Used extraction systems / industrial extractors for sale (38)

Year of construction: 2024, condition: used, functionality: fully functional, Exhaust hood M4000 Technical specifications for each exhaust hood: Working width 4,000 mm Working height 3,000 mm Overall width 4,050 mm Overall height 3,050 mm Dodpfx Aie Ahmwyezocp Overall depth 750 mm Airflow rate 15,000 m³/h Fan 2 units, Atex Motor 2 x 3.6 kW, with Ex protection Scope of supply for the exhaust hood: 1 Exhaust hood housing, consisting of modules, entirely made of galvanized sheet metal 1 Set of labyrinthine pre-filters made of paper 1 Set of filter mounting frames with filter material made of glass fiber 2 Radial fans with spark protection, Ex protection

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-format, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss surfaces. It is currently still fully assembled and installed. This allows interested parties to inspect the existing scope of the system and the installation situation before dismantling and to document it for a later reconstruction. Technical data and equipment: • Large-area, filtered supply air ceiling panel, approx. 8,100 × 4,500 mm • Filter ceiling divided into two areas across its width • Large-area floor extraction system, approx. 8,100 × 3,650 mm, with grating • Supply air treatment, approx. 24,500 m³/h • Exhaust air treatment, approx. 24,000 m³/h • Supply and exhaust air fans / air treatment • Existing heating / hot water system with pumps and fittings • Air ducts and existing piping • Electrical system control / control cabinet • Cabin lighting • Sale includes the system in its current, on-site configuration Condition and use: Used, condition appropriate for its age. The system was in regular production use until recently. Previous use included high-quality surface work up to and including high-gloss coatings. An inspection of the still-assembled system is highly recommended. Sales and dismantling conditions: Dcsdpfxjz Ikyrs Aizop Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading, and transport are the complete responsibility of the buyer and will be carried out at the buyer's expense. The buyer must organize the necessary specialist personnel as well as lifting, dismantling, and transport equipment. The complete dismantling and removal must be completed no later than July 31, 2027. Note: Technical specifications have been compiled based on available documentation, nameplates, and the current condition of the system. Specifications are without guarantee. The condition and scope determined during inspection shall be binding. Selling price: 19,500.00 EUR Price is net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: used, Radial fan REITZ, Type: MAE Manufacturer's No. 601475, Year of manufacture 2017 Dodpfx Ae Ah Ig Djizscp Volume flow rate 4260 m³/h = 71 m³/min. Pressure p 1.2 kg/m³ Air inlet Ø 250 mm (flange diameter in the base plate) Air outlet 245 x 195 mm Motor speed 2915 rpm Motor power 7.5 kW Mains connection 400 Volts 50 Hz - Fan impeller with 9 fan blades - Directly flanged drive motor - Flange dimensions for air outlet 310 x 260 mm - Sturdy metal housing made of 5 and 6 mm steel Space requirement L x W x H 1390 x 1030 x 600 mm Weight of radial fan 200 kg Very good condition, only test run completed.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Stationary dust extraction unit Manufacturer: TEKA Model: Deltar Operating hours: 2234 Airflow rate: 5000 m³/h Max. static pressure: 3000 Pa Rated current: 8.5 A Frequency: 50 Hz Control voltage: 24 V Connection voltage: 400 V Protection class: IP 54 Power supply: 3-phase + N + PE Weight: 350 kg Motor power: 4 kW Dedpfx Aij Ahnaqozocp

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: lighting, For sale: a BUMEX brand dry paint booth, model TUXXYY, manufactured in 2019 and in perfect working order. This booth is designed for the application of lacquers and paints, both water-based and solvent-based, and complies with all European safety and quality regulations. It is the ideal solution for automotive workshops, metalworking shops, or any industry requiring a professional and safe finish. It includes complete technical documentation (installation, safety, and maintenance manual) and a delivery protocol. Key technical features: - Brand: BUMEX (F.H.U.) - Model: TUXXYY (Dry paint booth) - Year of manufacture: 2019 - Total power: 2.0 - 3.5 kW - Supply voltage: 230/400 V (50 Hz) – Single-phase and three-phase - Protection rating: IP-65 (IP-56 in control cabinet) - Filtration system: Double-stage with Andrea paper filter and G4 fiber filter (PaintStop). - Extraction fan: Included for removing excess paint. - Construction: Galvanized sheet metal (stainless steel option available). - Regulatory compliance: ISO 9001:2015 certified, CE marking. - Applicable standards: PN-EN 12215, PN-EN 60204-1, PN-EN 1127-1 (safety in explosive atmospheres). Condition and maintenance: - Condition: Excellent condition. Operation verified. - Maintenance: Preventive maintenance has been performed according to the manufacturer's instructions (filter and electrical connection inspection). - Includes: Original documentation (Instruction Manual, Delivery Protocol), filters Djdpfjz Riuzex Aizecp Important notes (according to the manual): - Requires installation in a location with adequate ventilation, a minimum temperature of +10°C, and effective grounding. - Designed for use in Zone 2 (potentially explosive atmospheres), complying with the required safety measures.

Year of construction: 2022, operating hours: 2,000 h, condition: like new (used), functionality: fully functional, We offer this like-new Ulmatec filter unit, model FES 20-35-4, for dry dust extraction of aluminum/plastic, manufactured in 2022. Manufacturer: Ulmatec Model: Filter unit FES 20-35-4 Year of manufacture: 2022 Condition: like new Type: Dry dust extraction for aluminum/plastic Category No.: 376 If you have any questions or require further information, please send us a message or call us. Dcsdpfx Aiszlr Dcezep

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Dcedpfx Aovvcqxeizop Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total width: 2,490 mm, total height: 2,700 mm, The M.A.L. Mechatronic industrial vacuum cleaner is a mobile, high-performance suction and recovery system for abrasive blasting media and industrial waste. The system operates with a powerful vacuum technology, generating up to 650 mbar of negative pressure, and achieves air flow rates of up to 5,700 m³/h. The integrated H13 filter technology with a separation efficiency of 99.995% ensures the safe removal of even the finest dust particles. The robust steel frame construction allows for use under demanding industrial conditions. The system is particularly suitable for blasting and surface treatment processes where abrasive blasting media should be economically recovered and reused. Immediate purchase possible. Dcodpfx Aiozarwgozep Rental available, daily or monthly, upon request.

Year of construction: 2012, condition: excellent (used), Dust extraction system with Venturi wet separator Dcsdj Afbp Eopfx Aizop • Manufacturer: Keller Lufttechnik • Type: VDN-E-3.6-Z5.5 • Year of manufacture: 2012 • Serial number: 1029002 1 1 • Includes accessories: Disposal bucket • Condition: Unknown Operating flow rate: 3,600 mm Drive power: 5.5 kW Water capacity: 440 l Diameter: 894 Height: 2,725 mm

Condition: good (used), Year of construction: 1985, total height: 2,000 mm, overall weight: 150 kg, total length: 1,300 mm, total width: 1,000 mm, inner dimension height: 950 mm, inner dimension width: 900 mm, inner dimension length: 1,100 mm, Paint spray booth for small parts / color samples, exhaust air volume 3100 m3/h, motor 0.75 KWDimensions 1000x1300x2000 mm, approx. 150 kg Dcsdpfx Aievl H Sfezep

Condition: used, machine/vehicle number: 0940, without hall piping Djdpfx Aijrz Iq Hozjcp

Condition: used, Year of construction: 2004, functionality: fully functional, The machine is used, but in good condition. It can be inspected while in operation. Dcedpfx Aozp Ik Tjizep

Condition: excellent (used), The VAC-7HS abrasive recovery system is an electrically powered vacuum abrasive recovery system specifically designed for use with mineral abrasives, which typically generate more dust. The VAC-7HS abrasive recovery system is equipped with a particularly powerful side-channel blower, an integrated, high-performance cartridge filter with pulse-jet cleaning, a separate dust pre-separator SC-500 with manual emptying, and a 0.3 m3 open-air filter. It also includes a stationary storage silo for manual refilling of the blasting pot (manual shut-off valve), a bottom hopper, and suction hoses. The VAC-7HS abrasive recovery system can be used universally for recycling for further reuse or for a big bag filling station for the disposal of the mineral abrasive. Dodpfx Aiszarybjzecp

Condition: good (used), Filter system, clean air filter, fine filter, filter, compact filter, HEPA filter, filter cassette -Manufacturer: Filt Air, Air filter type GT4-13AE-YACO -Front frame dimensions: 1210 x 600 mm, see photo of the type plate -Connection: Ø 255 mm -Quantity: 1x air filter included -Dimensions: 1210/130/H600 mm Dcodjz N Hncspfx Aizjp -Weight: 16 kg

Condition: good (used), Filter system, clean air filter, fine filter, filter, compact filter, particulate filter, filter cassette Djdpew U N Tuofx Aizscp -Manufacturer: AAF International, air filter type AstroCel ® II -Part No: 12-1210-0205 -Front frame dimensions: 570x1170x110 mm, see photo type plate -Number: 3x air filters available -Price: per piece -Dimensions: 1170/110/H570 mm -Weight: 11 kg/piece

Condition: used, Filter system, clean air filter, fine filter, filter, compact filter, HEPA filter, filter cassette -Handover: in its current condition as inspected -Filter: slightly damaged, see photos -Manufacturer: Filt Air, Air filter type GT4-13AE-YACO Dsdpoz Ahkajfx Aizecp -Front frame dimensions: 1210 x 600 mm, see photo of the type plate -Connection: Ø 205 mm -Quantity: 1x air filter included -Dimensions: 1210/130/H600 mm -Weight: 16 kg

Condition: used, functionality: fully functional, Automatic dosing device for coating the filter plates with dry additive or for applying a filter aid layer. Djdpfxswvh A Es Aizjcp

Condition: good (used), Filter system, clean air filter, fine filter, filter, compact filter, particulate filter, filter cassette Dcjdpfstpyq Uox Aizsp -Manufacturer: Filt Air, air filter type GT4-13AE-YBCO -Front frame dimensions: 1210 x 600 mm, see photo nameplate -Connection: Ø 230/250 mm -Number: 20x air filters available -Price: per piece -Dimensions: 1210/190/H600 mm -Weight: 16 kg/piece

Condition: good (used), Year of construction: 1993, Offer 24299 Technical data: - Volume flow approx. 2170 m³/h. - Dust bag / chip bag up to 170 L - Connection spigot 160 mm - Connection spigot adapter 2 x 100 mm - Drive power 400 V / 2.2 kW - Space requirement W 1200 x H 1900 x D 550 mm - Weight approx. 85 kg Dcsdpfet Hurxjx Aizjp

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Dcedpfew Ivp Nex Aizop

Condition: good (used), 210140 Surface Filter VARIO 4 – P, with cleaning control, without switchgear and control unit ex works. Price: on request + VAT (condition as illustrated in the photo). Incl. pre-separator. Motor power: 22 kW, 400 V, 50 Hz. Airflow: approx. 10,000 m³/h – 12,000 m³/h. Disposal: 3 x 50 L disposable containers. Subject to prior sale! Dsdjy It Azepfx Aizscp

Condition: good (used), 210138 Surface Filter UNI STAR X, with factory-installed control and switching unit. Price: on request + VAT (condition as shown in the photo). Motor power: 3.3 kW, 400 V, 50 Hz. Air flow rate: approx. 1,500 - 2,500 m³/h Disposal: 2 x 30 L disposable containers. Subject to prior sale! Dcodpfoy It Eiox Aizjp

Condition: good (used), 210137 Surface filter VARIO 2.3, with factory-installed switching and control unit. Price: on request + VAT (condition as shown in the photo). Motor power: 11 kW, 400 V, 50 Hz. Airflow: approx. 5,000 m³/h at 4,800 Pa. Disposal: single hopper support; 200 L lidded drum with pneumatic docking device. Subject to prior sale! Dcjdpfx Ajy It Dreizsp

Condition: new, functionality: fully functional, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-FLOW DESK Standard – 1000S – 1700 m³/h Extraction table, suitable for gluing, sanding, polishing, welding, or manual cutting. The ISI Flow Desk 1000 S extraction table is a simple standard workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Possible extraction capacity: 1700 m³/h Work surface W/D in mm: W 980 / D 960 Work height in mm: H 638-938 mm Table load: 150 kg/m (wood, with evenly distributed load) Dsdpjzdtqusfx Aizjcp Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1076 / D 1000 / H 938 (other lengths and depths available as options) Fan capacity: without fan Pipe connection: D=161 mm Color: RAL 7042/RAL 7011 Weight: 100 kg Application: The workbench is used for extracting non-explosive, dry dust and gases. It can be used as a gluing, sanding, polishing, welding, or manual cutting table. Your advantages of the ISI – Flow Desk series: - 8 device variants available - Simple connection to extraction system via nozzle at the end of the table - The design of the table allows working from 3 sides - Height adjustment - Wide range of assembly and connection accessories - Quality Made in Europe The ISI Air extraction table must not be used in conjunction with ATEX zones.

Condition: new, functionality: fully functional, total height: 1,640 mm, total length: 1,400 mm, total width: 1,100 mm, overall weight: 267 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 1000VH – 960 m³/h – 400 V Extraction table, welding and grinding table. Extraction table with a 1.1 kW fan, filter cartridge, and wooden slats, as well as a rear wall with extraction and a ceiling and side walls without insulation. The extraction table with automatic compressed air cleaning filter and integrated fan for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Extraction capacity: 960 m³/h Dust class: M Working area W/D in mm: W 892 / D 765 Working height in mm: H 690 - 924 Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1400* / D 1100 / H 1640 (optional L = 1500/2000 mm available) Compressed air connection: Yes, min. 5.5 - max. 6.0 bar (for filter cleaning) Fan power: 1.1 kW Operating voltage: 3 x 400 V, 50 Hz, 2-pole Noise level*: 65 db(A) without cleaning / 85 db(A) without cleaning Pipe connection: D = 250 mm Color: RAL 7042/RAL 7011 Weight: 267 kg * With fan and nozzle Application: The extraction table with a fan is used to separate dust and welding fumes from the process air. Suitable for work where vapors and dust are generated, such as welding, grinding, etc. Your advantages of the ISI-Flow Desk series: Dcjdpezdty Njfx Aizsp - 12 device variants available - Filtration with compressed air-cleaned filter cartridge according to dust class M - Automatic filter cleaning by pressing a button on the front - Differential pressure gauge for easy monitoring of the cleaning requirement - Integrated, energy-efficient fan 3x400V, 50 Hz, 2-pole; closed fan blades, backward-curved, self-cleaning impellers; ISO 14694 (BV3 G 6.3) balanced - Rear wall, side walls, and ceiling ensure effective extraction and holistic air flow - Height-adjustable work table - Wide range of mounting and connection accessories - Quality Made in Europe For safe, effective air flow from extraction to exhaust. The ISI Air extraction table must not be used in conjunction with ATEX zones. The images may contain accessories.