Used CNC turning and milling centers for sale (611)

Condition: used, Year of construction: 2004, Nakamura WT 250 MMY Turning - Milling Center, year of manufacture 2004, Fanuc 18i TB control, turning length 555 mm, turning diameter 250 mm, bar machining up to 65 mm, 2 turrets (2 x 24 positions / 12 driven each), driven tools on both turrets, Y-axis upper turret +/- 41 mm, C-axis main spindle, CF-axis sub-spindle, increased drive power main spindle, loading magazine LNS Hydrobar Sprint S2 / 3M, high-pressure coolant, automatic power-off, filtration unit 700 liters, prepared for oil mist filter, chip conveyor, parts catcher tray, NT tool setting device, loading/unloading system, no workpiece handling. Fgodoxhb T Eepfx Aabeh

Condition: good (used), Year of construction: 1996, overall weight: 9,960 kg, JENZ AZ 35 D/Electrical Issue/Shredder/Chipper Fodpfxoxb Dkye Aabjgh • Manufacturer: Jenz • Model: AZ 35 D • Year of manufacture: 1996 • Total weight: 9960 kg • Engine: Mercedes-Benz 6-cylinder • Electrical issue • Rotor and beaters in good condition • Discharge conveyor as new • Power: kW/HP • Documentation • German machine • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes reserved. - Sale according to our terms and conditions.

Condition: used, DOOSAN S390L CNC LATHE MAKE DOOSAN, MADE IN KOREA MODEL S 390L, YEAR 2000 CONTROL FANUC 21T SWING OVER BED 580 mm MAX TURNING DIA 390 mm DISTANCE BETWEEN CENTRES 800 mm CHUCK DIA 300 mm SPINDLE BORE 89 mm SPINDLE NOSE A1-8 SPINDLE SPEED 3500 RPM SPINDLE MOTOR 30 HP TURRET 12 STATIONS, RAPIDS X: 24m/min Z: 30m/min TAILSTOCK YES MACHINE DIMS L: 2800 mm W: 1880 mm H: 1800 mm MACHINE WEIGHT 5000 KGS PLUS Fgsdpfxjxfa Ipe Aabeh TOOL SETTING PROBE COOLANT SYSTEM TURRET TOOLING

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand MAZATROL Movement X-Axis Movement 615 Y-Axis Movement 260 Z-Axis Movement 1585 W-Axis Movement 1574 Additional Equipment Overload detection system / M-coolant (equipped) prep M-thru 7MPa / Mazak Monitoring System B (RMP600) / Mazacheck / C-axis through milling head during rotation / M-code to be switched coolant/air thru / Ethernet operation function / B) Cylindrical & Polar Coordinate (EIA) / 5-Axis Machining Package for SmoothX / Signal Tower (3 colors lights, square) / 2nd Spdl C-Ax. Sync (fact. install only) / Raw/tube connection parts til 1 & 2nd spindle / Mayfran, Consep2000 side / Mayfran, Variflow HP Pack #1 (7 variable flow/pressure stages), 7.5 K/ Mayfran, HP Twin in-line cartridge filter upgrade / Mayfran, coolant gun This 5-axis Mazak Integrex i-400S was manufactured in 2017, featuring a 1500 mm bed, 72 Capto-tool magazine, and a Mazak Monitoring System B. It includes a 5-axis machining package for SmoothX and Ethernet operation functionality. If you are looking to get high-quality turn-mill capabilities, consider the Mazak Integrex i-400S machine we have for sale. Contact us for more information. Fodpfx Aoxbupteabogh Application Types Turning

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, A machine video from the production plant will be shared on request. Fgedpfoxcbktsx Aaboh The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Travels X-axis: 598 mm Y-axis: 230 mm Z-axis: 1,660 mm Main spindle Speed range – main spindle: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis: 0.001° Feeds Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 min⁻¹ Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) Driven stations: infinitely variable Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Fodsxb Awfopfx Aabegh Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Control: OSP 7000 L Space requirements & Weight Approx. footprint: 6.0 x 3.2 x 3.0 m Approx. machine weight: 18.5 t Electrical data Total connected load: 53 kVA Rated voltage: 400 V Number of phases: 3 P Frequency: 50 Hz EQUIPMENT Chip conveyor Central coolant system High-pressure coolant Signal lamp Hydraulic unit Steady rest Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel 44 assorted tool holders

Condition: excellent (used), Year of construction: 2017, operating hours: 20,000 h, functionality: fully functional, spindle speed (max.): 6,500 rpm, bar passage: 42 mm, bar diameter (max.): 42 mm, Production lathe Gildemeister Sprint 42 - 8 linear axes with high-pressure system and Iemca bar feeder Year of manufacture: 2017 Control: Fanuc 31i Operating hours: ~20,000h Version with 8 axes – linear drive on X1 axis Main and counter spindle speed: 6,500 rpm Max. bar capacity: 42mm Fgedpfx Aaexbpp Ujbsh Coolant system: Slide 1: 8 bar Slide 2 + Y: 20 bar Bar feeder: Iemca BOSS 552/32 Parts conveyor belt

Condition: used, Year of construction: 2002, Technical details: turning diameter: 370 mm turning length: 200 mm Spindle 1 RPM: 4000 1/min control: Siemens 840 D Spindle 2 RPM: 4000 1/min power capacity: L / R 18/24 kW max. torque on the spindle: 630 nM C-Axis: 0,001° Turret No.1 stations / rotary tools: 12/12 VDI 40 Turret No.2 stations / rotary tools: 12/12 VDI 40 turning speed range - milling: 3000 1/min power capacity - milling spindle: 8,8 kW torque rotary tools: 28 Nm Bar capacity spindle 1: 85 mm total power requirement: 65 kVA weight of the machine ca.: 13 t dimensions of the machine ca.: 5,7x2,4x2,1 m Travel x1: 260 mm Travel x2: 260 mm Travel Y1: 600 mm Travel y2: 600 mm Accerories Chip conveyor ls Parts and total counter Automatic separation wall Standard set of tool holders Power Chuck 2 x 250 mm manual tool eye l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools. * Fgjdsxlrkcopfx Aabjh

Condition: used, Year of construction: 2022, operating hours: 450 h, CNC Turning and Milling Center, used Well-maintained, lightly used machine. On September 15, 2025, OKUMA Germany carried out a geometry inspection and confirmed the machine's "generally very good condition." Manufacturer: OKUMA Model: MULTUS B250II – C – 750 Year of manufacture: 2022 Control: OSP-P300SA incl. OSP Suite Operating hours (as of May 22, 2025): Spindle hours total: 441 h Total power-on hours: 3,144 h Working area: Turning length: 750 mm Z-axis travel: 800 mm X-axis travel: 500 mm Y-axis travel: 200 mm (+/- 100 mm) C-axis: 360,000° B-axis: 225° W-axis (tailstock): 810 mm Tool spindle: 360,000° Main spindle: Fgedowydv Aopfx Aabjh Max. speed: 5,000 rpm Power: 22 kW Milling spindle: Max. speed: 12,000 rpm Power: 12 kW Taper: HSK-A63 Equipment: - 40-position tool changer - 3-jaw Kitagawa chuck - IKZ high-pressure coolant system - Electronic handwheel - Right-side chip conveyor - Thread milling with helical interpolation + eccentric milling - Control extension for conversational programming + circular arc thread cutting INCLUDES approx. 40 x HSK-A63 tool holders (without cutting tools) This is a well-maintained, serviced machine from a reputable company. The machine has already been professionally dismantled (September 22, 2025) and is therefore offered free-loaded (ex works).

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand FANUC Fsdpfx Ajxa Iaveabogh Model 18i MB5 Movement X-Axis Movement 800 Y-Axis Movement 500 Z-Axis Movement 550 Additional Equipment Approx. 20 tool holders included Bar loader short Knoll paper belt chip conveyor HL450/900 This 5-axis CHIRON Mill 800 was manufactured in 2007, featuring a swivel head, bar loader, internal cooling, and a Knoll paper belt chip conveyor. Equipped with a Fanuc 310i-model A5 and HSK-a-63, it includes about 20 tool holders. Consider the opportunity to buy this CHIRON Mill 800 turn-mill centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2006, greates pass round over bed 960 mm swing diameter over bed slide o: 860 / u: 730 mm turning diameter over bed slide o: 860 / u: 400 Fgedexcbkmopfx Aabeh control SIEMENS - 840 D forward bearing diameter 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 158015, turning length: 550 mm, turning diameter: 300 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 575 mm, TECHNICAL DETAILS Turning Diameter: max. 300 mm Turning Length: max. approx. 550 mm Standard Turning Diameter: 276 mm Swing Diameter: max. 525 mm Distance Spindle Nose – Turret Face: 115 – 690 mm Travel X-Axis: 190 mm Z-Axis: 575 mm Counter Spindle Travel B: 585 mm C-Axis: 360° Main Spindle Speed Range: 35 – 4,000 rpm Drive Power: 22 kW Max. Torque: 351 Nm Spindle Nose: A2-6" Spindle Bore: 76 mm Max. Bar Capacity: 64 mm Chuck Diameter: max. 250 mm Counter Spindle Fjdpfsxb Aizjx Aabegh Speed Range: 35 – 4,000 rpm Drive Power: 7.5 kW Max. Torque: 57 Nm Chuck Diameter: max. 150 mm Tool Turret Number of Tool Positions: 12 Tool Holder: VDI 40 Shank Diameter: 25 mm Drill Shank Diameter: 40 mm Turret Indexing Time: 0.2 / 0.6 s Driven Tools Speed Range: 25 – 4,500 rpm Drive Power: 3.7 kW Max. Torque: 35 Nm Feeds Rapid Traverse X/Z: 30 m/min Rapid Traverse C: 400 rpm Rapid Traverse B: 18 m/min Feed Range X/Z: 0 – 5,000 mm/min Feed Range C: 1 – 2,000 °/min MACHINE DETAILS Control: PC Fusion CNC 640 T Space Requirements & Weight Footprint: approx. 5.0 x 3.0 x 2.5 m Machine Weight: approx. 5.9 t Total Power Requirement: 34 kVA EQUIPMENT Documentation Chip Conveyor Coolant System Three-jaw Chucks 250 / 150 mm Tool Measuring Arm Driven Tool Attachment Extraction System 5x Fixed Tool Holders 2x Driven Tool Holders

Condition: used, Year of construction: 2008, Technical details: x-travel: 2665 mm y-travel: 2440-2890 mm z-travel: 750 mm max. torque on the spindle: 4400 Nm control: Siemens 840D workpiece diameter - max.: 800 mm workpiece length - max.: 750 mm tool changer with: Scheiben-Revolver 12-fach places spindle speed:: 750 U/min tool taper: 50 voltage: 400 V Total power requirement: 92 kW Weight approx.: 30 t dimension machine xH: 7,0 x 3,1 x 4,5 m The machine has a turret with 12 tool stations (VDI 50) and a milling spindle with a tool changer for up to 96 tools. Fgsdpow S Htaofx Aabsh The tool magazine can be loaded during machining, which reduces setup time and allows the use of “sister” tools. The proven EMAG turret is available for turning operations on the machine. The VLC 800 MT multifunctional machining center can completely machine parts up to 800 mm in diameter in a single clamping. If necessary, a new (unused) spindle unit can be purchased as an option. (#1100673) *

Condition: used, Year of construction: 2003, Technical details: turning diameter: 120 mm turning length: 100 mm control: Fanuc Spindle 1 power: 7,5 kW Spindle 1 RPM: 4500 1/min Spindle 2 power: 7,5 kW Spindle 2 RPM: 4500 1/min Distance between spindle noses: 600 mm Fodexlrf Tepfx Aabogh Turret No.1 stations / rotary tools: 15/15 Power rotary tools turret 1: 2,7 kW RPM of rotary tools turret 1: 4000 1/min Turret No.2 stations / rotary tools: 15/15 Power rotary tools turret 2: 2,7 kW RPM of rotary tools turret 2: 4000 1/min Travel x/z turret 1: 250 / 300 mm Travel x/z turret 2: 250 / 920 mm Bar capacity spindle 1: 51 mm Bar capacity spindle 2: 51 mm power chuck: 165 mm Spindle bore sp. 1: 62 mm Spindle bore sp. 2: 62 mm dimensions of the machine ca.: 3700 x 2300 x 3000 mm weight of the machine ca.: 5600 kg Used CNC-2-spindle CNC turning and milling center with gantry loader - 2x 15 station turret -automatic gantry loader with turnaround station. 14 station-magazin right side Max. Parts size Ø 120 x 100 mm Doublegripper capacity 2 x 3 kg *

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS: - CNC Control: MSX 803III - X axis travel: 260 mm - Z axis travel: 590 mm - Y axis travel: +/- 50 mm - Maximum turning diameter: 356 mm - C axis indexing increment: 0.001° - Maximum turning length: [specify mm] - Cutting feed rate X, Z, Y: [specify mm/min] - Swing over bed: [specify Ø mm] - Swing over cross slide: [specify Ø mm] - Bar capacity: Ø 65 mm (main) / Ø [specify] mm (sub) - Maximum rapid traverse X, Z: [specify m/min] - Main spindle: L-SPINDLE 12” - Main spindle speed: 5,000 rpm - Main spindle power: 18.5 kW - Main spindle torque: [specify Nm] - Main spindle bore: [specify mm] - Main spindle nose: A2-6 - Sub spindle: - Sub spindle speed: 6,000 rpm - Sub spindle power: 11 kW - Sub spindle torque: [specify Nm] - Sub spindle bore: [specify mm] - Sub spindle nose: A2-5 - Upper turret tool positions: 12 - Number of driven tool stations (per turret): 12 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW EQUIPMENT: - Chip conveyor - 3-color status lamp - Fixed tool holders - Parts extractor MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm Fsdowdrfgjpfx Aabegh - Weight: 5,800 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 13,536 h, Control Unit Brand MAZATROL Fgedpfx Aexb E Nqeaboh This 5-axis Mazak Integrex 400-IV ST was manufactured in 2007, featuring dual 10-inch chucks and Mazatrol Matrix control. It offers X1 and X2 cross travels of 630 mm, Z1 and Z2 longitudinal travels of 1,585 mm and 1,546 mm respectively, and a Y-axis travel of 230 mm. The milling spindle operates at 12,000 rpm, and the turning spindle at 2,800 rpm. Consider the opportunity to buy this Mazak Integrex 400-IV ST turn-mill centre. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2019, swing over bed 580 mm max. swing over facing slide 470 mm Distance between centres 1.085 mm control OSP-P 300LA max. turning dia. 340 mm Spindle speed 45 - 5.000 min -1 driven tools turning speeds 45 - 6.000 U/min CNC Turning- and Milling Center | OKUMA - LB3000II-MYW800 equipped with main/counter spindle, c- + y- axis, 12-way turret for driven tools and measuring probe The machine has only approx. 2.500 H spindle hours. Equipment: - Main spindle: Collet chuck Hainbuch BZI 65, hollow cylinder Ø77, 22 kW, 45–5,000 rpm - Counter spindle: 3-jaw chuck SMW KNC-N 170-43 Z140, solid cylinder, 11 kW, 50–6,000 rpm - Coolant system: Hommel flat belt filter, 980 l tank, system pressure 8 bar Fsdpjxb Ef Eofx Aabsgh The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on request. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: LB 3000 II | LB-3000 II | LB EX 3000 II - MYW800

Condition: excellent (used), Year of construction: 2015, operating hours: 17,500 h, functionality: fully functional, machine/vehicle number: MA201301, feed length Y-axis: 112 mm, bar diameter (max.): 80 mm, overall weight: 15,000 kg, three turrets - threeY axis - 80 mm bar capacity - parts catcher gantry type -barfeed interface - very well tooled - low hours Fjdpfot E A Acex Aabsgh

Condition: good (used), Year of construction: 2013, functionality: fully functional, turning diameter: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, Main and sub spindle C-axis on main and sub spindle 3 turrets Fgedswzl Enopfx Aabeh Tool monitoring Conveyor belt Portal unloading device Chip conveyor

Condition: excellent (used), Year of construction: 2019, HYPERTURN 65-1300 (SM2Y2) DUOTURN with 2 turrets incl. milling drive and 2 Y-axes High-performance CNC turning/milling center for complete machining of turned and milled parts, with 1300 mm spindle distance; Integrated spindle motors (ISM) on main and sub spindle (liquid-cooled), preloaded roller guides. Drive power: Main spindle - 29 kW Sub spindle - 29 kW Speed range: Main spindle 0 – 5000 rpm Sub spindle 0 – 5000 rpm Spindle connection (DIN 55026): Main spindle: KK 6 (max. bar capacity ø 65mm) Sub spindle: KK6 Y-axis in both turret slides: • Travel range: +/- 50 mm Includes: • Hollow clamping cylinder including draw tube • Parts ejector and coolant flush through the sub spindle • Sinumerik 840D-sl/OPERATE control o emcoNNECT/APP-based operating interface o 22" multi-touch display o IPC with 240 GB o SHOPTURN conversational programming o USB interface o Network drive / Ethernet o 3D simulation o and much more. • 2x 12-station tool turrets VDI 30, radial with directional logic for up to 2x 12 live tool stations! Swivel speed adjustable with the feed switch. o Performance data: o Max. 6.7kW at 2650 rpm o Constant torque 25 Nm o Speed range 0–5000 rpm o C-axis for main and sub spindle o TRANSMIT software for easy C-axis programming • Chip conveyor with programmable ejection height of 1200mm (hinged belt type) • Coolant system integrated in the chip conveyor 2x process pumps 14 bar (turrets) 1x rinse pump 4.8 bar (main spindle / working area) 1x rinse pump 3.7 bar (sub spindle) • Control cabinet air-conditioning unit • Hydraulic unit • Machine lamp • 230 V power socket at control panel Fodpfx Ajw T Apgsabegh • 5 leveling elements • Documentation Including: Bürener Maschinenfabrik: chip conveyor Various accessories Year of manufacture: 2019

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS CNC Control: MSG-501 Axes X axis travel (mm): 215 Z axis travel (mm): 490 Y axis travel (mm): +40 / -30 Max. Turning Diameter (mm): - Fjdpsxfv E Djfx Aabsgh C-axis increment (°): 0.001 Max. Turning Length (mm): 510 Cutting feedrate X, Z, Y (mm/min): - Swing over bed (mm): Ø 300 Swing over cross slide (mm): Ø - Bar capacity (mm): Ø 56 (main) Max. rapid traverse X, Z (m/min): 24 Main Spindle Spindle speed (rpm): 5,000 Spindle power (kW): 7.5 Torque (Nm): - Main spindle bore (mm): - Main spindle nose: A2-5 Sub-Spindle Spindle speed (rpm): 5,000 Spindle power (kW): 7.5 Torque (Nm): - Sub-spindle bore (mm): - Sub-spindle nose: A2-5 Turret Number of turret positions: 12 Number of driven tool stations per turret: 12 Driven tool speed (rpm): 6,000 Driven tool power (kW): 5.5 EQUIPMENT Chip conveyor: Included LNS Quick Load Servo II bar feeder: Included Overhead Gantry. MSG-501 (Fanuc) CNC Control: Included Set of fixed and rotary tool holders: Included 3-color status lamp: Included Bar loader interface: Included Manuals: Included MACHINE DIMENSIONS Length (mm): 2,705 Width (mm): 2,000 Height (mm): 2,120 Weight (kg): 5,800

Condition: ready for operation (used), Year of construction: 2006, operating hours: 20,695 h, Control Unit Brand MAZATROL Model Matrix Movement Fgsdpfx Aaexbumfjbsh X-Axis Movement 630 Y-Axis Movement 230 Z-Axis Movement 1585 W-Axis Movement 1546 Additional Equipment Options Screen: Picture available This 5-axis Mazak Integrex 400 IV was manufactured in 2006. It features a Mazatrol Matrix control, a 12-inch chuck, and a steady rest supporting 70-230mm. The machine offers a milling spindle speed of 12000rpm and a turning spindle speed of 2800rpm. If you are looking to get high-quality turn-mill capabilities, consider the Mazak Integrex 400 IV machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm Fsdpfxoxb Efre Aabsgh turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: used, Max. Turning Diameter: Ø690 mm Max. Machining Diameter: Ø400 mm Max. Machining Length: 560 mm Main Chuck: 10 inch / Sub Chuck: 6 inch Main Spindle: 3,500 rpm / 18.5 kW Fodpfx Aaexgm Swobegh Sub Spindle: 4,500 rpm / 11 kW Bar Capacity: Ø65 mm (main spindle) Bar Capacity: Ø45 mm (sub spindle) 12-station turret (with milling support) Y-axis travel: ±60 mm C-axis: Positioning with precision indexing Control Unit: Fanuc 0i Plus

Condition: used, Year of construction: 2008, bar capacity 65 mm number of spindle speeds 5.000 U/min control Siemens 840 D no. of tools in turret 1 12 no. of tools in turret 2 12 no. of tools in turret 3 12 Stk./pcs. tool taper VDI 30 driven tools turning speeds 4.000 U/min travel -x1 axis 165 mm travel -z1 axis 220 mm travel -x2 axis 165 mm travel -z2 axis 150 mm travel -x3 axis 165 mm Fedpfoxbtqisx Aabsgh travel -z3 axis 650 mm travel -y3 axis 80 (+50/-30) mm CNC Turning- and Milling Center | DMG - Sprint 65 linear equipped with main/counter spindle, a 3x turret for driven tools, bar feeder and chip conveyor as well as internal counter-spindle flushing with coolant. The machine is in a well-maintained condition and can be inspected at any time under power. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint65Gildemeister | Sprint-65 | Sprint65