Used Automatic punching machines for sale (171)

Condition: good (used), BRUDERER BSTA 30 punching machine with 2 reels and soundproof cabin - Compressive force max. 30 tons - Stroke rate: 100 to 600 H/min. - Drive power: 0.96 to 5.5 kW - Width: 1200 mm - Depth: 1160 mm - Height: 2150 mm Good condition, fully functional, can be inspected and tested on site. Crshxzbjvb Nm Deppeb Shipping also abroad. Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: used, Year of construction: 1985, pressure 500 t Cohxzbevut N Ajppsrb distance between columns 3100 mm stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm table surface area 2800 x 1600 mm ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation, stored in dismantled condition (no PLC + main motor available)

Condition: good (used), Pressure: 25 t cutting capacity: thickness / width: 1,25/ 140 mm Strokes per minute: min./max.:250 strokes/min. ram stroke - max.: 20 mm Crohxzbpsfim Dwopjb Table surface usable: WxD: 440 x 360 mm

Condition: refurbished (used), Functionality: fully functional, Mechanical roller feed BBV202/120 for attachment to BSTA60 Cehxzbpsr Hmnmsporb Left-hand attachment Drive via main shaft / cardan shaft of the press - cardan shaft / mounting plate is not included in the scope of delivery Mechanical feed length adjustment via spindle No encoder attachment available

Condition: used, Year of construction: 1985, Functionality: fully functional, drop-through hole in table: 15,00,700 mm, table length: 1,400 mm, table width: 500 mm, pressing force: 100 t, stroke adjustment: 20,100 mm, overall weight: 22,000 kg, DGUV certified until: 05/2026, Raster HR 100-1400 automatic punching press with Kohler roller feed With noise-protection cabin With SLE 6000 strip lubrication unit With parts washer Cohxzbowg Ag Hjpperb With Kohler straightener and double-turn decoiler 3-part tie rod design High-quality solid cast iron construction Hydraulic overload system Stroke height 20-100 mm Ram adjustment 60 mm Speed 15-80 rpm S7 control system, built in 2003

Condition: used, Functionality: fully functional, We offer various older eccentric presses, some with feed. One of the presses is equipped with a spring assembly. Crehxzbpevkb Avspsb Notes: Price: Negotiable Sale only to self-collectors Sale exclusively as spare parts donor, without guarantee If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2003, installation height: 555 mm, table length: 2,000 mm, table width: 1,200 mm, pressing force: 315 t, ram stroke: 160 mm, overall weight: 45,000 kg, material thickness: 5 mm, sheet thickness steel (max.): 5 mm, controller manufacturer: SIEMENS, controller model: S7, lifting height: 160 mm, load capacity: 4,000 kg, worktable length: 2,000 mm, coil outer diameter: 1,500 mm, coil weight: 4,000 kg, coil width: 400 mm, material width: 400 mm, number of straightening rollers: 9, sheet thickness (max.): 5 mm, tool height: 555 mm, CONTROLS .. PLC SIEMENS S7 PRESS DESIGN .. drive system: knuckle-joint .. frame design: H-frame, monoblock .. openings in uprights: yes .. number of suspensions: 2 .. feedstock transport direction: left to right PRESS FORCES .. total force (nominal): 315 to .. nominal work capacity: 38 kNm PRESS TABLE .. table surface (left-right): 2000 mm .. table surface (front-back): 1200 mm .. thickness of bolster plate: 200 mm SLIDE .. slide force: 315 to .. table surface (left-right): 1995 mm .. table surface (front-back): 1100 mm .. stroke: 160 mm .. stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS) .. slide adjustment: 140 mm .. stroke rate (min.): 20 /min .. stroke rate (max.): 80 /min .. main drive power: 90 kW TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 555 mm .. distance between columns (H-frame): 2060 mm .. passline opening (free passage in side columns): 1060 mm OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 400 mm .. sheet thickness max.: 5 mm COIL CHAIR .. coil weight max.: 4 to DECOILER .. design: single reel, traversable .. sheet width max.: 400 mm .. sheet width (min): 30 mm .. coil weight max.: 4 to .. max. diameter of coil: 1500 mm .. mandrel expansion range from: 460 mm .. mandrel expansion range up to: 530 mm .. movement: 1500 mm LEVELLER UNIT .. sheet width max.: 400 mm .. sheet width (min): 50 mm .. material cross section max. (450 N/mm2): 1000 mm² .. number of leveller rolls: 9 .. diameter of leveller rolls: 50 mm .. number of infeed-/outfeed rolls: 150 Crjhjwbn Dajxzbppjb .. feed velocity min.: 5 m/min .. feed velocity max.: 50 m/min STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 400 mm .. sheet thickness max.: 5 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 45000 kg ATTACHMENTS (PRESSES) .. decoiler: yes .. leveller unit: yes .. strip feeder: yes Coil Reel KOHLER 4000.1 Straightener KOHLER KRM 50.400/9 KOHLER Loop control BÜ5 Roll feed KOHLER WVE 120/400 HIESSL belt lubrication (wide spray) UNIDOR control system Tool loading consoles

Condition: used, Double-column punching press EBU - Eisenwerk Hensel Type HK 130 Z Eccentric punching press, eccentric press Mach. No. P 54096 / 96, built in 1996 Pressure force 130 tons Table size 1200 x 880 mm Stroke adjustment 8 to 140 mm Ram adjustment 100 mm Ram surface 1150 x 800 mm Table opening (support edge) 450 x 350 mm Table opening (through hole) 440 x 235 mm Column width 1200 mm Column width across 595 mm Installation height of maximum stroke of ram at TDC max. 510 mm (ram adjustment at top) Installation height of maximum stroke of ram at BDC max. 370 mm (ram adjustment at top) Stroke rate 40-120 strokes/min. Table height above floor: 900 mm Main drive motor power: 15 kW Hydraulic motor power: 2.2 kW Total current consumption: 40 amps Power supply: 400 volts, 50 Hz - Hydraulically operated multi-disk wet clutch and spring-loaded safety brake - Continuously adjustable drive via frequency converter (120 strokes at 80 Hz) - Hydraulic overload protection - Automated stroke adjustment - Motorized ram height adjustment with digital actual value display Cohjwa D Npoxzbpperb - Pneumatic, continuously adjustable ram weight counterbalance - Electrical cabinet adjacent (120 x 40 cm x height 220 cm) - Electric two-hand operation for stroke release - Movable Plexiglas safety door on the operator side, with pneumatic opening - Lubrication unit for circulating oil lubrication (fixed to the machine) - Hydraulic unit for the clutch-brake combination (fixed to the machine) Machine) - UNIDOR APS-Mini tool monitoring system, shown opposite - Operating instructions and documentation for the press available as PDF - Electrical circuit diagram available Included: EBU roller feed unit, type EVS 320 Order No.: ZT01054949 / 96, built in 1996 Strip width: 320 mm Strip thickness: max. 4 mm Strip cross-section: max. 1000 mm² - Feed control via the SIEMENS machine control system - Programmable feed path from the roller feed system - Control panel for feed system with Siemens S5 control system with OP 15, shown opposite Space requirement for press with feed system: L x W x H 380 x 180 x 375 cm Space requirement for control cabinet: L x W x H 125 x 41 x 200 cm, approx. 450 kg Transport dimensions of the machine with control cabinet and disassembled drive motor: L x W x H 400 x 230 x 343 cm Height with drive motor: 375 cm Height without drive motor: approx. 343 cm Weight: 18 tons Good condition

Condition: good (used), table size: 350x350mm Crjhxzsfm A Amobppob

Condition: refurbished (used), Functionality: fully functional, Mechanical roller feed BBV202/120 for attachment to BSTA25 or BSTA50 Left-hand attachment Cehxzer Hmpcjbpporb Drive via main shaft / cardan shaft of the press - cardan shaft / mounting plate is not included in the scope of delivery Mechanical feed length adjustment via spindle PTO shaft protection system tube Including encoder attachment

Condition: used, Year of construction: 2011, Bogle B250-740 Stamping Press Feeder: BBV 202 / 120 Max. Pressure: 200kN Total connected Load: 40kW Cehxzbpewa Sp Rsporb Compressed air connection: 6-10 bar Weight: 4830kg

Condition: used, total height: 5,100 mm, total width: 2,600 mm, pressing force: 65 t, For sale: Schuler toggle drawing press PK No. 630 Crohxzbpswab T Eepob

Condition: good (used), Year of construction: 2008, total height: 5,400 mm, installation height: 500 mm, table length: 2,000 mm, table width: 1,100 mm, pressing force: 250 t, overall weight: 57,000 kg, material thickness: 4 mm, sheet thickness steel (max.): 4 mm, space requirement length: 4,800 mm, space requirement width: 2,750 mm, controller manufacturer: SIEMENS, controller model: S7 300, power: 95 kW (129.16 HP), load capacity: 2,000 kg, worktable length: 2,000 mm, coil outer diameter: 2,000 mm, coil weight: 2,000 kg, coil width: 300 mm, material width: 300 mm, number of straightening rollers: 7, sheet thickness (max.): 4 mm, tool height: 500 mm, CONTROLS .. electronic controls SIEMENS S7 300 PRESS DESIGN .. drive system: eccentric / crank .. number of suspensions: 2 .. table cushion: no .. quick die change system: yes PRESS FORCES .. total force (nominal): 250 to PRESS TABLE .. table surface (left-right): 2000 mm .. table surface (front-back): 1100 mm .. height above floor level: 1105 mm .. opening in bed (left-right): 1700 mm .. opening in bed (front-back): 305 mm SLIDE .. table surface (left-right): 2080 mm .. table surface (front-back): 1000 mm .. stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) .. slide adjustment: 120 mm .. stroke adjustment: yes .. stroke min.: 20 mm .. stroke max.: 180 mm Crjhxzswbgy Hjbppjb TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 500 mm .. distance between columns (H-frame): 2055 mm .. passline opening (free passage in side columns): 810 mm DECOILER .. sheet width max.: 300 mm .. coil weight max.: 2 to .. max. diameter of coil: 2000 mm .. mandrel expansion range up to: 550 mm LEVELLER UNIT .. sheet width max.: 310 mm .. number of leveller rolls: 7 .. diameter of leveller rolls: 80 mm STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 200 mm .. sheet thickness max.: 4 mm .. speed max.: 120 m/min ELECTRICAL SPECIFICATIONS .. total power consumption: 95 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4800 mm .. space requirements -front/back-: 2750 mm .. total height: 5400 mm .. total weight approx.: 57000 kg ATTACHMENTS (PRESSES) .. decoiler: yes .. leveller unit: yes .. European CE standards: yes Machine hours: 20,391 h (operating hours) Adjustment strokes: 20, 39, 69, 99, 125, 148, 165, 175, 180 mm Equipment: - External connecting rods for high tilt stability - Hydraulic overload protection - Press force monitoring - Temperature sensors at the bearing points - ABS AHM 2.0T decoiler (1999) - PBK RSD 8/6/300 straightener (2010) - Loop belt control - LW-060-02 roller feed (2008) - Advanced central lubrication system - Press force monitoring - Temperature sensors at the bearing points - Hydraulic tool clamps - Spring-loaded machine feet - Optional: Bilz air springs for an additional €7,000

Condition: excellent (used), Sound insulating cabins. For Bruderer high speed automatic presses. Crehxzbpjiw Icbspob On stock available cabins for machines: BSTA 25 BSTA 41 BSTA 50 BSTA 60 BSTA 80 Cabins sold refurbished, carefully disassembled and packed for transport. Painted in white and anthracite (or colors requested by customer). Cabin is equipped with all needed holes for easy use of a Bruderer press. Front and rear doors with inspection glass. Air ventilator for climate control on top cover. For more information don't hesitate to contact us. We have on stock Bruderer BSTA 25, BSTA 30, BSTA 50, BSTA 110, also Mabu and Schaal automatic punching machines.

Condition: new, Year of construction: 2024, operating hours: 5 h, Functionality: fully functional, Heli electric forklift, very robust, no unnecessary electronics Crohxzjv A Rq Tjbppeb Side shift, lighting, indicators, rear-view mirror, protective roof, trailer coupling, power steering Solid rubber tires at the front, pneumatic tires at the rear With charger Length 2200mm Width 1120mm Height 2130mm Lifting height 3000mm Total weight 2935Kg

Condition: refurbished (used), Functionality: fully functional, Mechanical roller feed BBV202/120 for attachment to BSTA80/110/125 Left-hand attachment Drive via main shaft / cardan shaft of the press - cardan shaft / mounting plate is not included in the scope of delivery Mechanical feed length adjustment via spindle Crshxzbsr D Rfxjppeb PTO shaft protection system tube Including encoder attachment

Condition: used, Year of construction: 1997, Functionality: fully functional, ruderer BSTA 50 UL Stamping Press Power in tons : 50 T Table length : 760 mm Table width: 650 mm Ram stroke : 51 mm Nbr. of strokes/min : 1120 Distance between columns : 760 mm Feeder : BBV202/120 Length x width x height 3100 2700 1800 Weight 8000 kg Cohxzbowa Snmjppsrb

Condition: good (used), Year of construction: 2002, operating hours: 15,000 h, Functionality: fully functional, For sale: 1 used automatic punching press incl. gripper feed unit Manufacturer: Mabu Pressen AG type: 32HSS Gripper feed unit: RC11 YEAR OF MANUFACTURE: 2002 Operating hours: approx. 15,000 Compressive force: 320KN Number of strokes: 100 - 1000 Stroke adjustment: 5 - 40 Mass: 6.200Kg Crjhxzbpjtttcdopob For further technical data see type plate and photo documentation. incl. complete documentation. More pictures and video on request. The punch can be inspected in our warehouse in 09599 Freiberg.

Condition: used, Year of construction: 2013, Press capacity: 160 ton Ram stroke adjustable: 12 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 420 mm Table surface area : 2.000 x 1.200 mm Slide area: 2.000 x 700 mm Hole in table: 1.910 x 300 mm Number of strokes: 30 - 300 s.p.m. Required power: 57 kW Crjhxzbov Tvg Ueppeb Weight of machine approx.: 39 ton Standard configuration Dreher roll feeder Extended machine accessories

Condition: excellent (used), Year of construction: 1993, Müller Weingarten blanking line Pressing force 5,000 kN Stroke rate 15-60. rpm Cshxzbewdm Dkjpporb Stroke 255 mm Stroke adjustment 140 mm Installation height 930 mm Table surface 4,000 x 2,500 mm Plunger area 4,000 x 2,500 mm Belt conveyor Belt width 500-2000 mm Belt thickness 0.5-2.0 mm Reel load capacity 30,000 kg

Condition: used, Year of construction: 2009, Press capacity: 160 ton Ram stroke adjustable: 12 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 420 mm Table surface area : 1.600 x 1.200 mm Slide area: 1.600 x 700 mm Hole in table: 1.510 x 300 mm Number of strokes: 30 - 300 s.p.m. Required power: 51 kW Weight of machine approx.: 32 ton Standard configuration Dreher roll feeder Cohxzjv Tvgnsbpperb Extended machine accessories

Condition: excellent (used), Year of construction: 1985, MECFOND blanking line Crjhxzswdm Ddebppsb Pressing force 5.000 kN Stroke 300 mm ram adjustment 250 mm Stroke rate 15-60. rpm Installation height 790-1035 Table surface 3,500 x 2,500 mm Belt conveyor Belt width 600-2000 mm Belt thickness 0.5-2.0 mm Reel load capacity 30,000 kg

Condition: excellent (used), Year of construction: 2017, Schuler SERVO transfer press MSD2-800 Operating hours 14097 Stroke rate 3-60 1/min Ram adjustment 300 mm Stroke 80-360 / 400 mm ram area 4,000 x 1,700 mm Table surface 4,000 x 1,800 mm Schuler Transfer System Schuler feed Coil line Coiltech Strip width 120-1,300 mm Crshjwdm A Tjxzbppeb Material thickness 0.6-5.0 mm Reel load capacity 10,000 kg

Condition: excellent (used), Year of construction: 2007, Helmerding press Type: 315 KDH / 2100 / 2-m Cohxzbjwdm Aysppsrb Pressing force: 3,150 kN Lifting height: 40-200 mm Strokes per minute 25-100 1/min Ram adjustment 150 mm Installation height 550 mm Ram area 2,000 x 1,100 mm Table surface 2,000 x 1,200 mm Fold-through hole in press table 1,750 x 350 mm Motor power 75 kW Weight of the press 49,000 kg Year of construction 2007 DREHER roller feed Type: WAV-MD-22 Belt width max. 510 mm Belt thickness max. 4.0 mm Year of construction 2003 DREHER straightening machine Type 1676 D-FQ strip width 20-500 mm strip thickness 0.8-5.0 mm Year of construction 2003 DREHER decoiler with hydr. auxiliary drive Type 2381 D-MO-FPS Load capacity 4,500 kg belt width 520 mm

Condition: excellent (used), Year of construction: 2010, Schuler SERVO transfer press MSD2-630 Operating hours 28146 Stroke rate 3-60 1/min Crohxowdm Atszbppsb Slide adjustment 300 mm Stroke 80-400 mm ram area 4,000 x 1,700 mm Table surface 4,000 x 1,800 mm Schuler Transfer System Schuler conveyor system Belt width 80-1,300 mm Material thickness 0.5-3.0 mm