Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 667007, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller model: Windows Pentium, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 400 mm Z-axis: 450 mm Resolution: 0.0001 mm Tank size: 1,220 x 870 x 470 mm Working area Table dimensions: 750 × 600 mm T-slot dimensions (number): 12 mm (5 pieces) Distance between table and fixture: 150 - 600 mm Electrode and workpiece Max. electrode weight: 100 kg Max. workpiece weight: 1,600 kg Max. workpiece dimensions (W × D × H): 1,200 × 850 × 400 mm Dielectric Filter type: 8 integrated paper cartridges Creb Exjv Tnm Hji Edjb Tank capacity: 820 l Dielectric level: 145 - 440 mm (programmable) Container type: Lowerable tank Surface roughness: 0.20 µm Ra MACHINE DETAILS Weight: 4,400 kg Operating voltage: 400 V Installation dimensions: approx. 3,720 x 5,100 x 3,000 mm

Condition: used, Year of construction: 2007, Functionality: fully functional, Table area: 600 x 300 [mm] - Strokes X x Y x Z: 300 x 250 x 200 - Maximum weight per unit: 450 [kg] - Electrode diameter: 0.2 - 3 [mm] - Dimensions: 1145 x 1020 x 2270 [mm] - Creb Exiswdmucj Edjb Weight: 900 [kg]

Condition: not inspected (used), Year of construction: 2015, operating hours: 29,297 h, Functionality: unexamined, machine/vehicle number: 12212, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 2,560 mm, total length: 2,560 mm, total width: 2,950 mm, overall weight: 4,800 kg, worktable length: 1,060 mm, worktable width: 750 mm, 1/ WIRE EDM: ONA AF 35 Year of manufacture 2015 Ceb Eewfqarjxi Ederb Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with filter system, , an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine. 2/ WATER CHILLER: iC 10C Year of manufacture 2019

Year of construction: 2020, Condition: ready for operation (used), General Data Measurements width 2100 mm Measurements depth 1920 mm Measurements height 2420 mm Machine weight 3750 kg Movement X-Axis Movement 400 mm Y-Axis Movement 300 mm Z-Axis Movement 300 mm Workpiece Csb Exiovnilts Edorb Workpiece weight 1000 kg Turret Number of tool slots 3 This Mitsubishi Electric SG12M die-sinking EDM machine was manufactured in 2020. It features a robust 3750 kg weight, with a maximum workpiece weight capacity of 1000 kg. The machine includes a dielectric fluid chiller unit and a dual paper filter system, ensuring optimal operational conditions. The working tank has an automatic elevation system and hinji open-door for ease of use. If you are looking to get high-quality die-sinking capabilities, consider the Mitsubishi Electric SG12M machine we have for sale. Contact us for more information. Application Types EDM

Condition: excellent (used), MITSUBISHI MV2400S Advance Type V2 Wire EDM – Year of construction: 2016 • CNC control: Mitsubishi Advance Type V2 • Axis travels: X = 600 mm, Y = 400 mm, Z = 310 mm • Additional axes: U = ±75 mm, V = ±75 mm • Maximum workpiece dimensions: 1050 x 820 x 305 mm • Maximum workpiece weight: 800 kg • Table dimensions: 880 x 530 mm • Wire diameter: 0.05 to 0.3 mm (standard 0.25 mm) • Wire feed speed: up to 420 mm²/min • Rapid feed speed: 13 m/min • Mechanical wire tension: 0.5 to 25 N • Maximum inclination angle: ±15° (with 150 mm plate thickness) • Filtering and dielectric system: • Processing tank volume: 740 litres • Filtering flow rate: 60 L/min • Filtering accuracy: 3 µm • Filters: 2 paper filters (4 optional) • Deioniser: 10 litres, with ion exchange resin • Dielectric liquid resistivity range: from 0.5 to 100 x 10⁴ Ωcm • Power supply: • 3 phases, 200/220V, 50/60 Hz • Compressed air required: 0.5 MPa • Machine dimensions (LxWxH): 2140 x 2320 x 2150 mm • Weight: 3500 kg • Notes: Machine in perfect working order, visible in operation on request Ceb Exjwdrfyji Edjrb

Condition: good (used), Year of construction: 1997, Parts shown by hand not come. Crsb Ejpy Errjxi Edjb

Condition: refurbished (used), Year of construction: 2004, Functionality: fully functional, Robofil 240 CC Year of manufacture 2004 Charmilles Millenium control system Travel paths (X / Y / Z): 350 x 220 x 220 mm Travel paths (U / V): 350 x 220 mm Maximum taper angle: +/- 30° at 200 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.20 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2030 x 2201 x 2000 mm Total system weight: 2450 kg Cjb Exisv Tcyne Edorb The Upon receipt of order, we will clean and overhaul the machine, and test all functions. We are happy to offer the following optional services: - Transport, including loading and delivery - Commissioning of the machine at your location - Control system instruction - 6-month warranty on machine functionality - Accessories such as coolers and clamping devices

Year of construction: 2017, Condition: used, machine/vehicle number: 12652, GA No.: 592, Net weight: 14,300 kg, Travel distances (x/y/z): 2,000/1,000/800 mm, Control terminal, Control cabinet, Fire extinguishing system, Recooling system RITTAL Mini 0045TV02S273AB (Please note: Disassembly and loading will be carried out by a specialist company. By bidding on this item, the bidder accepts the additional disassembly and loading costs of €13,300.00. This additional service will be invoiced separately. The machine will only be released for collection upon payment of both invoices. The collection date will be communicated separately.) Crobsv Tv Ils Exi Edjb

Condition: used, The die sinking EDM machines of the ZNC EDM series are used in mold and tool making to reproduce injection molds or matrices with high precision and surface quality. The series is characterized by high-quality components designed for continuous operation. The models have already proven themselves many times and offer excellent performance in every size. The desired working parameters for roughing and finishing can be stored in the control, as can the desired working depth. The table is positioned manually. Creb Exi Esu Uz N Ejdjb

Year of construction: 2016, Condition: ready for operation (used), General Data Machine weight 4690 kg Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 350 mm V-Axis Movement ± 50 mm U-Axis Movement ± 50 mm Crsb Esv Ir Ahjxi Edob Workpiece Workpiece weight 1000 kg This 5-axis +GF+ Agie Charmilles CUT 30P wire EDM machine was manufactured in 2016. Ideal for precision cutting, it offers advanced control features and robust construction. Consider the opportunity to buy this +GF+ Agie Charmilles CUT 30P wire EDM machine. Contact us for more information. Application Types Cutting

Condition: good (used), Year of construction: 2002, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, table load: 750 kg, With cooler Crsb Eowcq Azjxi Edsb

Condition: good (used), Year of construction: 2004, Machine is in very good condition. Parts shown by hand not come. Csb Exi Ejvkuqtedjrb

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, The GF AgieCharmilles FORM 300, built in 2015, is a powerful and precise used die-sinking EDM machine, specially designed for demanding machining tasks in tool and mold making. Thanks to its modern control system, excellent surface quality, and high efficiency, it offers an excellent investment opportunity for companies that value precision and cost-effectiveness. Key Features & Benefits: ✅ Large work area & high load capacity: Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Maximum workpiece weight: 1600 kg Maximum electrode weight: 50 kg ✅ High-precision machining with state-of-the-art technology: Positioning accuracy thanks to linear glass scales (no recalibration required) Crjb Exiev Tcnrj Edjb Innovative ISPG (Intelligent Speed Power Generator) for maximum efficiency Adaptive control (ACC & ACO) for optimized spark discharge and reduced electrode wear Surface quality up to Ra 0.08 µm ✅ Powerful control & automation: AC FORM HMI with intuitive user interface & touchscreen Automatic CAD/CAM linking for seamless data transfer Job management with prioritization and Real-time monitoring Remote monitoring via SMS notification ✅ Maximum productivity & flexibility: Automatic 48-station electrode changer for unattended machining Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology ✅ Reliability & low operating costs: Robust C-construction with high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with low maintenance requirements Ideal for: ✔ High-precision mold and tool machining ✔ Series production with the highest quality requirements ✔ Complex geometries and fine surface structures Experience maximum productivity with the GF AgieCharmilles FORM 300 – your solution for precise and economical die-sinking EDM! 📌 Our used machine, built in 2015, is cleaned, overhauled, and comprehensively tested before sale to ensure the highest quality and reliability.

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,400 mm, total width: 2,160 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 5,440 kg, table length: 950 mm, net weight: 4,440 kg, feed rate X-axis: 3 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 3 m/min, table load: 1,000 kg, input voltage: 380 V, tank capacity: 1,000 l, Equipment: cooling unit, documentation/manual, fridge, Wire EDM Machine Manufacturer: GF Machining Solutions Model: CUT E 600 Year of Manufacture: 2016 Crsb Exi Eou Hp Atjdjb Travels: X / Y / Z: 600 / 400 / 350 (mm) Extras: 25kg spools Condition: Very good and well-maintained condition Payment Terms: 100% before disassembly and loading We are a tool shop and are downsizing our production. We purchased the machine new in 2016 and it has been in use ever since. The machine is powered and continues to be in use. A viewing and test run are available. The machine can be handed over at short notice upon request. With a purchase, we can also offer the following: - Training your staff - Cleaning the machine - Installing transport restraints - Loading onto the truck - Transporting with our own truck - Unloading at your location - Moving the machine to your site - Aligning the machine - Connecting and commissioning

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 253, GF Agie Charmilles, type: Agie Cut Evolution 3, CNC wire cutting machine 9KVAX50H3, serial no. 253 (2002) (GW 4400kg) Complete with power cabinet and accessories. Cjb Exiowcld Ho Edsrb

Year of construction: 2008, Condition: ready for operation (used), Control Unit Brand FANUC Ceb Exi Eov Rr Rdedorb Model 310is-WA Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 310 mm V-Axis Movement 200 mm U-Axis Movement 200 mm Workpiece Workpiece X 1050 mm Workpiece Y 775 mmm Workpiece Z 300 mm Additional Equipment Includes all accessories in the photos Includes digital documentation This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information. Application Types EDM

Condition: excellent (used), Year of construction: 1996, Control: CNC path control incl. screen ZIMMER + KREIM TECHNICAL DATA Traversing range X-axis 570 mm Y-axis 400 mm Z-axis 415 mm C-axis 360 Resolution X, Y, Z 0.001 mm C 0,001 angular degree table clamping area 840 x 600 mm Dielectric over table 360 mm 4 T-slots 10 mm table load max. 1000 kg Distance table - quill 620 mm Automatic electrode changer Number of electrodes 50 Electrode weight - without rotation 100 kg Electrode weight - with rotation 15 kg Rapid traverse 800 mm/min EQUIPMENT/ACCESSORIES Pallet changer 6-fold Automatic electrode changer 50-fold C-axis ADAPTI MAT 04 - monitoring and regulation device PEG 90 - generator chuck EROWA IST with 3 receptacles Machine light Electronic handwheel Crjb Exi Eehq A T Aodsb Cooling unit for dielectric Automatic CO2 extinguishing system C-Box Zimmer + Kreim Purge distributor 14-fold Purge volume controller 15-fold 1 pallet pick-up system UPC 2 pallets Set-up elements Documentation

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 399, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 400 kg, total height: 2,603 mm, total width: 1,855 mm, total length: 2,689 mm, Machine is still in use. Travel: 350x250x350 Year of manufacture: 2007 See pictures for further technical specifications. Remarks: - The price does NOT include any accessories! - Pickup by buyer, from the site. - Pickup date will be agreed upon by the seller. Crobjwcduks Exi Edjb - No warranty. - Advance payment (invoice) or cash upon pickup.

Condition: refurbished (used), Year of construction: 2011, Functionality: fully functional, The GF AgieCharmilles CUT 30P, built in 2011, is a powerful and precise used wire EDM machine specifically designed for demanding machining applications in the metalworking industry. Thanks to state-of-the-art technology and intelligent control, the CUT 30P offers the highest cutting quality, low maintenance requirements, and an excellent return on investment. Main Features & Benefits: ✅ Large work area: Workpiece size: max. 1050 x 800 x 350 mm Maximum workpiece weight: 1000 kg Travel paths: X/Y/Z: 600 x 400 x 350 mm U/V: ± 50 mm Conical machining up to ± 25° / 80 mm ✅ High-precision machining: Positioning accuracy thanks to glass scales Automatic wire tensioning for consistently precise cutting results Surface quality up to Ra < 0.25 µm ✅ Efficient wire system: Wire diameter: 0.15 – 0.30 mm Crob Exsv S Ua Dji Edob Automatic wire feeding and rethreading 25 kg wire spool for long operating times ✅ Intelligent control & user-friendliness: Windows-based control with intuitive user interface 15" LCD display for easy programming DXF import & 3D graphic check for precise simulations ✅ Reliability & low operating costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs thanks to robust construction and durable wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool & mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT 30P – The perfect choice for precise and economical wire EDM! 📌 Our used machine, built in 2011, is cleaned, overhauled, and comprehensively tested before sale to ensure the highest quality and reliability. 📩 Contact us for a customized quote or demonstration! We are also happy to offer commissioning and training on the machine.

Condition: good (used), Year of construction: 2004, A well-maintained AgieCharmilles star hole drilling machine that operates reliably. Ceb Exeu Tvikoi Edjrb Control unit: VDF monitor All travel speeds and the high-pressure pump can be controlled via the interface keyboard. Technical specifications: Travel range X 300 mm, Y 200 mm, Z 300 mm, auxiliary axis (manual) 100 mm Bore diameter range 0.3-3 mm Maximum depth 200 mm Worktable: Dimensions 500 mm x 300 mm Maximum workpiece weight 300 kg Water tank: Tank volume 10 l Machine specifications: Dimensions 1,340 mm x 900 mm x 1,940 mm Total weight 1,200 kg Power supply: 400 V, 50 Hz, 4 kVA

Condition: excellent (used), Year of construction: 2020, operating hours: 3,339 h, Functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total height: 2,645 mm, total length: 2,870 mm, total width: 2,670 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,450 mm, workpiece length (max.): 950 mm, overall weight: 6,300 kg, For sale is a CUT P 800 wire erosion machine Crjb Exiou Ic Nio Edjb incl. options: Wire guides 0.25 mm AC-Setup 3D Taper-Expert © 0.25 mm Horizontal manual annealing Additional M-functions Signal light - operating status display Automatic central lubrication

Year of construction: 2007, Condition: ready for operation (used), Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 256 mm V-Axis Movement +/- 70 mm U-Axis Movement +/- 70 mm Workpiece Workpiece weight 200/450 kg Additional Equipment Wire leveling tool with the machine Beams for the table Complete documentation This 5-axis AgieCharmilles Classic V2 wire EDM machine was manufactured in 2007. It features a travel range of X-350 mm, Y-250 mm, Z-256 mm, and U/V +/- 70 mm. Capable of handling workpieces up to 750 x 550 x 250 mm and a maximum weight of 200/450 kg, it includes automatic threading, wire leveling tool, beams for the table, and CAM Peps software. Complete documentation is available. For more information about this wire EDM machine, please reach out to us. Cobeumyq To Exi Ederb Application Types EDM

Condition: good (used), Year of construction: 2006, General Data Measurements width 2610 Measurements depth 3270 Measurements height 2240 Machine weight 2600 Control Unit Brand FANUC Model System 16-WB Main Drive Max taper angle ± 30 degrees/80 mm (option ± 45 degrees/40 mm) Number of axis 5 Movement X-Axis Movement 520 mm Y-Axis Movement 370 mm Z-Axis Movement 300 mm (275 mm in water bath) U-Axis Movement ± 60 mm W-Axis Movement ± 60 mm Workpiece Workpiece X 790 mm Workpiece Y 730 mm Workpiece Z 275 mm Workpiece weight 650 kg (with coaxial spindle), 450 kg (with water bath) Table Outer length 750 mm Ceb Exisu Nhu Ts Edjrb Outer width 590 mm Additional Equipment Bedra wire unwinding device BAS 45/100E (to the left of the machine), capable of handling wire spools weighing up to 45 kg It features a coordinate travel of 520 x 370 mm on the X and Y axes, and a Z-axis adjustment of 300 mm. The machine can handle a maximum workpiece weight of 650 kg and offers a rapid traverse of 900 mm/min. Ideal for precision erosion tasks, the FANUC Robocut Alpha 1C machine we have for sale. Contact us for further details regarding this erosion machine.

Condition: used, Year of construction: 2013, Wire erosion / EDM Travel distance X: 500 mm Travel distanceY :350 mm Travel distance z: 256 mm max. workpiece size X: 1050 mm max. workpiece size Y: 650 mm max. workpiece size Z: 250 mm max. workpiece weight: 400 kg with AWF ( Automatic Wire Feeding ) U / V axis: +/- 70 mm submerged cooling unit Maximum inclination angle/height: 30° / 100 mm Crsb Exjv R S Trsi Edjb Wire spool weight: 25 kg

Year of construction: 2014, operating hours: 9,111 h, Condition: ready for operation (used), General Data Machine weight 7200 kg Control Unit Model PIVIC-System Main Drive Number of spindles 1 Spindle speed range 4500 rpm Number of axis 6 Cob Exsuwypfsi Edsrb Movement X-Axis Movement 520 mm Y-Axis Movement 970 mm Z-Axis Movement 420 mm A-Axis Movement 360° B-Axis Movement ±20° E_(Distance_table/ram) Movement 210° Additional Equipment Coolant tank capacity: 310 l This 6-axis VOLLMER QXD 250 was manufactured in 2014 and is a Disk erosion machine for complete machining of PCD-tipped tools. It features a robust VOLLMER PIVIC-System control, with a main spindle speed of 4500 rpm and torque of 6 Nm. The machine can handle workpieces up to 320 mm in diameter and 250 mm in length. With 9111 working hours, the VOLLMER QXD 250 machine we have for sale represents a significant opportunity. Contact us for further details. Application Types EDM