KGT Kool Graphic Trade BV

Year of construction: 2004, Condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, gauzing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit Kelhcowmb I Ajdwzslt - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2014, Offset 4 color KBA Rapida 105-4 Year: 2014 Kljlhcdswhur Rowzst Number of impressions (mio): 110 Machine control - CleanTronic washing system - ErgoTronic Console - ErgoTronic ColorDrive Feeder - Suction belts in feeder - Steel plate in feeder Printing units - Number of printing unit(s): 4 - PWHA Semi Automatic Plate Change - Varidamp dampening - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening cooling and circulation system: Technotrans - Ink temperature control: Technotrans beta.c Delivery - Standard delivery - Powder spray Accessories - Cabinets air cooled Max. output (s/h): 16000 Max. sheet size (mm): 720 x 1050 Min. sheet size (mm): 360 x 520 Min. paper thickness (mm): 0,06 Max. paper thickness (mm): 0,7

Condition: used, Year of construction: 2017, Foil wrapping machine Sitma WM 60 Year: 2017 The new automatic intermittent motion side seal machine is equipped with infeed conveyor, shrink tunnel and delivery conveyor Description: - Semi automatic setting - Colour monitor with touchscreen - Straight infeed - Foil unit Kljlhcowhi Iysdwzjt - Shrink tunnel Specifications: Sitma WM 60 - Packaging possibilities Min./Max. Length: 100 • 420 mm. Min./Max. Width: 75 -420 mm. Min./Max Height: 1-200 mm. Min./Max width of micro-perforated single fold film: 155 • 655 mm. Max. mechanical speed: up to 3,600 cycles per hour

Condition: used, Punching machine Rilecart F-800 Including various punching tools - Maximum punching length: 800 mm. - Maximum punching thickness depending on the size of the item to bind: With 800mm length = 2,5mm, with 600 mm length = 4 mm, with 400mm length = 5mm. - Distance from the punching edge adjustable from 2mm up to 6mm (depending on used tools). - Footswitch controlled. Kjlhcdwswfm I Sozslt - Accepts punching bars of 300mm and 200mm, singly, doubly or in combination with 200mm thumb-cut punching bars, up to 800mm maximum length, in the same pitch. - Maximum output: up to 1000 punching/hour, depending on materials used and skills of operator. Punching width (max): 800 mm

Condition: used, Year of construction: 2011, Case maker Kolbus DA 260 Year: 2011 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic case counter - Board magazin for manual loading - Board cutter: PS - Centre strip infeed (flexible) Klslhcdswdgfzswzot - Cloth feeder - Glue unit - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 104 mm Max. mechanical speed: Up to 40 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2005, Three knife trimmer Kolbus HD 142.P Year: 2005 Description: - Automatic setting - Co-Pilot with touchscreen - Right hand infeed - Automatic hopper feeder for inline production - Counter stacker - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 1 Maximum size (cutted): 305 x 420 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum size (uncutted): 310 x 430 x 80 mm Maximum pile height: 80 mm Max. mechanical speed: 3.900 cuts/hr Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Kljlhcdwowc Txxozjt

Year of construction: 2016, Condition: used, KK PULLTESTER KKP03A / series 6 The KK pulltester is a measuring device for quality assurance in the graphic industry. It measures, with extremely high precision the bonding-adhesion of individual pages of cataloges, paperback books, journals, brochures and books. The number of pages to be measured, page numbers, order number and book block length are programmed before the measurements are taken. Technical specifications: Language: english book block format width: approx. 5 - 35 cm book block format length: approx. 7 - 40 cm book block format thickness: approx. 7 cm Klslhcdwowcd Iqszst

Year of construction: 2002, Condition: used, KK PULLTSTER KKP03A / S4 Klslhcdwewcc Hfezet year 2002 The KK pulltester is a measuring device for quality assurance in the graphic industry. It measures, with extremely high precision the bonding-adhesion of individual pages of cataloges, paperback books, journals, brochures and books. The number of pages to be measured, page numbers, order number and book block length are programmed before the measurements are taken. Technical specifications: Language: english book block format width: approx. 5 - 35 cm book block format length: approx. 7 - 40 cm book block format thickness: approx. 7 cm

Condition: used, Year of construction: 2009, Folding machine MBO K 800.2/6 S-KTL Year: 2009 Description: - 16 page folder - MBO Navigator Feeder - Pallet feeder: FP 120 - Excluding pump - Machine was connected to a centralised air system Folding unit Klolhowaxquecdwzot MBO K 800.2/6 S-KTL - Parallel fold unit with 6 buckle plates - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left Delivery Palamides Alpha 700 Year: 2010 - Vertical stack delivery with pressing Max. mechanical speed: 10 - 180 m/min Maximum size: 780 x 1200 mm Minimum size: 170 x 250 mm

Condition: used, Year of construction: 1998, Offset 2 color Shinohara 66-2 Year: 1998 Number of impressions (mio): 79 Machine control - Shinohara console Printing units - Number of printing unit(s): 2 - Straight machine - SAPC Semi Automatic Plate Change - Cooling system Klslhcdowahvaowzst - Dampening system: Shinohara Delivery - Standard delivery - Powder spray: OxyDry Accessories - Plate bender: on delivery Max. output (s/h): 11000 Max. sheet size (mm): 483 x 660 Min. sheet size (mm): 200 x 296 Max. paper thickness (mm): 0,4

Condition: used, Year of construction: 1996, Offset 2 color with perfecting Heidelberg SM52-2-P Year: 1996 Number of impressions (mio): 79 Machine control - CP-Tronic Feeder - Stream feeder - Suction feeder table Printing units - Number of printing unit(s): 2 - Machine with perfecting: 1/1, 2/0 - Alcolor dampening - SAPC Semi Automatic Plate Change - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening cooling and circulation system: MG Electric Delivery - Standard delivery - Plus Version - Powder spray Accessories - Plate bender Kljlhcdowahqkjwzst Max. sheet size (mm): 370 x 520 Min. sheet size (mm): 105 x 145 Max. paper thickness (mm): 0,4

Year of construction: 2005, Condition: used, Book block feeder Solema Fastbook + Autoload Kelhcdwswaawiozolt Year: 2005 This automatic book block feeder offers a variety of applications such as hard cover book lines perfect binders or back gluing machines, and more - Autoload Max. mechanical speed: max. 8,000 products/h Maximum product size: 520 x 440 x 80 mm Minimum product size: 120 x 100 x 2 mm Weight of the machine: 915 kg

Condition: used, Year of construction: 2010, Delivery Palamides Alpha 700 Kjlhcev T U Ttjdwzjlt Year: 2010 - Vertical stack delivery with pressing

Condition: used, Year of construction: 2007, Offset 5 color with perfecting + coating Heidelberg CD74-5-P+LX - C Year: 2007 Number of impressions (mio): 250 Kelhsv Rx A Hscdwzslt Machine control - CP 2000 - Prinect Axis Control Printing units - Number of printing unit(s): 5 - Machine with perfecting: 2/3 - AutoPlate - Alcolor dampening - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening system: Technotrans beta.c - Ink temperature control Coating - Number of coating unit(s): 1 - Tresu chambered doctor blade system - Number of Anilox roller(s): 1 Drying - DryStar: DryStar 2000 IR + hot-air Delivery - Powder spray: PowderStar Accessories - Air cabinet: AirStar - Compressed air compressor: Atlas Copco

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station Klolhcsv Rlv Hodwzst - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 2002, Die-cutter Iberica JRK-105 Year: 2002 Description: Stripping unit Blanking unit Technical specifications: Maximum sheet size: 750 x 1050 mm Minimum sheet size: 350 x 400 mm Minimum paper thickness (according to quality):90 – 95 g/m2 Maximum cardboard thickness: 1.5 mm Maximum corrugated board thickness: 3 mm Maximum operational pressure: 300 T Maximum speed: 8500 sheets/hour Klolhcdov Rci Djwzot Main drive motor with variable speed: 20 CV (15 KW) Total power installed: 43 CV (32 KW) Air required pressure: 6 KG / CM2 Machine appr. Weight: 23.600 KG Floor space occupied: length 10.10 M. width 6.26 M. height 3.30 M.

Condition: used, Year of construction: 2001, Folding machine MBO T 1020/442 Year: 2001 Description: - 16 page folder Feeder - Pallet feeder: FP 102 - Pump Buckle folding unit: 1 MBO T 1020 - 1 - 1020/4 - First buckle folding section with 4 buckle plates - Maximum infeed width: 1020 mm - Perforating shaft - Anti noise hood(s) Buckle folding unit: 2 MBO T 1020 - 2 - 820/4 - Second buckle folding section with 4 buckle plates - Maximum infeed width: 820 mm Klelhcjv Rai Isdwzst - Perforating shaft - Anti noise hood(s) Buckle folding unit: 3 MBO T 1020 - 3 - 680/2RFE - Third buckle folding section with 2 buckle plates - Maximum infeed width: 680 mm - Anti noise hood(s) Delivery MBO SBAP 72ME - Horizontal stack delivery with pressing and marking device

Condition: used, Year of construction: 2003, Perfect binding line Consisting of Gathering machine Kolbus ZU 841.B Year: 2003 Description: - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kolbus KM 410.B Year: 2003 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B Klolhcdev N U U Njwzet - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Description updated

Condition: used, Year of construction: 2000, Folding machine MBO T 800/642 Year: 2000 Description: - 16 page folder - MBO Navigator Feeder - Round pile feeder: R 800 - Dualfeed - Counter - Pump Buckle folding unit: 1 MBO T 800 - 1 - 82/6 - First buckle folding section with 6 buckle plates - Maximum infeed width: 82 cm - Motorial setting - Perforating shaft - Gate fold plate - Anti noise hood(s) Buckle folding unit: 2 MBO T 800 - 2 - 68/4 - Second buckle folding section with 4 buckle plates - Maximum infeed width: 68 cm - Motorial setting - Anti noise hood(s) Buckle folding unit: 3 Klslhcdov N U Uiowzjt MBO T 800 - 3 - 56/2RFE - Third buckle folding section with 2 buckle plates - Maximum infeed width: 56 cm - Anti noise hood(s) Separate knife folding unit MBO Z2 Year: 2000 Delivery MBO SBAP 46ME - Horizontal stack delivery with pressing and marking device

Year of construction: 2021, Condition: used, Large size automatic stripping machine Miaoshi MSCB-ST1080D Year: 2021 The MSCB series automatic stripping machine is designed and manufactured by the Miaoshi printing machinery company in order to solve the problem of difficult taking out finished products by workers after diecutting cardboard. Main Purpose: It is suitable for automatic taking out the products like cloths label, card, medicine boxes, cigarette boxes, small toy boxes, etc. The advantage of the machine: Use the computerized PLC touch screen to adjust the date which is more convenient for users, the main movement is combined by the hydraulic system and ball screw driven by servo motor which has low failure rate and more agile. Features: After diecutting, use the machine to stripping automatically which is more convenient for workers to take out the finished products ,high production, less cost and high efficient for customers. Description: Polar palletlift, model L-600-W-3, year 1990 PLC touch screen monitor with program Manual infeed Klelhcdev N T Sgowzjt Double head stripping Automatic stripping/separation . Conveyor belt to: Automatic palletiser, model HWDM 1080 Max. stripping area: 1080 x 780 mm Min. stripping area: 450 x 320 mm Max. finished product size stripped: 420 x 650 mm Min. finished product size stripped: 30 x 30 mm Stripping height: 40 - 120 mm Stripping speed: 15-20/ min

Condition: used, Year of construction: 2007, Perfect binding line Wohlenberg City E-6000 (edition 6000) Year: 2007 Consisting of Book block feeder Solema 6353 Gathering machine Wohlenberg Sprinter E Kljlhcev N T R Njdwzjt Description: - Hand feeding station - Number of gathering stations: 16 - Optical sheet control: WST - Opticontrol OSC 1-1 - Excluding pump(s) - Set up element - Criss cross delivery - Transfer into the binder Perfect binder Wohlenberg City E-6000 (edition 6000) Description: - TFT touch screen - Number of clamps: 15 - Milling and roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Front cutter: VSS - Hotmelt spine glue unit with integrated pre-melter - Hotmelt side glue unit with integrated pre-melter - PUR spine gluing unit - Rotary cover feeder - Scoring station - First nipping and pressing station - Second nipping and pressing station - Lay down device (to the left) Transport system Description: - Transport system, length (approx): 50 mtr - Escape delivery Three knife trimmer Müller Martini Merit S Year: 1997 Description: - Right hand infeed - Automatic hopper feeder for inline production - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4-17 Book stacker Rima RS-3310S Year: 2007 - Delivery to the right Shrink wrapping machine BVM BMS 6030 W With shrink tunnel

Year of construction: 2023, Condition: used, Case maker Kolbus DA 370 Year: 2023 New generation of casemaker for faster production and shorter make-ready times. Automatic production of book cases, files, display cards, calendar backs or game bobards, at rates of up to 65 cycles/min. Maximum production and process reliability in the manufacture of book cases. The DA 370 casemaker is a versatile machine for a wide range of applications. The machine with its non-stop case feeder is engineered to be ergonomic and extremely operator-friendly so that it can be easily operated by one person. Configuration: - Copilot system with touchscreen - sectional touch panel for direct operation - large display for showing the speed and malfunction messages - board prestacking conveyor to automatically reload the magazines (stream cover and stack feeder) - counter-stacker delivery with roller conveyor delivery incl. table - cloth feeder for non-stop operation with stack magazine - missing product check during separation of cloth and cardboard - cloth cylinder with grippers and interchangeable plates for rubber pads (5 plates 500 mm wide and 5 plates 720 mm wide, incl. 10 rubber pads) - cardboard centre strip magazine - device used to prepare centre strip roll - centre strip waste chopper - centre strip rub-down unit (head and foot) - rub-down unit used to bond the covering material to cardboards and spine strip without creases - extendable gluing station for processing hot glue with glue preparation in the premelter, heated glue roller and scraper roller - viscosity control unit for an automatic supply of water via a water container with a pump - device for padded cases - function used to request individual cases for monitoring purposes on the operating side - servo-controlled drive technology based on Siemens technology Special equipment: - device for producing quarter-bound cases in two operating steps - device for small format - device fo large format - Remote Service Gateway Kolhcdov N Ep Dowzjlt Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 205 x 670 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width open: up to 19 mm - Cloth width: 223 - 708 mm - Cloth height: 158 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm - Centre strip roll thickness: 0,3 - 0,6 mm - Centre strip roll width: 6 - 90 mm - Lining width: 195 - 670 mm - Lining height: 130 - 390 mm

Condition: used, Year of construction: 2006, Folding machine Heidelberg Stahlfolder TH 82/442 Year: 2006 Description: - 16 page folder Feeder - Pallet feeder - Pump Buckle folding unit: 1 Heidelberg Stahlfolder - First buckle folding section with 4 buckle plates - Perforating shaft - Noise hoods for upper folding buckles Buckle folding unit: 2 Heidelberg Stahlfolder - Second buckle folding section with 4 buckle plates - Perforating shaft Kljlhcdsv I Ugvjwzst - Noise hoods for upper folding buckles Buckle folding unit Heidelberg Stahlfolder 3 - Third buckle folding section with 2 buckle plates - Noise hoods for upper folding buckles Delivery Heidelberg Stahlfolder SBP 66 - Horizontal stack delivery with pressing

Condition: used, Year of construction: 2016, Front cutter Müller Martini Frontero Year: 2016 For the front cutting of brochures with flaps already folded-in. Klelhcev Idvgjdwzet Description: - Colour monitor with touch screen - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Knives, total: 2 Technical specifications: - mechanical speed: up to 6.000 cycles/h - size range untrimmed max.: 460 x 320 mm - size range untrimmed min.: 140 x 103 mm - size range trimmed max.: 297 mm - size range trimmed min.: 100 mm - book thickness: 3 - 60 mm - flap projection max.: 2 mm - flap projection min.: 0 mm

Condition: used, Year of construction: 2004, Offset 5 color with coating Roland 705/3B LV Year: 2004 Number of impressions (mio): 258 Machine control - RCI - RCI JobCard Feeder - Suction feeder table - Anti static device - Steel plate in feeder Printing units - Number of printing unit(s): 5 - Straight machine - APL but used as PPL Semi Automatic Plate Change - RolandMatic - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening cooling and circulation system: Technotrans - AlcoSmart - Ink temperature control Coating - Number of coating unit(s): 1 - UV coating - Tresu chambered ductor blade system - Drying position possibilities: 3 positions( 1/2, 2/3 and after 5th) - Number of interdeck cassettes/lamps: 2 - UV interdeck dryer - UV dryer in delivery: 3 lamps - IR dryer in delivery: (Eltosch) Delivery - AirGlide - Extended delivery - Powder spray: Grafix Cantronic 3000 - Compressed air compressor, excluded Kolhcov Ewlvsdwzslt - Dampening rollers: combi