Year of construction: 1995, Condition: good (used), ARD EDM diesinking machine offered. Type: M 50 F Control unit: ARD system Facile A X-travel: 310 mm Y-travel: 200 mm Z-travel: 200 mm Bed: 360 x 600 mm Power: 5,5 KVA Crobehkttte Exi Edsb Spindle type: System 3R Spindle stroke: 200 mm Year: 1995 Dimensions: 150x135x210 cm LxWxH For more information call us or send an e-mail.

Condition: excellent (used), Agie Wire EDM Model: AGIE Cut Classic V3 Control: AGIE X – axis Travel: 500mm Y – axis Travel: 350mm Z- axis Travel: 426mm Creb Exijv Hrywo Edsb Workpiece Length: 1050mm Work piece width: 650mm Work piece height: 420mm Work piece weight: 800 kgs Dimensions: 1940 x 2300 x 2600mm high Weight: 3460 kg

Condition: repair required (used), Year of construction: 2004, Functionality: limited functionality, workpiece weight (max.): 800 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, Equipment: fridge, We are selling a Sodick wire erosion machine. It was purchased new in 2004 and was in operation until 2023. The machine needs to be replaced with a screen, seals,... a major service is required. The machine is located in the Sodick demo center near Zagreb, we can provide all support: start-up of the line, installation, transport and official service. Creb Eov Hw Dhoxi Edsb For more information, we are available:

Condition: used, Year of construction: 1993, table length 600 mm Csb Exi Eovzh Ruoderb table width 400 mm weight of the machine ca. 4 t dimensions of the machine ca. 3,5*3,5*2,5 m

Condition: reconditioned (used), Year of construction: 2021, Functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, GF Machining Solutions CUT P550 Pro Year of manufacture 2021 Uniqua control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 400 mm²/min Best surface: Ra 0.08 µm Available wire diameters: 0.15 to 0.33 mm Incl. wire cutter Incl. 3D probe Dimensions of the complete system: 2600 x 2640 x 2340 mm Total weight of the system: 3300 kg The machine is already in our warehouse and will be cleaned, serviced and thoroughly tested after the order has been received. We would be happy to offer you an individual test cut on the machine. Ceb Exiovyp Ufo Edsrb You receive a 6-month warranty on the machine. We would be happy to offer you commissioning of the machine.

Condition: like new (used), Year of construction: 2022, operating hours: 50 h, EDM 313MF30-SLM, Cjb Exomx Slhji Edsrb Year of manufacture 2008/2023 Technical data: Adjustment travel XxYxZ 620x420x400mm workpiece clamping table 1000x600mm tank size 1070x670mm Filling height of the working tank 400mm distance table-electrode holder 150/550mm Workpiece weight max.1500 kg Dielectric min. 1200 L dimensions 2550x2430x2500mm Weight of the machine 3900 kg Equipment: - color: aluminum metallic (silver) - new electrical cabinet - lifting speed (highjump) 15m/min. - contact protection new - cooling unit Termogamma TG13/14 - linear scale in all axes - C-axis 100rpm, direct measurement 0,0001 Holding brake - chuck EROWA ITS/Hirschmann/3R - Cartridge filter system - User interface MF30 V.3.0 - Exopuls+ 60A Rev. 4 - New ball screw, bearings, couplings - Screen Automation Touch Panel - Hand control panel with enable button - Pumps, filling - filter - and spraying pump - New maintenance unit with digital pressure switch - New valve terminal - Table revised (steel) - WZW 6-fold, option 20/30-fold - Co2 extinguishing system - Warranty 12 months - Transport - IB on site - Training

Condition: good (used), ONA Poli Spark die-sinking EDM machine Type: IN 260 S2000-60A Bed: 410 x 645 mm Documentation included Crjb Exi Ejq Eh Sksdob Machine dimensions: 160x130x215 cm LxWxH Cabinet dimensions: 130x95x210 cm LxWxH Cabinet dimensions: 60x70x170 cm LxWxH

Condition: used, Year of construction: 1994, table length 750 mm table width 550 mm ampere 60 A Control Makino MGE20 x-travel 600 mm y-travel 400 mm z-travel 250 mm workpiece weight 450 kg tool change unit 8 weight of the machine ca. 5,00 t dimensions of the machine ca. 3,00 x 3,50 x H3,00 m Die-sinking machine with control MAKINO MGE20 Csb Exevxwygoi Edjrb

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. Cjb Exeuzbaysi Edsrb *

Condition: used, table length 400 mm table width 300 mm x-travel 300 mm y-travel 250 mm z-travel 250 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm Crebevwgq Sj Exi Edjb

Condition: refurbished (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 1,000 kg, quill stroke: 400 mm, workpiece length (max.): 1,000 mm, workpiece width (max.): 700 mm, workpiece height (max.): 400 mm, GF FORM 30 Sinking EDM machine Year of manufacture 2012 Travel paths (X/Y/Z): 600 x 400 x 400 mm Max. workpiece dimensions: 1000 x 700 x 400 mm Max. workpiece weight: 1000 kg Distance between table and chuck: 250 -650 mm Creb Exisvyp Sko Edob Bath height (manually adjustable): 150 - 450 mm Integrated C-axis (0-50 rpm) Max. electrode weight on chuck: 50 kg 6-way electrode changer APG FORM generator with 104 amps average discharge current Max. material removal: 1000 mm³/min Best surface: Ra 0.2 µm Machine dimensions: 2000 x 2600 x 2700 mm Total weight: 3000 kg The machine is cleaned, maintained and thoroughly tested by our technicians after receipt of the order. We would be happy to carry out a test erosion for you in our company. Optional: - Commissioning and instruction - Transport - Dielectric - Clamping device

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, MACHINE: Height: mm 2,710 Net weight: mm 3.500 HEAD: Ceb Exi Ejv N U Sbederb Electrode holder stroke: mm 400 Maximum electrode weight: kg 200 Maximum electrode weight with STATIC “C” axis: KG 50 Maximum electrode weight with DYNAMIC “C” axis: KG 12 Maximum distance between electrode holder and table: mm 600 CROSS TABLE: Longitudinal stroke X: mm 600 Transversal stroke Y: mm 400 TABLE: Battery dimensions: mm 1.100 x 800 x 450 Table dimensions: mm 800 x 600 Weight that can be supported on the table: kg 1.500 Maximum height of the dielectric: mm 420 Maximum height of the piece: mm 370

Condition: good (used), Year of construction: 2019, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, Toolmaking dissolved through company takeover Crob Exist Stwws Edjb

Condition: ready for operation (used), Year of construction: 2008, operating hours: 41,370 h, Functionality: fully functional, machine/vehicle number: 592.100.023, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, table width: 400 mm, table length: 600 mm, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-Y-Z travel paths: 350 x 250 x 300 mm X/Y axis speed: 6 m/min Z axis speed: 15 m/min Integrated C axis: ACURA-C Working area Working tank dimensions: 900 x 630 x 350 mm Dielectric unit content: 500 l Max. table dimensions: 600 x 400 mm Distance floor/table: 1,000 mm Min./Max. Distance between table and quill: 170 / 520 mm Workpiece and electrode Max. electrode weight: 50 kg Max. workpiece weight: 800 kg Max. workpiece dimensions: 820 x 580 x 250 mm Filling height: 0 - 290 mm Tool and electrode changer Electrode changer: 40 places Number of tools: 60 Generator type: ISPG Working current: max. 60 A Robot Easy ERE-009410 Base: Robot Easy UPC Max. transfer weight: 250 kg (for UPC pallets) Control: EROWA control and interface cable Control: Pneumatic chucks Gripper: RCS 5 Magazine plate: UPC with 4 positions (320 x 320 mm) Total weight: 1,500 kg Cooling Control cabinet: Integrated air/water heat exchanger Dielectric: Integrated dielectric/water heat exchanger Control Operating system: Windows XP Crob Exovxrqtji Edeb Data input: 15" LCD color screen, mouse or touchscreen Software: AGIEVISION 5 or DPControl MACHINE DETAILS System dimensions: 1,410 x 2,460 x 2,660 mm System dimensions including robot: 2,600 x 2,500 x 2,700 mm Net weight without dielectric: 3,830 kg Space requirement: 3,400 x 4,400 mm Fire extinguishing system: Automatic CO2 fire extinguishing system Form 2000 Switch-on time: 100,549 h EDM hours: 41,371 h EQUIPMENT - Automatic CO2 fire extinguishing system Form 2000 - Robot Easy ERE-009410 with EROWA control, gripper RCS 5, and magazine plate UPC - MTS Gripper Link Rapid - Integrated air/water heat exchanger and dielectric/water heat exchanger - Without magnetic table

Year of construction: 2000, Condition: ready for operation (used), General Data Machine weight 2358 kg Control Unit Brand FANUC Model Series 18i-W Main Drive Number of axis 5 Movement X-Axis Movement 520 mm X-Axis Rapid Traverse 900 mm/min Y-Axis Movement 370 mm Y-Axis Rapid Traverse 900 mm/min Z-Axis Movement 310 mm Z-Axis Rapid Traverse 900 mm/min V-Axis Movement 120 mm Crsb Exiovz Itio Edob V-Axis Rapid Traverse 450 mm/min U-Axis Movement 120 mm U-Axis Rapid Traverse 450 mm/min Workpiece Workpiece weight 1000 kg This 5-axis FANUC ROBOCUT α-1iA was manufactured in 2000. Ideal for precision cutting, this machine offers robust performance and reliability. Consider the opportunity to buy this FANUC ROBOCUT α-1iA. Contact us for more information. Application Types EDM

Condition: good (used), Year of construction: 2000, Functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total height: 220 mm, total length: 280 mm, total width: 240 mm, workpiece height (max.): 250 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, type of input current: three-phase, Agie Excellence 3, year 2000. Working machine on display at our Semsales facility in Switzerland. Csb Exiev Rgihj Edorb Machine available immediately.

Condition: refurbished (used), Year of construction: 2003, Functionality: fully functional, AGIECUT Excellence 2 Year of manufacture 2003 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Creb Exi Eovx Thmjdjb Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.1 µm Ra Max. cutting rate in cylindrical cut: 300 mm²/min Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with 4x USB connection Incl. AGIE setup 3D The machine was cleaned, overhauled and thoroughly tested by our technicians. We are also happy to offer you commissioning and training.

Condition: used, Year of construction: 1975, Technical details: table length: 430 mm table width: 270 mm x-axis: 300 mm y-axis: 240 mm z-axis: 250 mm total power requirement: 2 kVA weight of the machine ca.: 0,72 t weight: Schaltschrank: ca. 200 kg space requirements of the machine approx.: L:0,9 x B:1,0 x H:2,1 m START HOLE EROSION MACHINE - size of cooling pond: 1000 x 510 x 900mm Creb Exeu Nu Elei Edeb - incl. electric cabinet: 600 x 550 x 1400mm Machine is on sale as is, without been checked and will be sold as is! i.D. *

Condition: good (used), Year of construction: 1998, CNC die sinking machine INGERSOLL HANSEN Type: GRANTRY 1000 Year 1998 Crsb Exet Dbaksi Edob Control MITSIBISHI 64 Bit CNC multipuse Generator 70 Amp Travels : X 700 mm Y1350 mm Z500 mm work bowl : 1000 mm X1600 mm X 550 mm Table load max : 3000 Kg Cooling system , Documentation available Data backup available Accessories Tool holder Hirschmann .

Condition: used, Year of construction: 1998, table length 730 mm Cob Ejvw D Dvsxi Edsrb table width 630 mm ampere ? ( 70 ) A total power requirement ? kW weight of the machine ca. ? t dimensions of the machine ca. ? m

Year of construction: 2004, Condition: ready for operation (used), Main Drive Number of axis 5 Movement X-Axis Movement 700 Y-Axis Movement 500 Crob Esv Db E Doxi Edob Z-Axis Movement 400 U/V Movement 140 x 140 This 5-axis ONA KE 450 wire edm machine was manufactured in 2004. It offers precision and versatility for complex machining tasks. If you are looking to get high-quality EDM capabilities, consider the ONA KE 450 machine we have for sale. Contact us for more information. Application Types EDM

Condition: refurbished (used), Year of construction: 2007, operating hours: 15,125 h, Functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 200 mm, total length: 260 mm, total width: 280 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, type of input current: three-phase, overall weight: 3,300 kg, Charmilles Robofil 440SLP, 2007. Only 15,100 hours of work. Machine fully serviced and working. Viewable at our Semsales premises in Switzerland. Crob Exijv Rbxwj Edeb

Condition: used, Year of construction: 2006, Functionality: fully functional, machine/vehicle number: ATH ADV 3 with C AXIS, workpiece weight (max.): 2,000 kg, input frequency: 50 Hz, positioning accuracy: 0.005 mm, Description AGIE ADVANCE 4 Travel/ races (X/Y/Z) 550 x 350 x 400 mm Max. Workpiece dimensions 920 x 750 x 370 mm Surface support 870 x 550 mm Crjb Exev Rftlji Edsb Max. workpiece weight Workpiece weight (without bath) 2000 kg Max. electrode weight Electrode weight 80 kg Table/quill distance min. 215mm Max table/keel distance. 615mm Quill stroke 400 C-axis Integrated, 0 - 55 rpm Generator power 60 A Dielectric integrated Details • X axis:550 mm • Y axis:350 mm • Z axis:400 mm • C axis: Yes • Max workpiece length: 920 mm • Max workpiece width:750 mm • Max workpiece height: 370 mm • Max workpiece weight: 2000 kg Conditions and size • Status:Visible • Condition: Good • Length:2050mm • Width:1800mm • Height:2868 mm • Weight:4200 kg Make offer / Make offer

Year of construction: 1987, Condition: repair required (used), Die sinking machine AGIE Type:EMT 1.20 Year.1987 travels : X250 mm Y 160 mm Z 200 mm with R3 adjusting head . Cob Exisix Nqhs Edjrb Further data in the data sheet .

Condition: ready for operation (used), Year of construction: 2001, operating hours: 25,539 h, Functionality: fully functional, machine/vehicle number: 0.2633/331852, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 200 mm, total length: 800 mm, total width: 500 mm, workpiece height (max.): 200 mm, type of input current: three-phase, overall weight: 2,200 kg, table load: 500 kg, positioning accuracy: 0.005 mm, Equipment: cooling unit, documentation/manual, fridge, CHARMILLES TECHNOLOGIES from 2001 Model: ROBOFIL 290 P 0.25MM AND 0.30MM WIRE EROSION MACHINE MAKE AN OFFER TO BUY BACK Features: - Maximum part dimensions: 850 x 500 x 200 [mm] - Maximum weight: workpiece weight: 500 [kg] - X x Y x Z strokes: 400 x 250 x 200 [mm] - U x V stroke: 400 x 250 [mm] - clearance/height angle: ±30 [°] / 200 [mm] Ceb Esv Rfm Ssxi Edorb - wire diameter: 0.25 [mm] - acceptable coil types: P3 and P5 - tank capacity: 300 [l] - generator: 10 [kVA] - 400/400V isolation transformer - dimensions: 1800 x 1600 x 2130 [mm] - weight: 2200 [kg]