Used center lathes 400-499mm turning diameter over bed for sale (217)

Condition: good (used), L+Z lathe ERNAULT-SOMUA Cholet 435 Gjdpfx Aexy Uaveh Dsuk

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm Gujdpfx Ahelzm Eqj Dok turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: used, Year of construction: 1979, functionality: fully functional, Leadscrew and feed rod lathe Make: WEILER Model: COMMODOR Year: 1979 Technical Data Manufacturer: Weiler Model: Commodor Centre distance: 1000 mm Swing over bed: 400 mm Spindle bore: 50 mm Speed range: 63-2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: approx. 1.5 t Gusdpfx Ahjxt Ngqs Djk Equipment • 3-axis digital readout • Drill chuck • Röhm 3-jaw chuck, D 200mm • Multifix toolpost • The additional 3-jaw chuck shown on the machine is not included in the scope of delivery! All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 220 mm, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 220 mm, center height: 200 mm, turning length: 1,000 mm, TOS SN 40B Gap Bed Lathe Godpfx Ajxxyy Ssh Douk Model: SN 40B Swing over Bed: 400mm Swing over Saddle: 220mm Swing in Gap: 600mm Distance Between Centres: 1000mm Spindle Speeds: 22 – 2000 RPM Spindle Bore: 50.8mm Motor: 5.5 KW Machine with: 3 jaw chuck 4 jaw chuck Quick Change Toolpost Fixed Steady

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: Knuth, lead screw and feed screw lathe type PICATOR 215/1250 -Machine bed: hardened Godpfx Ahjwv Uvfo Djuk -Turning length: 1260 mm -Turning Ø over bed: 470 mm -Turning Ø without bridge bed: 600 mm -Turning Ø over support: 280 mm -Spindle bore: Ø 55 mm -Spindle speeds: 36 - 2000 rpm -Wedge bar chuck: Forkardt Ø 200 mm -Tailstock mount: MK4 -Drive: 3.6 kW -Accessories: 1x steady rest, Multifix tool holder, tools see photos -Dimensions: 1020/2210/H1190 mm -Weight: 1200 kg

Condition: excellent (used), Year of construction: 2015, functionality: unexamined, turning diameter over bed slide: 560 mm, center height: 280 mm, center width: 1,420 mm, rotational speed (max.): 1,600 rpm, overall weight: 2,300 kg, For sale is an Optimum TH5615 lead and feed screw lathe from 2015 (7.5 kW). Designed for precision turning of single parts, small batches, or repair components. With a center height of 280 mm, a distance between centers of 1,420 mm, a maximum spindle speed of 1,600 rpm, robust construction, and a powerful 7.5 kW motor, it is ideal for professional workshops, training facilities, or production operations with high quality standards. The machine is in condition appropriate for its age, has not been inspected, and is offered as-is. Gjdexyx E Nepfx Ah Deuk Our Service Commitment: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specialized in Mazak machines and other brands. We place great value on personal service and are happy to support you at any time even after your purchase. With us, you are in the best hands—professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information subject to change without notice.

Condition: used, Year of construction: 1966, functionality: fully functional, Equipment: documentation/manual, Good morning, I am offering for sale a Stanko 5A250 bevel gear planer. The machine is in very good technical condition and comes complete with all devices for adjusting the knives and accessories. Price: 7,000 EUR Technical data: Maximum pitch circle diameter: - Ratio 10:1: 500 mm - Ratio 2:1: 450 mm - Ratio 1:1: 350 mm Module: 1.5 – 8 Maximum tooth length: 90 mm Number of gear teeth: 10 – 150 Number of tool speeds: 9 Range of double strokes of the cutter: 75 – 472 min⁻¹ Time required to cut one tooth: 8 – 123 sec. Power: - Main drive: 3 kW - Hydraulics: 2.2 kW - Cooling: 0.15 kW Machine dimensions: - Length: 2200 mm - Width: 1600 mm - Height: 1800 mm Weight: 8,700 kg Godsxwp Ngopfx Ah Djuk

Condition: good (used), WEILER DA 260x1000 Gap Bed & Leadscrew Lathe - 3-axis digital readout (new) Gjdpfxjxyugcs Ah Douk - Centre height: 260 mm - Swing over bed: 535 mm - Swing over cross slide: 345 mm - Distance between centres: 1000 mm - Spindle bore: 71 mm - Speed range: 33 - 1500 rpm - Automatic longitudinal and cross feeds - Thread cutting: metric / inch / diametral etc. - Tailstock: MT 4 - Motor power: 7.5 kW - Chuck nut (new) - Multifix toolpost base with insert - 3-jaw chuck: 350 mm - 2x emergency stop - Electric chuck guard (new) - Chip guard (rear) - Coolant system - Drill chuck / live centre - Documentation Dimensions (LxWxH): 2.7 x 1.5 x 1.7 meters / weight: 1700 kg Errors and omissions excepted.

Condition: used, turning diameter over bed 370 mm turning diameter over slide rest 200 mm turning length 1000 mm centre height 185 mm spindle bore 56 mm tailstock quill taper MT 4 turning speeds 50 - 2000 U/min power capacity 4,0 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,3 x 1,1 x 1,3 m Center lathe 200mm three-jaw chuck Gjdpoxfwckjfx Ah Douk Size B Multifix tool post 3 Multifix tool holders Emergency stop device

Condition: new, Year of construction: 2026, turning diameter over cross slide: 690 mm, spindle bore: 155 mm, turning diameter: 1,090 mm, turning diameter over bed slide: 1,000 mm, center height: 500 mm, center width: 700 mm, turning length: 6,000 mm, bed width: 700 mm, rotational speed (max.): 1,000 rpm, Equipment: rotational speed infinitely variable, Heavy-duty lathe with infinitely variable speed control in 4 ranges. Digital position indicator / digital measuring device with constant cutting speed control - High motor power of the main drive 30 kW in standard version (applicable in the range from 5 - 1000 rpm) - Rigid main spindle with 132 mm bore - Bed width 700 mm - Prismatic guide, rigid cross slide Accuracy according to DIN 8607 - Rigid main spindle: TUS 800 /100/1250 with 155 mm spindle bore, mounted in precision bearings Manufacture: FAG or SKF Spindle holder according to DIN 55027/15 - Hardened guideways 48 +/-2 HRC - Locked chuck guard (max. TUS 800 = 760 mm, TUS 1000 = 960 mm, TUS 1250 = 960 mm) Rear, continuous chip splash guard - Moving front chip guard - Jogging gear for main spindle - Closed feed box of rigid design with sliding wheel blocks on splined shafts - Central lubrication for bed slide and facing slide - Central lubrication for headstock and feed box - Feed rates, metric and inch threads without wheel change - Rapid traverse lengthwise, crosswise and in top support - Safety shutdown of the handwheel on the bed slide or the hand crank on the cross slide during rapid traverse movement Gujdpfxeugwrgj Ah Dsk - Feed direction change on the bed slide and also on the headstock - Quick-change tool holder model D1 Scale ring on the bed slide and tailstock handwheel - Scaling on the tailstock quill 2-stage tailstock quill/ with gear ratio 1:1 and 1:4 - Electrically adjustable tailstock Support for lead and feed spindles from 2000 mm SW - CE and declaration of conformity

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 460 mm turning diameter over support: 388 mm turning length: 1016 mm centre distance: 1016 mm center height measured in bed: 230 mm turning dia. in gap: 640 mm spindle bore of work spindle: 52 mm range of revolution per miute: 30 - 2000 / 12 step U/min feeds:: längs: 0,032 - 0,898 mm/U feeds:: plan: 0,016 - 0,449 mm/U tailstock quill taper MT: 4 tailstock quill adjustment:: 120 mm total power requirement: 3,75 kW weight of the machine ca.: 1,6 t dimension machine xH: 2,1 x 1,1 x 1,5 m Switchable gearbox Quantum 3-way length measuring system Top slide adjustment +/-90° Multifix quick-change steel holder 3-jaw chuck Ø 200mm rotating center in tailstock Threads: Inch thread; Metric thread; Trapezoidal thread; Module thread Accessories: Change gears, machine feet, 1x fixed quill tip Gsdou Ixzbspfx Ah Deuk *

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos Gsdjw E Nkiopfx Ah Djuk -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Condition: good (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 3251, turning diameter over cross slide: 230 mm, spindle bore: 45 mm, turning diameter: 440 mm, center height: 220 mm, turning length: 1,200 mm, total length: 2,600 mm, total width: 1,100 mm, total height: 1,700 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 26 rpm, metric thread diameter (max.): 112 mm, metric thread steps: 40, overall weight: 2,000 kg, three-jaw chuck diameter: 200 mm, This centre lathe is equipped with digital readout on two axes, a central lubrication system for the carriage, a complete cooling system, chuck guard, and meets the minimum safety requirements. Gjdpfexxx Arox Ah Deuk

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 215 mm Center width: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 7.5 kW Gusdpeu T E Ehjfx Ah Dsk Spindle speed range: 20-2000 mm Weight approx. 1680 kg Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, Year of construction: 1990, gefült mit 43 Aufnahmen height 2.200 mm width 1.200 mm weight of the machine ca. 300 kg Godpfx Ashc Rf Teh Dsuk +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Swing dia over bed 400 mm Swing dia over crosss slide 220 mm Between centers 1500 mm Gjdpfx Ahsxiymtj Douk Spindle hole 50 mm Spindle speed 12,5 – 3150 rpm Spindle power 5,5 kW Power required 16 kVA Dimensions L x W x H = 2900 x 1000 x 2200 mm Weight cca 1600 kgs Accessories, features - 3 jaws chuck, D200 mm chuck - 4-fold tool holder - Tailstock - Display motor load - Rapid speed - Driwing system by clutch - Spindle break - Splash wall - Hardened and ground linear guides are in perfect condition - Steady rest - Coolant unit - Manual The machine is in great and original technical condition. It was barely used. No DRO system on it.

Condition: used, Technical details: turning diameter over bed: 560 mm turning diameter over support: 280 mm turning length: 2000 mm centre height: 280 mm centre distance: 1600 mm spindle bore of work spindle: 65 mm range of revolution per miute: 9...1800 / 24 step U/min longitudinal feeds:: 0,025-0,09 mm/U cross feed: 0,012-0,045 mm/U tailstock quill adjustment:: 225 mm tailstock taper MT: MK5 total power requirement: 18 kW weight of the machine ca.: 3,8 t dimension machine xH: 3,7 x 1,6 x 2,05 m Three-jaw chuck D=320mm Top slide rotatable 45 degrees right and left Guedpfx Ahswa I She Dsk *

Condition: not inspected (used), Year of construction: 1977, functionality: unexamined, machine/vehicle number: 192.6155-06, spindle bore: 62 mm, turning diameter over bed slide: 270 mm, center width: 1,150 mm, turning length: 1,000 mm, spindle speed (max.): 2,240 rpm, No minimum price – guaranteed sale to the highest bidder! This machine is being auctioned due to a business closure. Placing a bid obligates the buyer to collect the item within the specified pickup window: January 26, 2026 to January 29, 2026. TECHNICAL DETAILS Swing diameter over bed (max.): 485 mm Turning length (max.): 1,000 mm Swing diameter over cross slide (max.): 270 mm Distance between centers (max.): 1,150 mm Spindle bore diameter: 62 mm Internal taper, metric (max.): 70 mm Maximum tool shank size (W x H): 25 x 25 mm Godpfxoxqg Ako Ah Deuk Leadscrew: 6 mm Tailstock quill taper: Morse 5 Manual quill travel (max.): 119 mm Cross-slide travel from center position (max.): 110 mm Spindle speed range: 11.2 – 2,240 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,000 x 1,600 mm Weight: 1,500 kg EQUIPMENT Tailstock Multifix quick-change tool holder 3-jaw chuck, diameter: 250 mm, Manufacturer: FORKARDT Multifix tool holder, type: BD 25140 Multifix tool holder, type: BD 25120 Turning tools Steady rest (diameter approx. 150 mm) 4-jaw face plate, diameter: 450 mm

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 7.5 kW Spindle speed range: 20-2000 mm Gujdpfou T Hiusx Ah Djk Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, Year of construction: 1982, centre height ca. 150 mm centre distance 1300 mm vorhanden diameter ca 250 mm digital readout 1x Godpfx Asp Icp Ujh Dsuk make Heidenhain u. Werkzeug-Sc serial number 63-06

Condition: used, Year of construction: 2016, Technical details: turning diameter over bed: 402 mm turning dia. over face-slide: 245 mm turning length: 1000 mm centre distance: 1000 mm centre height: 200 mm swing diameter: in Kröpfung: 560 mm throat: Breite: 120 mm revolution per minute: 40 - 345 / 345 - 1015 / 1015 - 2800 U/min feed: längs: 0,05 - 0,752 + quer: 0,025 - 0,376 mm/U spindle diameter: Ø 42 mm tailstock taper ISO: MK4 tailstock quill stroke: 180 mm total power requirement: 4,1 kW Weight approx.: 1,2 t dimension machine xH: 2,4 x 1,0 x 1,7 m Die Drehmaschine verfügt über keinen Eilgang. Positionierung über 2-Achsen Anzeige über Pinacho Lathe Controller Multifix-Stahlhalter mit Drehmeißel Kühlmittelanlage Fußtaster Gsdpfjvav Sdsx Ah Douk Gewindeschneiden möglich (metrisch, Whitworth, Modul, Pitch) *

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Tip height: 215 mm Gusdpfx Ascir Aneh Dok Center width: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Equipment including Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, Year of construction: 1955, Technical details: turning diameter over bed: 420 mm turning diameter over support: 240 mm turning length: 1100 mm turning dia. in gap: 600 mm range of revolution per miute: 24 - 900 / 8 step U/min spindle bore: 41 mm range of feed in x - axis: 0,0120 - 0,1000 mm/U Gedpfx Asu Ix D Ash Deuk range of feed in y - axis: 0,0062 - 0,0302 mm/U tailstock quill taper MT: 3 tailstock quill adjustment: 220 mm total power requirement: ca. 4,0 (ohne Gewähr) kW weight of the machine ca.: 1,2 t dimension machine xH: 2,3 x 0,9 x 1,3 m Equipment: 3-jaw chuck Ø 200mm Tool holder 4-way, swivelling 30° right/left T-slot for copying device Driving disc *

Condition: used, Year of construction: 1970, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 1000 mm center height measured in bed: 250 mm centre distance: 1000 mm revolution per minute: 18...1800 / 21 step U/min spindle bore of work spindle: 56 mm tailstock quill adjustment:: 180 mm longitudinal feeds:: 0,08 - 3,26 mm/U cross feed: 0,04 - 1,63 mm/U Rapid feed X axis: 4,2 m/min. total power requirement: 7,5 kW weight of the machine ca.: 2,9 t dimension machine xH: 2,6 x 1,1 x 1,3 m 4-jaw chuckØ 250mm with internal jaws live center in tailstock 4-fold quick-clamping tool holder coolant system Accessories: Gujdovvrpkepfx Ah Dok various reduction sleeves MK3-MK5-MK4 revolving tip "Clamping heart" 3-jaw chuck Ø 250mm with inner jaws The machine does not comply with APR (accident preventing regulations) *

Condition: used, Year of construction: 2015, Technical details: turning diameter over bed: 420 mm turning diameter over support: 255 mm turning length: 1000 mm turning dia. in gap: 580 mm centre height: 205 mm spindle bore of work spindle: 52 mm range of revolution per miute: 30 - 550 / 550 - 3000 (FU gesteuert) / 2 step U/min feed:: längs: 0,05 - 1,7 mm/U feed:: plan: 0,025 - 0,85 mm/U tailstock quill taper MT: 4 tailstock quill adjustment:: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,5 t dimension machine xH: 2,1 x 1,1 x 1,5 m Thread cutting possible, e.g. metric thread and inch thread Infinitely variable speed control 3-axis position indicator 3-jaw chuck Ø 200mm Multifix size B quick-change tool holder * Guedpfx Aovaxi Ejh Dsk