max. plate size: 2000x1000 mm
max. mould height: 610 mm
Bwk7bihfzy
voltage: 400 V 50 Hz
total motor power: 2,92 kW
total heating power: 63,3 kW
max. permissible air pressure: 10 bar
Underheater was renewed at the end of 2017 after damage.
Various clamping frames available.
The machine can be inspected at any time.
All information without guarantee.
Used machine sale without warranty.
Vacuum Form machine for the production of plastic Blister packaging
PS, PVC, PET etc.
- Un-winder
- Top heating plate
- waste windier
- With moveable bottom table
- With a stacking unit.
Forming area (mm): 500 x 350
Film width (mm): 540
Bvuhzs3lyi
Depth (mm): 100
Illig vacuum forming machine of the type UA 200/4 g P, basic machine with following additional equipment:
- 2-cylinder plug assist with 4 synchronized racks, remote
adjustment and digital setting of speed, automatic tool clamping
via 4 locking devices
- 3 vacuum pumps, each 100 m³/h
- material sag control with light barrier above lower heater
- 8-up reinforced cooling fan = 8 x 22 cbm/min
- 8-up spray nozzle device
- central lubrication with hand pump for forming machine
- electr...
For sale is a UA 100
table size approx. 1000 mm x 600 mm
mould size approx. 800 mm x 450 mm
The machine was last used 3 years ago and is no longer needed.
The machine is ready for use.
To the machine there are 9 clamping frames (upper and lower frame each)
with the approx. sizes:
900x520mm; 805x360mm; 660x460mm; 580x380mm; 460x210mm; 710x410mm; 450x450mm; 520x340mm; 400x300mm.
The racks are placed in a shelf on pallet structure, which is also purchased with the purchase.
Furthermore, the machine...
Floating bath.Full inox.4 expanding shnecks.Perfect condition.
Dxqujm
max. forming area 950 x 750 mm
93roibq
Heating output: 24.6kW, compressed air supply: 10bar.
Cekokk9i
ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm
Equipment machine:
> automatic loading including roller block and
Sheeter for additional roll production
> Screen controls
> Upper and lower heating can be regulated via 4 zones
> Automatic pre-blow and demolding
> Vacuum cascade can be set to 5 percentages
- table speed, upper punch speed, pre-blowing,
...
Quotation for second-hand machine
Illig form-, filling- and sealing machine FS 31, machine number: 186, WE 971
Illig form-, filling- and sealing machine type FS 31, basic machine with the following additional equipment:
- NC equipment Siemens S7, with OP 17 operator panel
- 2-up roll stand for container material including cutting and
splicing device
Dbdb9zgz
- automatic joint identification of container material
- separately moved 1 zone contact heater
- male vacuum forming device
- plug...
Thermoforming machine (2.700 x 2.300 mm)
SMA-REF-6193
Type: thermoforming machines
Manufacturer: Cannon Shelley
Model: PF 2621
Year: 1999
Working range:
2.700 x 2.300 mm
Stroke: 1.000 mm
Bbdiqniir0
Condition:
ready for action
unser power
Location: Western Germany
Availability: on demand
THERMOFORMING MACHINE, maximum moulding size 1300mmX 900mm, mould surface 1200mm x 800mm, maximum drawing 600mm with double heating, maximum plate thickness 12mm, quartz resistances, protective glass bottom heating, motorized top and bottom heating with individual control through screen, automatic blowing and demoulding, pre-blowing by light bar, buckling control of the plate, quick mould clamping by rotating cylinder. Machine completely revised, painted and in perfect working condition.
Bssmn0p...
> Sealing machine with 4 station rotary table.
> Carton feeder + additional carton feeder and product removal station
> Technically overhauled and newly painted
Cw07dag3
Second-hand machine offer
Illig vacuum forming machine UA 100 Ed, # 462, year 1993, WE 1103
Illig vacuum forming machine type UA 100 Ed, basic machine with the following additional equipment:
- electronic control system type Schleicher with service module
- digitally adjustable pneumatic functions with valve cascades
- plane-parallel lifting upper clamping frame
- automatic pre-blowing and demoulding (via time)
- additional pre-blowing automation via light barrier
- automatic blow box venti...
We offer an extensive range of Schleicher products. And even if we don't have it in stock, you send us your defective components and we repair them. Not only Schleicher but many more, e.g. Siemens, Elau...
Visit us on our website.
Hmjacx7cq
Quotation for second-hand machine
Illig vacuum forming machine RV 53, # 164, 1988
Illig vacuum forming machine of the type RV 53, basic machine with following additional equipment:
- material roll stand for 1200 mm diameter
- lower heater with cross-row control incl. material sag control
- heating for steel rule die
- stacking station with counting and push-out device
Year of construction: 1988
Condition: ready for operation
Price: on request, ex works, subject to prior sale
G...
> Completely overhauled and newly painted.
Cxvxm0rw
Quotation for second-hand machine
Illig vacuum forming machine RV 53, # 250, 1988
Illig vacuum forming machine of the type RV 53, basic machine with following additional equipment:
- material roll stand for 1200 mm diameter
- lower heater with cross-row control incl. material sag control
Bt2lcbnfk3
- heating for steel rule die
- stacking station with counting and push-out device
Year of construction: 1988
Condition: ready for operation
Price: on request, ex works, subject t...
> completely overhauled and newly painted
Bk7pw3hzbp
> Passage width 900mm
> roller table
> completely overhauled and newly painted
> Passage width 600mm
> roller table
Ft3owhst
> Sealing machine with 4 stations.
> Lift-in and lift-out station.
Bk7qgctx9c
> Further details on request
> Cut-off saw TS 100 c, with conveyor belt, suction belt, extraction, adjustable treadmill and saw blade.
> 4 hold-down devices, new wheels and new bearings.
> Machine completely overhauled and new painted.
> Passage width of 600mm
> Further details on request.
Mvbm9o
> 2-column stations (electromechanical)
> PP/PVC/PET/PE All materials can be processed
> automatic foil unwinding
> Film suspension for bottom films
> Film transport for multiple gripper and electromechanical drive
> Film gripper bar in the heating and forming area
> Filling section in bridge design
> Filling line extension to approx. 3.000mm
> Package and position control in the punching area
> Package conveyor belt 1.500mm
Bk7qrwrtmj
> Waste cross cutter with waste chute
> SPS control Schleich...
> Top heating with pilot radiator control
> Single radiators of the top heating
> 2 cooling fans D05
> Automatic preblow and demoulding
> Documentation and plans in German
Bk7q7kpozq
> Max. forming area 1210 x 500
> Longitudinal and cross cutter with 6 quick-change squeezing knives
> Euro hole punching device (can be retrofitted at extra charge)
> completely overhauled
> Top heating with small single radiator via toggle switch
> Underheater large radiator
> Upper stamping unit
> Protective grille pneumatically lockable
> 4 cooling fans D05 with spray nozzles
> Automatic preblow and demoulding
Bk89vdm2sl
> Blister machine HSA 50 C RD 50 C incl. cooling unit, tool and pallet set
> all defective parts replaced and repainted
> tested and fully functional
Fvahdkwl
> With additional carton applicator.
Fvsdj3ih
> completely overhauled.
> Packaging machine with 700x500x250mm format.
Bk7r8nb9i9
> In addition a cutting device to separate the packaging (SG 500)
> Roller bracket
> Control system Siemens S7
Obgrl
> Top heating
> Max. forming area 775 x 505 mm
> Max. moulded part height 150 mm
> Longitudinal and cross cutters
> completely overhauled and newly painted
> Skin machine and blister machine with longitudinal and cross cutter, Euro perforation.
Bk7shlfib7
> Completely overhauled and newly painted SB 74c-10 with steel strip punch and residual material take-up. New conveyor belt.
> Size 770 x 505mm.
> On request also as c-9 or with upper punch.
> Small moulding machine with the format 350x250x90.
> For skinning and blistering of small batches.
> As a sample machine for every company.
> Optionally also with upper punch.
Hdmmc3b9
> Further details on request.
> Completely overhauled and newly painted
> Material size max. 1500 x 1250mm
> Tool size max. 1450 x 1200mm
> Tool height max. 700mm
> Material thickness max. 12mm
> Control SIEMENS SIMATIC S7
> Top heating with 5 zone control, HTS (700ºC)
> Underheater with 5 zone control HTS (500ºC)
Blksq9ubgz
> 6-fold cooling fan Do6
> 6-fold spray nozzles
> Table speed via cascade 7-fold
> Upper punch adjustable via motor
Used Deep drawing machinery
Completely search Machineseeker and more than 2,00,000 used machines now.This may be of interest to you
How to receive 100% of our e-mails
Olympic Games: Machineseeker sponsors Team Germany
Morlock Motors official partner of Machineseeker and Truckscout24
