Condition: used, Year of construction: 1999, Diesinking / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 300 mm table size X: 550 mm table size Y: 470 mm max. workpiece size X: 700 mm max. workpiece size Y: 500 mm max. workpiece size Z: 250 mm Djdpfx Aozguidsm Tokp max. electrode weight: 50 kg max. workpiece weight: 500 kg electrode changer: 20 - time generator: 50 Ampere drop tank Control CNC control: Mitsubishi 32-bit EDM control

Condition: excellent (used), Hallo, Wir bieten hier kurzen Erowa Kontrolldorn kurz an. ER-008617. Mit diesem lässt sich der Rundlauf und die Achse ausrichten.Passend für Spannfutter 50 +100. Dkodpfx Ajiqunwom Tjp Bei Rückfragen stehen wir gerne zur Verfügung .

Condition: good (used),

Condition: excellent (used), Hello, we offer used Erowa PalletSetW vices. They have been cleaned and checked by us. Dkodpsitcq Tjfx Am Tep ER-025895 Vice PalletSet W 40mm ER-054922 flat vise 8mm PalletSet W ER-055774 Vice 0-170mm In addition, a functional test was carried out. The vices have slight signs of wear and are technically in very good condition. Individual purchase also possible. Spare parts are also available Do you have any questions? Then we are at your disposal.

Condition: ready for operation (used),

Condition: new,

Condition: good (used), Good day, we offer here used clamping devices from Erowa. These belong to the PalletSet W and are for Wire EDM machining. The following parts are available: Fixed holder ER-030678 Floating holder 3D ER-030923 They have been cleaned and tested by us. In addition, a functional test was carried out. The clamping devices have slight traces of use, and are technically in a very good condition. Individual acceptance also possible. Spare parts are available. Do you have any questions? Then we are at your disposal. Dkodpsp Eb Dvsfx Am Top

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control system: Mitsubishi - 64-bit CNC Generator power: 70 Amps - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up disc changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64-bit, manufactured in 2006, has undergone a comprehensive and professional overhaul in our facility and is in very good technical and visual condition. During the overhaul, the machine was disassembled to over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the machine mentioned above: Replacement of the ball screw drive and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screw drives of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to the OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Dksdpfjzgckvsx Am Tjp Cleaning of the entire working tank including replacement of the felt wipers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and the control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. The machine is immediately ready for use and is ideally suited for reliable production operation.

Condition: used, Year of construction: 1994, table length 750 mm table width 550 mm ampere 60 A Control Makino MGE20 Dodpjvxwygjfx Am Tskp x-travel 600 mm y-travel 400 mm z-travel 250 mm workpiece weight 450 kg tool change unit 8 weight of the machine ca. 5,00 t dimensions of the machine ca. 3,00 x 3,50 x H3,00 m Die-sinking machine with control MAKINO MGE20

Condition: ready for operation (used), Year of construction: 2017, operating hours: 28,500 h, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, overall weight: 2,700 kg, controller manufacturer: MITSUBISHI, controller model: D-CUBES, number of axes: 5, wire diameter (min.): 0.1 mm, This Mitsubishi MV1200S wire EDM machine was manufactured in 2017. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 220 mm. The machine is equipped with automatic wire threading and the Mitsubishi D-CUBES control system, ensuring efficient and stable production. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200S machine we have for sale. Contact us for further details. • Control: Mitsubishi D-CUBES • Automatic wire threading: Yes • U/V travel: 120 / 120 mm • Maximum workpiece dimensions: 810 x 700 x 200 mm • Maximum taper angle: ±30° @ 87 mm, ±15° @ 200 mm Djdpfxszgg S Re Am Tjkp • Condition: Regularly used and well maintained; very good technical condition • Operating hours: approx. 28,500 h • Inspection: Machine can be inspected under power • Documentation: Available

Year of construction: 2003, condition: good (used), EDM machine Machine type: OPS Ingersoll Gantry 5000 Year: 2003 SPECIFICATIONS Dkedpfezi Sfujx Am Tjp Travel

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 3,000 mm, total width: 2,300 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Dsdpfx Amjzhvhwe Tjkp Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servo motors Glass scales in X and Y axes Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15“ TFT touch screen monitor Handheld remote control Automatic wire threading with thermal wire cutting, Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 230 x 300 x 200 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: € 2,000.00 Commissioning, price based on effort Basic training, price based on effort

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 3,000 mm, total width: 2,300 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servo motors Glass scales in X and Y axes Dksdezhvhdspfx Am Top Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15” TFT monitor Handheld remote control Automatic wire threading with thermal wire cutting Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English A horizontal rotary axis (6th axis) is included. This was removed due to lack of need and was not in use. Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 230 x 300 x 200 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: €2,000.00 Commissioning, price based on effort Basic training, price based on effort

Condition: used, Year of construction: 2008, functionality: unexamined, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, For sale: a Mitsubishi FA30S wire erosion machine. Travel ranges (X, Y, Z): 750 × 500 × 410 mm Max. workpiece dimensions: Up to 1300 × 1000 × 405 mm Dsdjziw Saepfx Am Tokp Max. workpiece weight: Up to 3000 kg The machine has a Z-axis extension, allowing cutting up to 600 mm. Original price in 2008: 238,259.00 Loading with a forklift is possible.

Year of construction: 2005, condition: ready for operation (used), A Sodick CNC wire EDM machine is available. Travel X/Y/Z: 750mm/500mm/400mm, travel U/V: 770mm/520mm, max. workpiece dimensions X/Y/Z: 1050mm/750mm/400mm, max. workpiece weight: 1500kg, wire diameter range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 2100mm/2800mm/2350mm, weight: approx. 5300kg. Documentation available. An on-site inspection is possible. Dkedpfxjzi Ei Hs Am Tsp

Condition: like new (used), Year of construction: 2017, operating hours: 9,830 h, The machine is like new. Dkjdpfxjziyv Ue Am Tsp

Condition: used, This Dieter Hansen erosion machine, type 750 B, will be auctioned off in our industrial auction / machine auction Kusch+Co GmbH - paint booths - milling and drilling machines - industrial sewing machines - grinding machines - workshop and office equipment, online. You can find this and many other items on our platform. Dkjdpfezfiazox Am Tsp

Condition: not inspected (used), Year of construction: 1978, functionality: unexamined, X travel: 300 mm, Y travel: 150 mm, Dksdpfswrp Eyox Am Tsp Z travel: 200 mm, Table dimensions: 350 × 450 mm, Weight: approx. 1.4 t, Machine condition unknown,

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, controller model: Mitsubishi 32-bit EDM Steuerung, TECHNICAL DETAILS Travel range X-axis: 400 mm Travel range Y-axis: 300 mm Travel range Z-axis: 300 mm Max. workpiece size X: 700 mm Max. workpiece size Y: 500 mm Max. workpiece size Z: 250 mm Max. electrode weight: 50 kg Max. workpiece weight: 500 kg Table size X: 550 mm Table size Y: 470 mm Dkodpfjzapyljx Am Top MACHINE DETAILS Control: Mitsubishi 32-bit EDM control Electrode changer: 20-position Generator: 50 A EQUIPMENT Lowerable container

Condition: excellent (used), Year of construction: 2016, X-axis: 1,000 mm Y-axis: 1,510 mm Z-axis: 700 mm Max. workpiece dimensions: 1,770 x 1,270 x 650 mm Max. workpiece weight: 7,500 kg Connected load: 22 kVA Machine weight: 12,500 kg Includes multi-change electrode changer, 142 positions. Dkedpfx Aszcpltom Tep Includes documentation. Machine is available immediately and can be inspected while powered on!

Condition: excellent (used), Year of construction: 2016, X-axis: 550 mm Y-axis: 350 mm Z-axis: 400 mm Max. workpiece dimensions: 1,200 x 700 x 400 mm Max. workpiece weight: 1,500 kg Machine weight: 2,850 kg Cutting range: 30 degrees on 400 mm Includes operating manual. Machine can be inspected while powered on. Dkjdpfozcpifjx Am Top

Condition: used, Year of construction: 2007, table length 500 mm table width 350 mm ampere 65 A Control AGIEVISION 5 CNC total power requirement 20 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire 60 – 300 mm/s. Total electrical load, approx. 20 kW - 400 V - 50 Hz Weight, approx. 4,000 kg Dimensions of machine approx. 2.4 x 2.2 x 2.4 m Accessories / Special Features • AGIEVISION 5 CNC Path Control for 5 Axis with OS 2 Machining Version and With various subprogrammes for a easier and faster designing of machining programmes, Technology devices, PP 123 Agie Geometric helps, DNC-Connection,Graficheck in 2 D a. 3 D, Rethreading of wire when wire is cutted-off, Optimizing the programmed pathes, PURECUT for reduction of Oxidation on workpiece surface,10 various program-languages, and many more features. • Mobile electronic hand held control unit for manual adjustments and set-ups for new workpieces, and separate standing control panel with CD-recorder and large monitor. • “DA” PROGRESS integrated Dieelectricum Aggregate with chiller and Dkjdpst Hxbkjfx Am Top Filtering System, large tank incorporated in machine’s basement, Koax flushing, • AGIE Generator with 65 A Capacity and cutting performance up to 300/450 mm² • AGIE Automatic Wire Threading System with wire shredder and container mounted in backside of machine. Condition : Very good. The machine comes from a first class tool and die shop. It has been kept in very good order and was regularly maintained. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, GF Charmilles EDM FO 550 Sp c/w ATC 16 - 2 units Year 2010 Djdpfjx Hp Ukox Am Tskp c/w RTC 16 (Robot Tool Change) X-Axis Travel 600mm Y-Axis Travel 400mm Z-Axis Travel 450mm Control Charmilles Touch Tool Changer - RTC16 Power Source 64 AMP C-Axis - Yes Chuck System 3R Cheap Sales

Year of construction: 1989, condition: good (used), Selling 2 sinker EDM machines. Complete with filtration, rotary table, tooling, and fume extraction system. Dodpfxshgrnhj Am Tjkp

Condition: excellent (used), Year of construction: 2014, functionality: limited functionality, X-axis: 400 mm Y-axis: 300 mm Dkodpoyvtbysfx Am Tep Z-axis: 220 mm The machine was in daily use until mid-April; however, the "automatic threading" function is not working.