Used Illig Ua 100 for sale (26)

Condition: reconditioned (used), > Top heating with small individual heaters controlled by toggle switches > Bottom heating with large heater > Top clamping system > Protective grille Fodpfxofug Ano Aptsgg > 4 cooling fans D05 > Pre-blowing and demolding automation

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air Fodpjwf Dvajfx Aptjgg - Automatic tool change system Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Optional retrofit for roll processing: - Cross cutter and feeding rollers in feed area - RO 800 roll stand

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Equipped with a PR-type coil unwinder. Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Quick clamping of reduction frames and tooling maximum width 700 mm maximum plate size 1000x700 Fodetv Ivzjpfx Aptsgg maximum sheet thickness 10 mm We take care of dismantling and loading onto your truck, which is available for collection.

Condition: good (used), Year of construction: 1990, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 1531, film width: 700 mm, type of input current: AC, total width: 700 mm, total length: 3,500 mm, total height: 3,500 mm, input voltage: 400 V, power of vacuum pump: 3,000 W, compressed air connection: 6 bar, working width: 700 mm, pump capacity: 100 l/min, mold height (min.): 300 mm, control cabinet width: 1,000 mm, operating temperature: 650 °C, Thermoforming machine UA 100 1 g year 1990 in good working order. Maximum sheet size: 1000x700x10 Upper heating 3 pilot emitters , lower heating 1 pilot emitter Motorized counter-mould height adjustment Quick clamping of upper and lower frame Quick clamping of tooling on lower table Quick clamping of tooling on upper table Lower film sag control Fsdpfx Aot Iracsptsgg Bubbling with photoelectric cell Memorizable bubbling and demolding intensity → cascaded pneumatic valves BUSCH 100 m/cube vacuum pump Machine stopped and stored following its replacement by a new ILLIG UA 4 g automatic machine Price of machine dismantled and loaded on your truck Possibility of putting it back into service if you wish to come and see it

Condition: excellent (used), Year of construction: 2017, operating hours: 748 h, functionality: fully functional, machine/vehicle number: 5231847, type of input current: three-phase, total width: 3,988 mm, total length: 4,740 mm, total height: 3,440 mm, input voltage: 400 V, compressed air connection: 6 bar, overall weight: 2,700 kg, Sheet thermoforming machine Machine for processing semi-finished products Maximum sheet size: 1,000 x 700 mm Minimum sheet size: 300 x 210 mm Maximum sheet thickness: 12 mm Minimum sheet thickness: 0.5 mm The machine is fully equipped and prepared for automatic feeding. Features upper and lower tool function, water-cooled molds. Intelligent control via pre-saved material parameters. The price includes a GEISS horizontal bandsaw HBS 1000. Fsdpfx Apeznbp Tetegg

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 1597, type of input current: three-phase, input voltage: 380 V, heating capacity: 25.5 kW (34.67 HP), ILLIG UA 150 E Thermoforming Machine + US 100 – Complete Package Description Complete ILLIG thermoforming and processing package consisting of two industrial machines, both manufactured in 1967. The package consists of an ADOLF ILLIG UA 150 E vacuum thermoforming machine together with an ADOLF ILLIG US 100 auxiliary processing machine. Both machines originate from the same production period and were used as part of a thermoforming production setup. 1. ADOLF ILLIG UA 150 E – Vacuum Thermoforming Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: UA 150 E Machine No.: 1597 Year of manufacture: 1967 Working / forming area: 1,500 × 1,000 mm Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 2.2 kW Heating power: approx. 25.5 kW Industrial vacuum thermoforming machine designed for forming thermoplastic sheet material. The machine is equipped with: Large 1,500 × 1,000 mm forming area Heating system Vacuum system / vacuum pump Adjustable forming controls Pressure and vacuum gauges Separate electrical control equipment Manual operating controls Integrated working/forming table 2. ADOLF ILLIG US 100 – Auxiliary Processing Machine Fgodpozx Ergefx Aptsg Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: US 100 Machine No.: 536 Year of manufacture: 1967 Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 1.1 kW Band length: approx. 3,570–3,670 mm The US 100 is an auxiliary processing machine intended for secondary processing of formed components. It is equipped with a large movable working table, electrical drive, adjustable working elements, and separate electrical controls. Complete package Both machines are offered together as one complete package. The sale includes: ILLIG UA 150 E thermoforming machine ILLIG US 100 auxiliary processing machine Associated electrical/control equipment shown in the photos A quantity of unused old-stock plastic thermoforming sheet rolls is also available and can be supplied separately or included by agreement. The machines are currently installed/stored in Greece and are available for inspection by appointment. EXW Greece. Dismantling, loading, and transport are at the buyer's cost and responsibility.

Condition: used, functionality: fully functional, ILLIG Universal Forming Machine Type UA 155 4g solo Technical Data - Siemens control system - Max. material size: 1500 x 1250 mm - Max. forming area: 1450 x 1200 mm - Max. tool height: 700 mm - Max. material thickness: 12 mm - Heating capacity: 96 kW - Total power: 105 kW - Electrical protection: 160 A - Vacuum pump capacity: 250 m³/h - Compressed air requirement: 6 bar Features - Top heater with 5-zone HTS control (700ºC) - Bottom heater with 5-zone HTS control (500ºC) - Cooling fan D06 - Table cascade Fjdpjxlzqfofx Aptjgg - Vacuum cascade - Top punch - Includes ILLIG chiller and ILLIG temperature control unit

Condition: used, Year of construction: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming Station - Schleicher P03 control system - Automatic tooling infeed and removal function - Top heater with ceramic elements and 5-zone control - Bottom heater with ceramic elements and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal crossbars for use with fixed-format frames - Lower clamping frame for frame installation from below, central clamping via electric motor - Bottom table pneumatically operated, rapid/creep speed adjustable by percentage - Upper stamp rapid/creep speed adjustable by percentage - Pre-blow automation adjustable by percentage - Pre-vacuum adjustable by percentage - De-moulding automation adjustable by percentage - Sheet sag control by light barrier with support air - Six-fold cooling fan - Large front opening for tool changes - Vacuum pump Sheet Feeding - Automatic sheet feeding system - Finishing heater in feeding area for pre-heating or final heating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning Fedpfx Asxlzrcoptjgg - Motorized transport lifter - Motorized adjustable transport width

Condition: used, Year of construction: 2007, functionality: fully functional, film width: 1,500 mm, ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm Equipment machine: Fsdpfx Ajft S Easptjgg > automatic loading including roller block and Sheeter for additional roll production > Screen controls > Upper and lower heating can be regulated via 4 zones > Automatic pre-blow and demolding > Vacuum cascade can be set to 5 percentages - table speed, upper punch speed, pre-blowing, demoulding, table vacuum > 8-fold air-blowers D06 > Lot control at the table > Ball table for easier mold changes > pneumatic blow box ventilation > Plate loading with centering table > Various clamping frames / window panels incl. We offer the machine in the following technical state: 1. technically tested with dry run acceptance 2. technically overhauled, blending in green, tested with dry run acceptance 3. technically overhauled, completely repainted in white and blue, tested with acceptance in dry running (example image in white / blue)

Year of construction: 1996, condition: used, Year of manufacture: 1996 Thermoforming, die-cutting for production from PET, PVC, PS, PLA films, etc. Working area: 500 x 740 mm Forming height: 150 mm Fgodpfx Aezu Nx Nsptjg Maximum film width: 540 mm Film thickness: up to 1.5 mm Installed power: 13 kW Busch pump New control system. The machine was overhauled in 2020 and is fully operational; it can be viewed in operation near Warsaw. Price: 23,000 EUR

Year of construction: 1986, condition: used, Year of manufacture: 1986 Fgsdpfx Ajzu Nw Eeptjg Three stations (forming, cutting – with a movable upper table, stacking) for the production of packaging from PVC, PS, PET, and PLA films. Equipped with upper heating elements. MAX. forming area: 500x350 mm Max. forming height/depth: 40/100 mm Max. film width: 550 mm Film thickness: 0.2-0.6 mm Installed power: 23 kW Vacuum pump capacity: 40 m³/h The machine underwent a major overhaul in 2021 and is fully functional. It can be seen in operation near Warsaw. Price: 35,000 EUR

Year of construction: 1987, condition: used, Year of manufacture: 1987 Three stations (forming, cutting – with a movable upper table, stacking) for the production of packaging from PVC, PS, PET, and PLA films. Equipped with lower and upper heaters. MAX. forming area: 500x350 mm Max. forming height/depth: 40/100 mm Max. film width: 550 mm Film thickness: 0.2-0.6 mm Installed power: 23 kW Fgsdpjzu Nvuofx Apteg Vacuum pump capacity: 40 m³/h The machine underwent a major overhaul in 2021, is fully functional, and can be seen in operation near Warsaw. Price: 35,000 EUR

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C Fgodeuk Dwfopfx Aptsg The machine is incomplete and not operational! For spare parts only!!

Condition: ready for operation (used), Year of construction: 2004, An Illig slide blister machine is available. Blister length range: 110mm-500mm, blister width range: 50mm-280mm, max. blister depth: 80mm, fold-over edge. An on-site inspection is possible. Fgedoyyplcjpfx Aptsg

Condition: ready for operation (used), Year of construction: 2005, Offered is an ILLIG HSA 30 RD - high-performance continuous sealing machine for blister packaging: blister films: PVC, PET APET/PETG, PS, film thickness: 150µm-600µm, lid materials: heat-sealable cardboard, aluminum composite films, Tyvek, sealing area X/Y max. approx. 500mm/300mm, forming depth max. approx. 100mm, 8-18 cycles/minute. Inspection possible by arrangement. Expected to be available June 2026. Fodpfxoylbrks Aptogg

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister packing machine, year of manufacture 1991. This is a high-performance automatic inline blister sealer with card feeder, suitable for film thicknesses from 150 µm to 400 µm (possibly higher, but not personally tested). The complete line is being offered (see pictures). Speed: 1–9 cycles/minute with 4-up production. Example: air freshener, 4 units per blister palette = 2000 blisters/hour. Approximate dimensions: 9m x 1m x 2.25m. Sealing plate size: 57x32cm. The machine is 100% functional and is still in operation. Inspection and trial run before purchase are possible. Location: Czech Republic (10 minutes past the Bavarian/Czech border at Furth im Wald). Fsdpey Anifofx Aptsgg

Year of construction: 1982, condition: ready for operation (used), A vacuum thermoforming machine Adolf Illig with a Busch vacuum pump is available. Form dimensions X/Y: 500mm/350mm, max. forming depth positive/negative: 100mm/100mm, max. mold height: 100mm, vacuum pump: Busch R5. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/2600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Fsdpszqu Eyofx Aptjgg

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Fgodpfx Apsq A Um Rotog Special equipment: Hollow floor facility available Control cabinet: included

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Fgedpfx Apjq Nn Hcjteg PRICE GREINER STACKING: € 6.500.- / LOT SWITZERLAND Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1126, film width: 540 mm, type of input current: three-phase, total width: 1,710 mm, total length: 3,070 mm, total height: 2,520 mm, overall weight: 838 kg, power: 1.9 kW (2.58 HP), Equipment: type plate available, Skinpack machine, packaging machine, thermoforming machine, vacuum forming machine -Manufacturer: Illig, skin pack machine type SK 74c -Foil width: 540 mm -Roller conveyors: each 1000 x 560 mm maximum -Work table: dimensions see photos -total Motor output: 1.9 kW -total Heating power: 8.9 kW -Dimension: 3070/1710/H2520 mm 838 kg -Accessories: incl. 8 foil rolls Ø290 x 540 mm 276 kg -Transport dimension: 1710/1070/H2520 mm / 1200/800/H700 mm -Total weight: 1114 kg Fgodoft Sccjpfx Aptsg + 500 kg foil

Condition: used, Year of construction: 1990, Name: Used packaging machine (thermoforming system) Manufacturer: Adolf Illig Type: SB 53C - DIN Year built: 1990 Fodpfx Apoxm Sa Hetegg Driving force: 1,24 kW Dimensions: L 1.600 x W 1.135 x H 2.710 mm Empty weight: 500 kg Technical doc.: Yes Message: Heating capacity: 4.5 kW (15 ceramic surface heaters) Vacuum system: Max. vacuum level 0.95 kp/cm2 Formats: Forming area: 405×500 mm Carton size: 400×495 mm Film width: 445 mm Positive drawing depth: 150 mm Negative drawing depth: 150 mm Packaging height: 150 mm Film roll diameter: 400 mm (blister) Film roll diameter: 350 mm (skin) Film roll core diameter: 70 mm Condition: Second hand Price: By request

Year of construction: 2011, operating hours: 29,420 h, condition: excellent (used), functionality: fully functional, Make Illig Model RDK 80 Year 2011 Approx Hours 29420 Stations Forming, Hole Punching, Robot, Cutting and Stacking Delivery date Immediately Max forming area 756 x 565 mm Max Sheet Width 805 mm Fgodpszam Hcjfx Apteg Depth of draw 120 / 120 mm Steel Rule Punching Force 600 kN Max cycles-minute 55 Forming pressure 6 bar All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 589-0263, Make Illig Model VHW 60/2 Year 2001 Condition Good Number of Heating Rolls Two Max material width 610 mm Max material thickness 1.8 mm Max temperature of heating rolls 140 °C Material wrap around 563 Grad Total connected load 36.0 kW Dimensions 2300 x 1400 x 2400mm L x W x H (300kg) Fjdpfx Aouzi I Eoptogg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale

Condition: reconditioned (used), functionality: fully functional, Technical specifications: • 4-station rotary table • Max. sealing area 350 x 250 • Max. blister depth 70 – 100 mm, depending on the product type • Sealing force 12,800 N • Heating power of the sealing heater 1.75 kW Fgedpofua Dcofx Apteg • Cardboard feeder • Package ejector • Cardboard forming unit • Cable with CEE 16A plug • Weight approx. 750 kg Machine available in all variants b, b-2, b-3, b-4.

Year of construction: 2006, condition: good (used), Illig SK 74-C from a workshop for the disabled Year of construction 2006 Fgedpfxsr Nv E Nj Apteg serial no.426-0172 +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600