Used Edgebanders for sale (588)

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, Full SCM line Cjlq Sqot T Sq Ee Nhegt

Condition: excellent (used), Year of construction: 2019, operating hours: 4,650 h, Functionality: fully functional, TECHNICAL DETAILS Machine stand: tempora 45.03L, made of thick-walled electro-welded steel construction Control x-motion plus control: Swiveling 15" smartouch Unlimited storage space for user-defined edge programs Fine adjustment of the path parameters Optimization of edge overhangs when pre-cutting at the front and rear Chain feed Feed speed: 9 m/min Drive motor: 1.5 kW (S6) Precision running and guide surfaces Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm Segmented, rubberized support pads with quick-change system Rotary table edge magazine Roll edge material diameter: 740 mm Roll edge material edge thickness: 0.4 - 3 mm Pull-out frame Workpiece support: extendable up to 450 mm with roller conveyor for ergonomic working with larger workpieces Upper Pressure beam Workpiece height: 8–45 mm Pressure beam made of welded, torsion-resistant steel construction Top pressure rollers arranged in two rows Edge feed Driven rubberized feed roller Edge thickness: 0.4 - 3.0 mm Workpiece feed Extendable workpiece support: up to 450 mm Chip removal joining unit: 0 - 2 mm (on the feed ruler), digital counter Joining unit Power: 2.2 kW, diamond cutter Z2, speed: 12,000 rpm 2x1.1 kW (1.5 HP) Chip removal: max. 2 mm Workpiece height: max. 45 mm Joining cutter with diamond cutting edges Z2+2, D-80 x 49 mm (angled and tear-free workpiece edge) Glue unit Glue unit: Teflon-coated, for 1.5 kg EVA or PUR Granules Cgolevy U R Ejq Sq Nhst Heating time: 10 minutes Linear meter output: 375 linear meters (for 19 mm board) Finely adjustable glue roller Pressure unit 1 aluminum roller at a 90° angle 1 rubberized pressure roller Scissor shears Roll edge material thickness: 0.4 - 3 mm Used for pre-cutting, swinging Cross-cut saw unit 0.15 kW, speed 12,000 rpm with 90° round shaft guide Cross-cut saw unit with 45° travel path with 0.35 kW, 12,000 rpm A choice between 0° and 10° cut is possible Milling unit Multifunctional milling unit: x-motion plus, 2 high-frequency motors, 0.75 kW each, 12,000 rpm Alternating blades: 4 each Accuracy: 2-axis adjustment enables Fine adjustment in the 1/100 mm range Motorized corner rounding unit Corner processing unit for post and softforming profiles Workpiece height: 10 - 45 mm Edge thickness: 0.4 - 3 mm HW milling cutter with 2 cutting edges Radius: max. 6 mm Workpiece length: min. 270 mm (at 19 mm height) Radius scraper unit Processing of 2 mm plastic edges Adjustment of the scraper via digital counter and m-motion positioning system Scanning of the workpiece contours Polishing unit Upper and lower polishing unit Spray device for cleaning agent Surface scraper Upper and lower surface scraper for any adhesive residue. Scanning of the workpiece contours Multifunctional milling unit for cup hinge drilling for processing workpieces with cup hinge drilling, rear wall grooves and acute-angled workpieces

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, Single-sided BRANDT KDF 660 Highflex edge banding machine - including LIGMATECH ZHR 05/R/065 return system (year of manufacture 2012) - PUR glue application (QA45 with automatic glue thickness adjustment) - POWERTOUCH Homag control - Workpiece thickness 8-60mm - Up to 15mm edge band can be processed - NC motor controlled axes, adjustment via the control Cgelq Sjvylxasq Nhst - Fully equipped with joining, corner copying and scrapers (profile & flat) - Release agent & cleaning agent Available from July/August 2025. Top condition. If you have any questions, please let us know.

Condition: like new (used), Edge Bander Cgelq Sqeu Hhnbe Nhot

Condition: not inspected (used), Year of construction: 1991, Power connection 400V / 11kW suction connection Ø 1x100 mm Compressed air connection 6 bar weight approx. 980 kg width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm workpiece width min. 60 mm Cslsiw D Udsq Sq Nhsgt feed rate 13 m/min edge thickness max. 5 mm, roll material 3 mm Edge magazine 1301 with DAZ 11 gluing station 1906 printing unit 1914 trimming unit 1976 Milling unit flush 1942 Milling unit radius R2 1943 scraper 1927 Buffing unit 1944

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt adhesive specification used, good condition make Artech-Biesse type Single year of manufacture 2007 machine no. 91009 CE type-tested Cgelq Sq Njvwgizohjt edge thickness 0.4 - 3.0 mm workpiece height min 10 max 120 mm space requirement approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW storage location 97447 Gerolzhofen, free loading, unpacked handed over in the current condition as viewed, without guarantee and warranty

Condition: new, Year of construction: 2024, Joining unit: Yes Edge thickness: maximum 3mm Workpiece thickness: from 8mm - 50mm Workpiece width: minimum 110mm Glue basin: granular, quick change basin cross-cut shear: yes cross-cutting / flush sawing: yes Milling station: chamfer / radius corner copying: yes Cgslqsk Eai Us Sq Nhot Flat - scraper: yes Radius scraper: Yes Buff: Yes Non-stick spray unit: Yes Infeed ruler adjustment: manual workpiece thickness adjustment: manual power input: 5 kW machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Condition: used, Year of construction: 2018, Functionality: fully functional, OLIMPIC K360 T-ER1 Előmaró egység X Végvágó egység: X Dönthető szintbemaró egység: X Egymotoros végkerekítő egység: X Ziehkling egység X Lapziehkling egység X Polír egység X Technikai adatok: Colqsttuc Se Sq Nhjgt Előtolási sebesség 11 m/min Előtolás motorteljesítménye 1,5 kW Önálló elszívó csonkok Munkadarab vastagság 8-60 mm Élanyag vastagsága 0,3-6 mm Tekercstartó átmérője 780 mm Minimális munkaszélesség: 90 mm Minimális munkahossz: Tekercsből 180 mm Szálanyagból (éllécből) 220 mm Két szomszédos munkadarab minimális távolsága: 600 mm Ragasztóanyag fűtőegysége Tartály kapacitása: 1-(1.5) kg Felfűtési idő: 12 perc Fűtőegység teljesítménye: 2,4 kW Végvágó egység Motor teljesítménye: 0,2 kW Fűrészlap dönthetősége: fix Fordulatszáma: 12.000 1/min Szintbemaró egység Motor teljesítménye: 0,3(0,55) kW Fordulatszáma: 12.000 1/min Lekerekítés rádiusza: 2 mm Round 1 végkerekítő maró egység Motor teljesítménye: 0,35 kW Fordulatszáma: 12.000 1/min Lekerekítés rádiusza: 2 mm Lapziekhling aggregát Ziekkling aggregát Lekerekítés rádiusza: 2 mm Polír egység Motor teljesítménye: 0,13 kW Fordulatszáma: 1.400 1/min Az Önök részére kialakított konfiguráció: Az ajánlatban szereplő gép 2018-as használt ára: R0 02 03 scm Olimpic K360 T-ER1 CE előmarós élzárógép végkerekítő egységgel, Orion One Plus vezérléssel 10 09 98 CE norma 62 12 03 Tapadásgátló spray egység 62 14 06 K2 végvágó egység Radius funkcióval RAS-V Radius ziekhling egység 62 15 04 Lapziekhling egység 62 12 12 Políregység AUTOSET készlet Gyorscserélhető ragasztózó rendszer,kettős hőmérséklet szabályzó rendszerrel

Condition: excellent (used), Year of construction: 1993, Klein - Edge banding machine KTD51 for moldings And straight edges, with direct glue application. Workpiece length min. 160 mm, workpiece thickness 10 - 40 mm Cgolq Sq Nsvf H I Tshst Edge thickness 0.5 - 1 mm, inner radius approx. 25 mm Year of manufacture 1993, feed adjustable 4 - 9 m/min, 2.6 kw, 400 Volt

Condition: reconditioned (used), Year of construction: 2017, RECONDITIONED SINGLE-SIDED EDGEBANDING MACHINE BRANDT MODEL:AMBITION 1650 FC Machine completely regenerated New dice , new rollers , regenerated aggregates , set of new tools glue pot regenerated and much more SUMMARY,EQUIPMENT: GLUING AGGREGATE 2 X 2,2 KW 200 HZ GLUING UNIT A12 CUTTING UNIT TRANSVERSE CHAMFER/STRAIGHT 2 X 0.35 KW MILLING UNIT 2 X 0.55 KW COUNTER-ROTATING FORMING UNIT 2 X 0,35 KW WD 60 PROFILE SCRAPER WITH QUICK-CHANGE HEADS FREE SPACE GLUE JOINT SCRAPER POLISHER Cjlqophnzao Sq Nhjgt - Feed speed ¦ 8 - 18 m/min - Max. feed rate with shaping knife ¦ 11 m/min - Max. feed rate with shaping knife In conjunction with VKNR 4839 ¦ 14 m/min - Working height ¦ 950 mm - Pneumatic connection ¦ min. 6 bar - Overall length ¦ 5,760 mm

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 3750, Machine glues solid wood up to 18.0mm and roll goods up to 3.0mm Cutting from the roll 3.0mm thick PVC, ABS, and real wood up to 2.0mm Flush chamfering 18mm Rounding and chamfer milling stations Total length 3.20m Power consumption 7.1 kW Glue container Cutting shears Infinitely variable feed Cutting saw for front and rear edge Celq Sqjigad Es Nhogt Flush milling unit Rounding milling unit Chassis Extraction connection 100 mm

Condition: used, Year of construction: 1994, 0,4-20 mm Cgelqsvwgg He Sq Nhjt Weight 2000 kg

Condition: used, Year of construction: 2022, Joining unit: Yes Edge thickness: maximum 3mm Workpiece thickness: 8mm - 50mm Workpiece width: min.110mm Glue basin: Granulate, quick-change basin cross-cut shears: yes Cut / saw flush: yes Milling station: chamfer / radius Corner copying: yes Celq Setk H Treq Nhogt Flat scraper: Yes Radius scraper: Yes Buff: Yes Non-stick spray unit: Yes Infeed ruler adjustment: manual Workpiece thickness adjustment: manual Power consumption: 5 kW Machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Condition: reconditioned (used), Year of construction: 2013, Machine after complete reconditioning CONNECTING UNIT 2 X 2.2 KW 200 HZ GLUING UNIT QA 65 MILLING UNIT INCLINED/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT Cgolq Sq Nsqnvtljhjt MILLING UNIT INCLINED/STRAIGHT MILLING UNIT 2 X 0,55 KW 0 DEGREE PNEUMATIC ADJUSTMENT 2 POINTS MULTIPURPOSE FORMING UNIT 2 X 0.4 KW PROFILE SCRAPER WITH QUICK-CHANGE HEADS PNEUMATIC ADJUSTMENT GLUE JOINT SCRAPER CLEANING UNIT

Condition: used, Year of construction: 1988, used, good conditionmanufactured by Brandttype F10 + EK 11 - trimmingbuilt in 1988Masch.-No. 0-260-01-2188/0-260-01-2746required space ca. 1100 mm x 1100 mm x 1700 mmlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revision,without guarantee and warranty Cgslq Sqovwf Txj Nhjt

Condition: new, Year of construction: 2024, Pre-milling unit: yes Pre-milling unit material removal: 0 - 2 mm plastic edges: 0,4 - 3 mm workpiece thickness: 10 - 40 mm Workpiece length min.: 90 mm Workpiece width min.: 120 mm Glue unit: granulate / glue container quick change kit Colq Sel D Rx Ajq Nhegt crosscut knife: yes flush cross-cut unit: yes flush radius trimming unit: yes radius scraper aggregate: yes Surface scraper aggregate: yes power input: 8 kW Machine length: Machine width: Machine height: Weight:

Condition: refurbished (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 0-261-97-5392, RECONDITIONED SINGLE-SIDED EDGEBANDING MACHINE BRANDT KDF 650 Cgolqju Eflnj Sq Nhjt

Condition: used, Year of construction: 1994, for pre-coated edges including a lot of edge material with outriggers on both sides end cap station Celq Sq Njvwfzvshegt 3-roller feed used, good condition Make Hebrock Type AKV-83 Year of construction 1994 Edge band thickness 1.0 mm Workpiece height max. 50 mm Workpiece width min. 50 mm Workpiece length min. 170 mm Space requirement approx. 1700 mm x 690 mm x 500 mm Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition as seen, without guarantee and guarantee

Condition: new, Year of construction: 2024, Pre-milling unit: yes Pre-milling unit material removal: 0 - 2 mm plastic edges: 0,4 - 3 mm workpiece thickness: 8 - 50 mm Workpiece length min.: 130 mm Workpiece width min.: 80 mm Glue unit: granulate / glue container quick change kit crosscut knife: yes flush cross-cut unit: yes corner copying unit: yes flush radius milling unit: yes radius scraper unit: yes Celqel D Rx Hj Sq Nhjgt Surface scraper aggregate: yes Buffing unit: yes power input: 9 kW Machine length: Machine width: Machine height: Weight:

Condition: used, Year of construction: 1993, with prejoiningused, good conditionmake Otttype Kantomat 156- FÜyear 1993glue thickness 15 mmworkpiece height min 10 mm max 60 mmworkpiece width min 60 mmworkpiece length min 60/160 mmthick edges up to 3 mmcaps from the roll up to 3 mmprejoiningcross-cutting unit K 14 / 2 x 1,1 PSflush milling HF15.1 2 x 1,5 PSChamfer 082 2 x 0,8 PS 0-45° swivelingRadius milling 2 x 0,8 PSRadius scraper controlled pneumaticBuffing oscillating pneum. with pneum. feed 2 x 0,3 HPautom. edge magazinefeed speed steplessgranulate quick heating basinsound insulation hoodlarge roller supportsuction connection D 160 mmspace requirement approx. 7400 mm x 1000 mm x 1600 mmtotal connected load 22 kWstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Colovwfyfoq Sq Nhogt

Condition: new, Year of construction: 2024, Pre-milling unit: yes Pre-milling unit material removal: 0 - 2 mm plastic edges: 0,4 - 3 mm workpiece thickness: 8 - 50 mm Workpiece length min.: 130 mm Workpiece width min.: 80 mm Glue unit: granulate / glue container quick change kit crosscut knife: yes flush cross-cut unit: yes corner copying unit: yes flush radius milling unit: yes radius scraper unit: yes Surface scraper aggregate: yes Buffing unit: yes Cslq Sel D Rx Rjq Nhegt power input: 9 kW Machine length: Machine width: Machine height: Weight:

Condition: used, Year of construction: 1983, usedMake Holz-HerType 1415Year of construction 1983MachineNo. 119GS-testedGlue system cartridge GranupressEdge thickness 0.4-25 mmWorkpiece height min. 6 mm max 60 mmWorkpiece width min. 60 mmWorkpiece length min. 140 mmFeed rate 8-11-15 m/ck edges up to 25 mmcaps from the rollsnipping unit 2 x 0.55 kW2 x flush trimming units 2 x 1.1 kW2 chamfer trimming units2 x buffing units 0.25 kW1 x sanding unit 1.75 kWgroove trimming unit 2.2 kWautom. edge magazinesuction connection 200 mmspace requirement approx. 6800 mm x 900/1400 mm x 1400 mmweight approx. 3500 kgtotal connected load approx. 13.5 kWstorage location 97447 Gerolzhofen, free loaded, unpackedhandover as viewed,without guarantee and warranty Cslq Sjvwfq Doq Nhsgt

Condition: new, Year of construction: 2024, Pre-milling unit: yes Pre-milling unit material removal: 0 - 2 mm Plastic edges: 0.4 - 3 mm Solid wood edges: 0.5 - 5 mm Workpiece thickness: 8 - 50 mm Celsl D Rx Uoq Sq Nhsgt Workpiece length min.: 120 mm Workpiece width min.: 110 mm Non-stick spray unit: yes Edge preheating device: yes Glue unit: granulate / glue container quick-change kit Snipping knife: yes Flush snipping unit: yes Corner cutting unit: yes Flush radius trimming unit: yes Radius scraper unit: yes Surface scraper unit: yes Buffing unit: yes Cleaning spray unit: yes Power consumption: 5 kW Machine length: 3774mm Machine width: 1546 mm Machine height: 1337mm Weight: 842 kg

Condition: new, - New -Description:- Top equipment for high productivity in a small space!- Intuitive operation with the eye-S control and 10"large touch screen: HMI Maestro Active Edge,Graphic display of all machining units and theiroperating status, Graphic simulation of machining operations,Control of all machining units, Regulationof glue tank temperature, Assistance functionsfor setting up the machine according to the machining program,Fault diagnosis for quick elimination of simple errors,Statistics on machining parameters, USB connection,Preparation for network connection, Preparation for Industry 4.0with data transmission protocol API REST- Excellent accessibility to the working aggregatesthanks to the large hood that ensures protection and noise reduction- Monoblock construction made of steel ensures high stabilityand rigidity of the machine- Automatic aggregate positioning when changingthe panel thickness- Automatic application of the strip edges with edge magazine(me 35 t s): The strip edges of solid wood areautomatically loaded and synchronized with the panel guide- Panel feed is made by feed chain with rubber glides- Extendable workpiece support- Adjustment of the infeed ruler via spacer platesTechnical data:Dimensions and weightsLength approx. 3314 mmHeight approx. 1300 mmWidth/depth approx. 1085 mmWeight approx. 545 kgflush radius milling unitflush radius milling unit input power 2 x 0,35 kWflush radius milling unit cutter speed 12000 min¯¹flush radius milling unit cutter diameter HM 55.3 mmFlush radius milling unit suction port diameter 2 x 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzGlue unitGlue tank input power 0,25 kWGlue tank suction port diameter 60 mmGlue tank working temperature 190 °CGlue tank filling quantity 0.8 kgPneumatic connectionOperating pressure 6.5 barAir consumption 470 l/minFeed rateFeed input power 0.55 kWFeed speed 7 m/minEdgesEdge thickness roll material 0.4 - 3.0 mmEdge thickness strip material 0.5 - 5.0 mmPre-milling unitPre-milling unit input power 3 kWPre-milling unit diamond cutter diameter 80 mmPre-milling unit material removal 0.5 / 1 / 1,5 / 2 mmpre-milling unit cutter speed 7200 min¯¹pre-milling unit cutter height 56 mmpre-milling unit exhaust diameter 2 x 80 mmscraper unitradius scraper 2 mmbuffing unitbuffing unit input power 2 x 0,14 kWbuffing unit speed 2800 min¯¹workpieceworkpiece thickness 8 - 50 mmworkpiece width min. 110 mmWorkpiece length min. 120 . 5507235 Cgjlq Sqsvwfmlj Nhst

Condition: new, 3 mm Total length 4122 mm Feed speed 10 m/min. with PLC control (incl. touchscreen) and hot-melt adhesive application to the workpiece foredgebanding material up to 3 mmjointing cutter (incl. DIA tool) up to 2 mm cutter depth1),maintenance-free glue tray with change tray pre-equipment incl. adhesive discharge device,HF cross-cut saw station (approx. 12,000 rpm),HF trimming station (approx. 12,000 rpm) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter,surface scraper (incl. pneumatic discharge device) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter) with separate pneumatic routing adjustment andinterchangeable plate router (combi version),corner rounding router,surface scraper (incl. pneumatic lift-out),free space (for cleaning station or radius scraper),robust chain drive,ball bearing mounted double roller top pressure,viewing window from rear of machine,pull-out workpiece support,feed rate approx. 10 m/. No. F4/00/11- Joining head WhispercutF4/500/10- Combination milling headF4/500/20- Radius milling cutter R=2mmF4/500/2- Radius corner milling cutter R=2mmF4/08/2- Quick-change equipment for corner milling cutterF4/08/4- Radius scraper (incl. F4/09- Radius radius scraper R=2mmF4/09/2- ChassisF4/10- Pneumatic 3-point adjustment(radius, chamfer, flush milling)F4/30 Cgelq Sqevwd Uuo Nhst