up to 11 kW Tool changer RAPID 24 = 24 tool positions Drilling unit with 18 spindles Credpfxszxzgmj Aizei Equipment for door processing (H = 110 mm) - for processing left and right doors - with 4 pneumatic positioning aids, each with a capacity of 20 kg - 6 reference stops with veneer overhang Laser positioning for TV system Central extraction connection above the CNC unit Vacuum pump 250 m³ Control system/control cabinet: - NUM Series 1000 with Office PC - XILOG-PLUS - Cable remote control - Analog modem with software for teleservice Swinging machining standard for 2 work areas LED display / suction cup positioning Motorized chip conveyor 3-part floor mat / front Large accessory package with vacuum suction cups, stops, etc. Machine from a carpentry business closure due to retirement Machine is still in operation and in very good condition available at location

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Working range X: 3855 mm Working range Y: 2650 mm Working range Z: 200 mm 5-axis electrospindle Vertical drilling heads: 29 Horizontal drilling heads X: 6 Horizontal drilling heads Y: 4 Saw blade for grooving in the X direction 33-position chain tool changer Worktable with 6 supports 250 m3/h vacuum pump (2023) Software: BiesseWorks and NC-Hops Direkt installed Chip conveyor belt Safety mats Protective netting Approximate weight: 6300 kg Cjdpez Atb Rsfx Aizeri Only 2572 hours on the 5-axis spindle and 1488 hours on the drilling unit Available at the end of November 2026

Year of construction: 2010, condition: like new (used), I sell the radius copy milling aggregate for edges suitable for CNC working centres with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12.000 rpm. Radius R2mm. HSK63 holder. Codehw Db Iopfx Aizeri Available immediately.

Condition: excellent (used), Year of construction: 2006, I sell the double side throughfeed CNC working centre Biesse Skipper 100 Year 2006. Crjdpfxshlhigo Aizji Very productive and fast. Automatic infeed table. Working length 90-3000mm Working width 70-1000mm Working height 8-60mm Configuration per side: Milling head 3,5 kW, 7000-18000 rpm 29+8+2 Drilling heads 1 Grooving saw D.150mm X-direction Software BiesseWorks. CD included. Condition very good ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included. Repairs required: 1 safety carpet

Year of construction: 1994, condition: used, - More information: on request Cedpfjnzh Uxjx Aizjri

Condition: new, Year of construction: 2026, THE MACHINE HAS A TOOL STORAGE EQUIPPED WITH 6 ISO30 CONES !!! CNC 2030 ATC CNC Router is a precise machine constructed in Poland, it is used to process many engineering materials, i.e. wood, wood-based materials (chipboard, MDF, OSB etc.), plastics (plexiglass, PVC, HPL etc.), composites (dibond, carbon, alucobond), soft metals, etc. The ATC series machines have an additionally reinforced structure and the applied AC servo drives on each axis, coupled with an affordable price, leave the competition far behind. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. Credpfx Aijin Ek Djzei CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: good (used), Year of construction: 2001, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2001. Configuration: Crodpfx Aisi U Dxuezsi 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: good (used), Year of construction: 2000, The lock case unit has a cutter holder for the faceplate on one side and a holder for the lock case cutter on the other side. € 800 Then we have a corner notching unit that produces the best results for sharp corners. We are selling the unit with the tool here. It was used very little. € 800 We also have some very good diametrical cutters... Csdovvr R Ijpfx Aizeri And 2 planing heads from Weinig for a 4-side planer 130 x 125 mm € 300 per head

Condition: new, The Holzprofi CNC machine offers working dimensions of 900x600x200mm, a solid cast iron frame and a mechanically welded sheet metal frame. This CNC machine allows you to cut, shape and engrave various materials as well as produce intricate designs and patterns precisely and efficiently. CE compliant, depth probe included. Advantages and features: -Large work surface for many applications, even for larger workpieces - Compatible with many drawing programs thanks to G-Code integration - Made from special steel, it ensures maximum strength and longevity and is suitable for use in all weather conditions - DSP control box guarantees efficient and safe operation - High durability thanks to solid design with cast table and mechanically welded sheet metal frame Technical data: Working dimensions (L x W x H): 900x600x200mm Cast iron frame: 1230x730x100mm Working height without legs: 750mm Motor: 2.2kW/3CV/230V spindle driven by frequency converter Stepper Motor: Nema 34 stepper motors for X, Y, Z and A axes Drive: The X, Y and Z axes are driven by 2505 ball screws Control: DSP type control box A-axis mandrel Ø: 100mm A-axis distance: 800mm Guide rail: 20x20mm ground stainless guide rail for ball supports Clamping option: ER20 clamp with Ø3, 6 and 12.7mm socket Base area: 1400x1180x1600mm Packaging dimensions: 1550x1235x1590mm Weight: 320kg Csdjvrv Ayopfx Aizeri

Condition: new, Year of construction: 2026, functionality: fully functional, Pros: • comprehensive processing (cutting, drilling, milling, engraving) • stable structure guaranteeing maximum precision and reliability • table with a vacuum system • free access to the machine enabling operation by one operator • the possibility of placing the entire palette of plates on the tray CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 150 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist Csdpsur N A Nofx Aizsri - any size of the working table

Condition: new, Year of construction: 2026, functionality: fully functional, The CO2 laser plotter is designed for cutting and engraving a wide range of materials, such as Plexiglas, leather, rubber, wood, plywood, paper, cork, textiles and a variety of engraving laminates. It is a versatile and extremely useful device in the production processes of many industries. Cedour Sv Eopfx Aizori The CO2 1490 laser is perfect for both prototyping, small-scale production and personalization. The laser technology provides high precision cutting and engraving, as well as speed and accuracy in making complex designs and details. - Tube power: 100 [W], - Table type: knife + honeycomb, - Cooling: water-based, - Machine power: 1000 [W], - Weight: approx. 300 [kg], - Power supply: 230 V±10%/50-60Hz, - Interface: USB, - Work surface: 1400 x 900 [mm], - Positioning accuracy: ±0.01mm, - Engraving speed: 1-800 [mm/s], - Feed system: stepper motors (servo option), - Positioning system: red dot (laser), - Cutting speed: 1-600 [mm/s]. The plotter comes with modern software to operate the machine, which allows it to work with programs such as Corel Draw, AutoCAD.

Condition: good (used), Production line consisting of: - BACCI FC 8 Crodpet Tw S Usfx Aizji - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 2700mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Max working height: 180mm Cedet Txfpjpfx Aizeri Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: excellent (used), Year of construction: 2003, Year of manufacture: 2003 Crjdpfx Aijtr A Evezsi Voltage: 400 V Frequency: 50 Hz Weight: 3200 kg Number of axles: 3

Condition: like new (used), Year of construction: 2009, CNC Saom MODEL ML 250 Cjdpfst I U T Sox Aizeri

Condition: used, Year of construction: 2008, machine/vehicle number: 97457, functionality: fully functional, input voltage: 380 V, input current: 52 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 1,550 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, number of slots in tool magazine: 120, actuation type: electric, total height: 2,600 mm, total length: 6,500 mm, total width: 7,500 mm, overall weight: 12,000 kg, Equipment: CE marking, documentation/manual, FTT Insider R8 drilling center with transverse feed, equipped with 4 upper tool heads. Each head features: a) two sets of vertical drills with a 32mm spacing: 18 spindles in the Y-axis, 14 spindles in the X-axis, and an additional 4 horizontal spindles in the Y-axis. b) an electric spindle unit with a power of 3.8 kW and an ISO30 chuck. The machine also has two horizontal drilling units, each consisting of two units equipped with 18 spindles with a 32mm spacing. The machine is equipped with two chain-type tool magazines for vertical drills: 60 positions each. Cjdpfx Aiozypnbezori Belt conveyors at the inlet and outlet allow for manual loading of parts; it is also possible to operate the machine in a production line.

Condition: used, functionality: fully functional, Alberti Format 90 CNC machining centre for sale! Technical specification Working area 3000 x 1250 mm Max. panel thickness 50 mm Max. programmable speed axis X 40m/min, axis Y 40 m/min, axis Z 9m/min Spindles motor power n.2-2 HP - 3000 rpm 27 vertical independent spindles on 32 mm centers Possibility to mount 4 router with cono morse Crodpfx Ajx Ey Sdsizji Router speed and power outpust 18000 rpm Possibility to mount 1 saw Saw speed and power output 12000 rpm Operating pressure 6 bar Total weight 4450 kg Dimensions incl. electr. cabinet 5800 x 3450 x 1950 mm