Used hydraulic presses single column for sale (69)

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s Guodovc Ax Nspfx Ah Djk ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: new, Year of construction: 2022, Estimated Equipment Weight 3500 Kg Equipment Dimensions (front x depth x height) (Ca. Aussenmasse) 1354 x 2005 x 2595 mm Table Dimensions (Useful Area) front x depth (Tischgroesse) Ø1050 mm Opening between table and hammer (Daylight) 350 mm Hammer stroke (Stoessel-Verfahrweg) 300 mm Drive power (Leistung in KW) 14,24 Kw Motor Rotation 1500,00 RPM Pump Flow 44,50 LPM Pump Motor Ratio 27,59 cm³/Rot Working Force (Zylinderleistung) 100,00 Ton Return Force (Rückzugskraft) 10 Ton Forward Speed 250 mm/s Working Speed with Pressure (Arbeitsgeschwindigkeit) 3~15 mm/s Gedpohmi T Uefx Ah Douk Return speed (Hebegeschwindigkeit) 150 mm/s Working Pressure (Maximaler Arbeitsdruck) 210,00 Bar Cylinder quantity 2 pc Stem Diameter 41,76 mm Cylinder Diameter 250,97 mm Cylinder stroke (Stoessel-Verfahrweg) 300,00 mm Reservoir Capacity (Volumen des Oeltanks) 350,00 Liters Extractor Cylinder 5,00 T Cylinder travel (Stoessel-Verfahrweg) 150,00 mm

Condition: new, Year of construction: 2024, operating hours: 818 h, functionality: fully functional, pressing force: 350 t, stroke length: 890 mm, warranty duration: 12 months, 📋 Technical Specifications (English) Capacity: 350 Tons at 250 bar (including auxiliary cylinders) Main Cylinder: Ø395 mm, Rod Ø300 mm, Stroke: 890 mm Auxiliary Cylinders: Ø80 x 100 mm, Rod Ø50 mm, Stroke: 890 mm Cushion Cylinders: Ø180 x 230 mm, Rod Ø115 mm (4 units) Motor: 18.5 kW – 25 HP, 1500 rpm, IE3, 380 V Gsdpfx Ahsxf Dzgo Djuk Pump: 71 cc, 105 L/min, variable displacement, pressure-compensated piston type (Taiwan, imported) Valve Block: NG-16, 24 DC, P-Q proportional control Equipped with precise proportional control for all movements: pump protection valve, decompression relief valve, ram–cushion line, pressure transmitter, auxiliary throat protection valve, cushion-seal protection valve, free fall valve. Electrical Panel: Siemens Screen: GMT 7” (domestic, 1-year warranty) Pre-Fill Valve: NG 160 (Taiwan model) Speeds: Down fast speed: 175 mm/s (P-Q proportional adjustable) Up fast speed: 285 mm/s (P-Q proportional adjustable) Pressing speed: 5 – 14.5 mm/s (P-Q proportional adjustable) Dimensions: Table 1200 x 1000 mm, Daylight 1000 mm Linear Scale: Yes Light Curtain: Yes Machine Weight: 15,000 kg ± Oil Tank: 1300 x 900 x 600 mm, 700 L capacity

Condition: used, Press capacity: 50 ton Gujdpfjwyplcsx Ah Djk Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Gujdpfx Asxuhzcsh Djk Technical Data: - Max. pressing force: 100 t - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec - Return speed: 125 mm/min - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm - Table height above floor: 720 mm - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: good (used), Pressure 63to Godpfx Ahoch Dace Douk Stroke -400mm Distance ram-table 700mm Table size 1800x500mm MARCELS MASCHINEN CH

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel * Guedju Nfp Ispfx Ah Dek

Condition: new, Year of construction: 2025, table height: 850 mm, throat depth: 375 mm, pressing force: 200 t, table width: 750 mm, table length: 1,000 mm, Equipment: safety light barrier, STANDARD FEATURES - Vibration method stress / welding tension relieved steel construction body and parts - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL CHCP 200 PRESSURE (TONS) 200 STROKE (MM) 800 THROAT DEPTH (MM) 375 TABLE – RAM DISTANCE (MM) 900 TABLE DIMENSION (MM) 750X1000 PRESS DEPTH (MM) 1500 PRESS WIDTH (MM) 850 TABLE HEIGHY FROM FLOOR (MM) 850 PRESS HEIGHT (MM) 2900 MAIN CYLINDER DIAMETER (MM) 320 ENGINE POWER (KW) 22 Gujdpfxevzkvgj Ah Djk WEIGHT (KG) 11500 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 2 (TWO) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 200 TONS IS AVAILABLE.

Condition: ready for operation (used), C-frame Press, Hydraulic Press, PYE Press 3t, Used Machine Manufacturer: VEB Wema Type: PYTE 3.15 Overall dimensions: 500 x 730 x 1170 mm Pressing force: 3.15 tons Stroke: 280 mm Table size: 280 x 280 mm Gjdjw Hc H Hspfx Ah Dsuk Electrical data: 380 V; 1.5 kW; 4 A

Condition: used, Year of construction: 1991, machine/vehicle number: 041-024/39, Press capacity: 63 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Table surface area : 750 x 560 mm Slide area: 630 x 400 Working speed: 60 mm / sec Return speed: 380 mm / sec Electrical connected load: 12,6 kW Dimensions L x W x H: 1.200 x 1.950 x 2.800 mm Weight of machine approx.: 4,3 ton Gusdsvai R Topfx Ah Djk

Condition: new, Year of construction: 2021, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug Gusdpfx Ahjgrki Sj Djk l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Year of construction: 1979, condition: used, machine/vehicle number: 3534, Pressing force: 630 kN Return force: 100 kN max. ram stroke: 200 mm Installation height: 400 mm Projection approx.: 350 mm table size: 610 x 800 mm drop-through hole in the table: 100 mm Drill hole for stool: 40 mm speed of the pusher: 350 mm/s Pressing speed: 18 mm/s Boiler speed return: 380 mm/s Hydraulic drive: 380 V, 15 kW space requirement: 1800 x 920 x 2440 mm Gedpfx Ahsb Hk Dzo Deuk Weight: 3,94 t

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm Gjdpfx Aheu Nfudo Deuk passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: new, Year of construction: 2025, table height: 850 mm, throat depth: 350 mm, pressing force: 150 t, table width: 700 mm, table length: 1,000 mm, Equipment: safety light barrier, STANDARD FEATURES - Vibration method stress / welding tension relieved steel construction body and parts - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit Gusdpfx Aevzkvajh Dsk - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL CHCP 150 PRESSURE (TONE) 150 STROKE (MM) 700 THROAT DEPTH (MM) 350 TABLE – RAM DISTANCE (MM) 800 TABLE DIMENSION (MM) 700X1000 PRESS DEPTH (MM) 1400 PRESS WIDTH (MM) 800 TABLE HEIGHY FROM FLOOR (MM) 850 PRESS HEIGHT (MM) 2800 MAIN CYLINDER DIAMETER (MM) 280 ENGINE POWER (KW) 18.5 WEIGHT (KG) 10500 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 2 (TWO) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 200 TONS IS AVAILABLE.

Condition: used, Year of construction: 1992, HYDRAP type HPSKZ 63t / 20t Godpfow R Aamex Ah Dsuk Pressure: 63t Down table dimensions: 700x700 mm Up table dimensions: 600x600 mm Stroke length: 600 mm Daylight: 800 mm Cushion: 20t

Condition: ready for operation (used), Hydraulic Press Machine, Coil Winding Press Machine, Used Equipment Gusdpfsu Hkfpjx Ah Djk Dimensions: 1340 x 1240 x 2740 mm Weight: 640 kg Electrical Specifications: 400V Hydraulic Pressure: 100 bar Stroke Length: 180 mm

Condition: good (used), Year of construction: 2014, volume flow: 1,570 m³/h, Vacuum pump Becker Variair RV 2.1944/10 Gusdpfjv Anv Tex Ah Djk Relative pressure: +410 mbar Volume flow: 1570 m3/h Weight: 60 kg + 21 kg inverter

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 068-071/270, throat depth: 150 mm, table width: 280 mm, table length: 280 mm, distance table to ram: 355 mm, stroke length: 280 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid requires timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Gusdjwvh R Aopfx Ah Djk Rated force: 3.15 Mp Operating pressure: 125 kp/cm² Upward speed: 100 mm/s Downward speed: 300 mm/s Ram stroke: 280 mm Throat: 150 mm Maximum distance between table and ram: 355 mm Table dimensions: 280 mm x 280 mm MACHINE DETAILS Dimensions: 750 mm x 630 mm x 1,700 mm Weight: 750 kg Connected load: 1.5 kW Rated current: 3.8 A Operating voltage: 380 V / 50 Hz

Condition: good (used), Year of construction: 1995, For sale Hydraulic press PYE-63S Gusdpfx Ahev Uxtto Dok The price given in the advertisement is a net price to which VAT should be added

Condition: used, Year of construction: 1992, pressure 75 t throat 280 mm Guedpfxjt Hwrze Ah Dok stroke 303 mm total power requirement 15 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: DF0195 - Rev.00, pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm motor capacity:12,7 kW Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Return Speed:140 mm/sec Oil Tank Capacity:160 l Gjdsfhcc Hepfx Ah Djuk Monitor:WEG - 10 Zoll Siemens Control System:S7 1200

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, total height: 2,350 mm, total width: 1,000 mm, total length: 1,300 mm, pressing force: 10 t, table width: 500 mm, table length: 400 mm, operating speed: 100 mm/s, overall weight: 1,300 kg, reverse speed: 450 mm/s, ram plate width: 360 mm, ram plate length: 280 mm, clearance between the columns: 630 mm, stroke length: 400 mm, Equipment: documentation/manual, Hydraulic press PYE 10 S/1M. Year of manufacture: 1983. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 10 tons. Operating pressure: 16 MPa. Upper table: 360 x 280 mm. Lower table: 500 x 400 mm. Clearance: 630 mm. Ram stroke: 400 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Power requirement: 5.2 kW. Weight: 1300 kg. Height: 2350 mm, Length: 1300 mm, Width: 1000 mm. Godpfjwb Dhnox Ah Deuk Machine in very good technical condition. Machine after complete overhaul.

Condition: used, Year of construction: 1990, pressure 25 t throat 250 mm stroke 100 mm total power requirement 7,5 kW Gedpet Hw Ezofx Ah Djuk weight of the machine ca. 3200 kg dimensions of the machine ca. 1000 x 1700 x 2600 m

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: DF0151 - Rev.00, pressure:110 t passage width:800 mm stroke:500 mm Approx. weight (w/o operational materials):5 t Measurements L x W x H:ca. 1950 x 1510 x 3145 mm Return Capacity:11 t Engine Output:20 kW Cylinder diameter:200 mm Max Working height:700 mm Approaching Speed max. :195 mm/sec Pressure Speed:1 - 15 mm/sec. Return Speed:5 - 140 mm/sec Travel:500 mm Ram plate:800 x 600 mm Thickness of ram plaet:6 Zoll Table size:800 x 700 mm Table height above ground level (approx.):900 mm Oil Tank Capacity:400 l Program Memory:200 prgms Monitor Siemens:10 Zoll Siemens Control System:S7 1200 Lightcurtains by Schmersal:700 mm Guodpfsdxrqwsx Ah Dek Speed controlled via proportional valve for speeds between 5 to 195 mm/sec on approach, 1 to 15 mm/sec during pressure phase and 5 to 140 mm/sec during return. HMI - pressure regulation for capacity of hydraulic cylinder from 20 to 110 tons Siemens remote access for maintenance purposes Motor with energy efficiency level IE3 according to CE

Condition: used, Year of construction: 1971, pressure 200 t passage width NA mm stroke 180 mm Godpfx Aot Hw Dwjh Djuk table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration