Used laboratory equipment for sale (692)

Condition: used, This listing is for a Thermo Electron Corporation CR 4i Refrigerated Centrifuge Specifications Capacity: Swing-out rotor: (4 x 750 mL) 3000 mL Fixed angle rotor: (8 x100 mL) 800 mL Maximum load: 3.6 kg Speed range: 500 to 7800 rpm Kjdpfx Asxzhhisbceww RCF range: 20 to 9900 x g Temperature range: -9°C to 40°C Dimensions (H x W x D): 45 x 85 x 66 cm (16.5″ x 33.5″ x 26″) Weight: 106 kg (233 lbs) Electrical: 120V, 60 Hz

Condition: used, This listing is for a Leitz Laborlux 11 Microscope Objectives 10/0.25 40/0.65 100/1.25 Kwjdoxzhuvopfx Abcjw

Condition: used, This listing is for a Mitutoyo DP-3 Calculator Kwedpfx Abjxzhv Hocew

Condition: used, This listing is for a Aurora scentific water bath Ksdpfx Aboxzh Hxoceww

Condition: used, This listing is for 1 of 2 Roche LightCycler 2.0 Thermal Cycler Kwodpfx Absxzgt Rjcsw

Condition: used, This listing is for a Raymond A Lamb E18.12 Mini Hotplate Kwjdpfxoxzgxme Abcjw

Condition: used, This listig is for a Hettich Rotina 420 Centrifuge Kjdpfx Asxzg D Njbceww The Hettich ROTINA 420/ ROTINA 420R is a high performance benchtop centrifuge for large volumes, yet not overly large in size. The new, compact, 2-liter bench top centrifuges are for high sample throughput as well as for high sample volumes.

Condition: used, This listing is for a Fisher Scientific Model 232 Vortex Mixer Kedpfxsxzg Hds Abceww

Condition: used, This listing is for a Innova 2300 Benchtop Open Air Shaker For shaking in ambient conditions. On the bench, in an incubator or in a warm or cold room, the Innova® Platform Shakers are the instrument of choice. Six ruggedly-built models provide reliable, continuous-duty shaking of test tubes and flasks to 6 liters. Low-profile shakers with Triple-Eccentric Drive for uniform motion and microprocessor controls for accurate regulation of shaking speed, 25-500 rpm (less with baffled flasks). Less than 6 inches tall to enable use of multiple shakers in an incubator or environmental chamber. Includes audible and visual alarms, timer (0-99.9 hours) with continuous operation or automatic shut-off at the end of the study. Kwedpoxzg Izsfx Abcjw

Condition: used, This listing is for a Jun-Air OF302 Application Oil-free compressor Ksdjxzg Rvspfx Abcjww 25 liter pressure vessel mounted on frames incl. 5 micron filter regulator with auto-emptied water several withdrawal options for compressed air adjustable rubber mounts flexible applications can also be used for retrofitting existing systems horizontal mounting manner possible ideal for installation in OEM applications 2-frequency driving motor Technical Data Suction - 108 l / min Delivery performance - 38 l / min at 8 bar Volume - 65 dB (A) Cylinder per compressor - 2 Pressure container volume - 25 l Permissible ambient temperature - + 1 ° C to + 40 ° C Supply voltage - 230 V, 50 Hz Engine Power - 0.44 kW Current consumption - 4.1A Thermal protection - Integrated Duty - 100% Weight - 28 kg Dimensions (LxWxH) - 380 x 380 x 610 mm

Condition: used, This listing is for the Stuart Biocote SA8 Vortex Mixer The unit is in full working condition and is ready for immediate use Kwodpfoxzharjx Abcow Stuart Biocote SA8 Vortex Mixer – Product Overview The Stuart SA8 Vortex Mixer is a reliable, high-performance mixer designed for a wide range of laboratory applications. It features a variable speed control between 200 and 2500 rpm, allowing everything from gentle resuspension to vigorous agitation of samples. Key Features: Variable speed control: Select mixing speeds from 200 rpm for gentle mixing up to 2500 rpm for intense agitation. Intermittent or continuous operation: Choose between ‘touch’ mode (mixing starts when the cup is pressed) or continuous mode at the press of a fascia button. Stable low-profile body: Ergonomically designed for user comfort and ease of use on busy lab benches. Robust die-cast construction: Prevents unwanted movement and ensures long-term mechanical stability, even at high speeds. Integral retort rod fixing: Allows vessels to be secured above the vortex point for prolonged or unattended mixing. Accessory compatibility: When used with the optional SA8/1 accessory pack, the SA8 can accommodate various other vessels including test tubes, flasks, and microtitre plates.

Condition: used, This listing is for a Sysmex CA-50 Automated blood coagulation analyzer The CA 50 has 4-detector channel allowing random analysis of up to four different parameters in single or duplicate mode, providing convenience in coagulation screening. Reagent consumption is half of the manual method. Kodpfx Abjxzhcgjcjww

Condition: used, This listing is for a Thermo Shandon Consul Coverslipper The Shandon Consul permanently covers slide-mounted specimens using routinely accepted glass coverslips. This is the only method truly compatible with the optics of today's high-performance microscopes and image analysis systems Dimensions (H x W x D)* 23.6” x 27.2” x 20” (60 x 69 x 51 cm) *Clearance Height (hood up) is 40.9” (103.8 cm). Weight 121 lbs. (55 kg) Power Requirements 110-120V or 220-240V, 50/60Hz; 100 VA Kwsdpsxzhdqofx Abcow

Condition: used, This listing is for a Tissue-Tek TEC 4715 Embedding centre with Cryo console Coldplate Kwjdoxzhg Ejpfx Abcjw

Condition: used, This listing is for a Raymond A Lamb E22 Cassette Labeller The Cassette MicroWriter System is ideal for automating the referencing of processing cassettes with relevant specimen information – providing a secure method of cassette identification. Controllable via an RS232 serial interface, it is possible to link the unit to a wide range of computer equipment and Bar Code systems. This item was removed from a life science lab as surplus to requirements. Features Should the unit run out of cassettes during the sequence, an audible alarm will sound MicroWriter has a serial interface and is controllable from any device with a RS232 communications port. MicroWriter responds to a restricted set of 127 ASCII characters. Special characters are available upon request including foreign languages and customised symbols. Technical Specifications Hopper Capacity: 75 cassette x 6 Tape: 29mm Wide Kjdpfx Aoxzhg Ssbceww

Condition: used, This listing is for a VWR Mini Star Silverline Centrifuge Kodpoxzhiajfx Abceww

Condition: used, This listing is for a Shimadzu SIL-HT HPLC System Shimadzu SIL-HT Auto Sampler Shimadzu LC-10AD VP Shimadzu LC-10AD VP DGU-14A Degasser SPD-10AVP UV-VIS Detector This unit was previosuly being used with the CTO-20AC Column oven and the Applied Biosystems API 2000 It has been removed from the lab while in good working condition, it was well serviced and is still in very good condition. Equipment can be serviced/renovated/refurbished on request at extra cost. THIS IS ITEM DOES NOT COME WITH THE SHIMADZU CTO-20AC COLUMN OVEN Kwjdpfx Aexzhn Aobcow

Condition: used, Electronic crimpers provide secure, reproducible crimps. A single press of the button both closes the crimping jaws to attach the seal and opens them to release the vial. Decappers provide quick and easy removal with a single press of the operation button. Adjustable crimp settings allow compatiblity with standard aluminimum, pressure-release, tin-plated steel and bimetal two-piece seals† Ergonomic design reduces wrist strain Controls and indicator lights are visible and accessible for left- or right-handed operation Crimpers and decappers can be operated while plugged in and recharging Vials can be crimped or decapped while they remain in most standard removable sample trays Crimp-force sensing automatically determines when a proper seal has been formed and opens the jaws to release the vial Kedexzhy Sopfx Abceww

Condition: used, This listing is for a Charles Austen Pump Dymax 14 Diaphram Specifications Maximum Flow, l/min - 14 Maximum Pressure - 2.0 bar / 29.0 psi Maximum Vacuum, mbar - 240 Voltage Options - 230V AC (50hz) 110V AC (50/60hz), 230V AC (50hz) Dims, L x W x H, mm - 210 x 125 x 151 Kwedjxzh Dkjpfx Abcjw

Year of construction: 1998, condition: used, This listing is for a IEC Centra-W Cell washer centrifuge Kodpjxzh Ensfx Abcsww

Condition: used, This listing is for a Applied Biosystems API 2000 MDS SCIEX LC/MS/MS This system was previosly paired with the Shimadzu SIL-HIT HPLC system. It has been removed from the lab while in good working condition, it was well serviced and is still in very good condition. Kwedexzhpmjpfx Abcjw Equipment can be serviced/renovated/refurbished on request at extra cost.

Condition: used, This listing is for a Roche LightCycler II Thermal Cycler Parts Only Kwsdpfx Aoxzgubobcsw

Condition: used, This listing is for a Sakura Tissue-Tek Tec 5 CM E-2 Cold Plate The Sakura Tissue-Tek TEC 5 CM E-2 Cold Plate is the cryogenic cooling component (cold plate) of the broader Sakura Tissue-Tek TEC 5 tissue embedding system — a key part of histology workflows in pathology and research labs. It’s designed to rapidly cool and solidify paraffin-embedded tissue blocks during processing Typical Use Case This cold plate is used by histology technicians and pathologists to cool paraffin blocks immediately after embedding so that they are firm and stable enough for trimming and sectioning on microtomes — a critical step toward producing high-quality histological slides for diagnosis or research. Kjdexzgzbjpfx Abcsww

Condition: used, This listing is for a Qiagen QIAsymphony SP Sample Preparation Fully-Automated DNA RNA Purification Very good working and cosmetic condition The QIAsymphony SP is a versatile nucleic acid purification instrument providing high-quality nucleic acids compatible with with most common downstream assay technologies, such as real-time PCR, digital PCR, and next generation sequencing (NGS). The large range of a dedicated QIAsymphony kits enables optimized purification of genomic DNA, cell-free circulating DNA, RNA, bacterial and viral nucleic acids from a wide range of starting materials Features: Purification of high-quality genomic DNA, pathogen DNA/RNA, cell-free circulating DNA and cellular RNA 1-96 samples in 4 batches, from smallest forensic samples to 10 ml sample volumes Standardized protocols for diagnostic, routine, research and forensic applications Flexible loading of new samples during a run Kwjdpfsxzgzuox Abcow Protocols customizable (protocol steps, labware, etc.) on demand Traceability and LIMS compatibility Compatible with most commonly used sample tubes and elution tubes and plates Compatibile with QIAsymphony DSP kits for diagnostic workflows. Specification: Minimum input volume: 200µl Elution volume: 30-500µl Dimensions: 128 x 103 x 73cm (w x d x h) Weight: 175kg Electric supply: 100 - 230VAC 50/60Hz

Condition: used, This listing is for a Hettich EBA 20 Centrifuge EBA 20 and EBA 20 S are compact and practical centrifuges for small sample volumes. They are fitted as standard with an angle rotor for 8 tubes up to a volume of 15 ml. The EBA 20 attains a max. RCF of 3,461 and is the ideal choice for a medical practice. Kodpfx Absxzg Eajcoww