Used Laser punching machines for sale (66)

Condition: refurbished (used), Year of construction: 2006, REMANUFACTURED - AS NEW Model: Amada EMK 3510 NT electric punch, 58 Station Turret with 4 Auto indexing units Year: 2006 Frame Construction: Bridge Type Press Capacity: 30 tonnes (196kN) Press Type: High speed AC servo direct twin drive Axis Traverse Distance: 1270 x 2500mm Workable Maximum Sheet Size with Auto Positioning: 1270 x 5000mm Max. Material Thickness: 4.5mm mild steel Max. Material Weight: 150Kg Max. Hole Diameter: 114.3mm No. of Stations: 58 Stations: 24 x A (Max. Dia. mm) 24 x B (Max. Dia. mm) 4 x C (Max. Dia. mm) 2 x D (Max. Dia. mm) Auto Indexing: 2 x B (Max Dia mm) 2 x E (Max. Dia. mm) Axis Speed X / Y: X 100m/min, Y80m/min Hits per Minute: 500 min (5mm stroke, 25.4mm pitch): 780 min (5mm stroke, 1.0mm pitch): 1800 min (1.4mm stroke, 0.5mm pitch) Turret Speed Bi-Directional: 330 RPM Punching Accuracy: +/ - 0.1mm Positioning Repeatability: +/ - 0.07mm Ram Stroke Length: 37mm Tool Lubrication: Air Blow System Axis Drives: AC Servo Motor Electric Power Required: AC200V 3-Phase 5-/60Hz, 27kVA Cgebvanetq Hwvohpjt Air Pressure Required: 5.0 Kgf/cm² Machine Length: 5526mm Machine Width: 5120mm Machine Height: 2318mm Machine Weight: 23 tons Standard Equipment: Safety Lightguards Model Of NC: AMNC Touch Screen Data Interface: Networkable

Condition: used, Year of construction: 2011, laser capacity in Watt 2.000 plate dimensions -w x h 1250 x 2500 mm Max. sheet thickness 3 mm In our opinion, the machine is in very good used condition and can be viewed Cgobvjvdt S Asanhpst under power by appointment. Technical details: - Working hours: approx. 33,880 hours - Laser hours: approx. 33,411 hours Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand SIEMENS Model Siemens Sinumerik 840D Main Drive Number of axis 3 Throat Work Chute: Opening for cut pieces Punching force 20 tons (Servo-electric) Table Outer length 2500 mm Outer width 1250 mm Turret Number of tool slots 20 Cebvaju Ha D Ujnhpogt Tools Max tool diameter 89 mm Additional Equipment Sorting Unit (SU6): Capacity for up to 3 euro pallets, each dividable into 2 sections for a total of 6 sorting locations Offline Software License: x1 Brush Table Protective Light Barrier around the machine This 3-axis Finn-Power LPE5 SWUH punch-laser combination was manufactured in 2002. It features a Siemens Sinumerik 840D CNC, a ROFIN-SINAR laser with 2.5 kW power, and a servo-electric punching force of 20 tons. The work surface is 2500×1250 mm, and it includes 20 tool stations with a max tool diameter of 89 mm. Consider the opportunity to buy this Finn-Power LPE5 SWUH punch-laser combination. Contact us for more information about this machine. Application Types Bending & Punching

Condition: ready for operation (used), Year of construction: 1997, operating hours: 50,161 h, machine/vehicle number: 080163, Trumatic 600L for sale. Machine is Trumpf maintained and deployment ready. Cgebvanhsu Hxmzjpst

Condition: used, Year of construction: 2006, Functionality: fully functional, machine/vehicle number: A0220A1351, working range: 3,000 mm, laser power: 3,200 W, type of input current: three-phase, positioning accuracy: 0.02 mm, workpiece length (max.): 3,000 mm, sheet thickness (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness steel (max.): 20 mm, sheet thickness copper (max.): 12 mm, repeat accuracy: 0.02 mm, Equipment: cooling unit, safety light barrier, The machine is still in operation and can be viewed at any time. TruLaser 3030 3200 W CNC laser cutting system X Maximum working range: 3000 mm Cgebvanhsv Rw Dijpot Y Maximum working range: 1500 mm Z Working range max.: 115 mm Control: Siemens Sinumerik 840D Laser power: 3200 watts Operating hours: 89756 hours Laser beam on: 52259 hours Sheet thickness St. Max.: 20 mm Sheet thickness Va. Max.: 12 mm Sheet thickness Al. Max.: 8 mm Standard equipment: - Closed machine frame with integrated laser unit - Laser unit: CO2 laser TruFlow 2000, high-frequency turbo radial blower, maintenance-free, reflecting telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor for small parts/waste - Drives: Maintenance-free three-phase servo motors - Cutting head quick change device - Laser cutting head with 5" lens - Laser cutting head with 7.5" lens - Programmable cutting gas pressure setting Btihd7Lopy - Control line - Focus line - Laser power adjustment - Laser diode position - Nitro line - Sprint line - Contour line - Line Plasma - Automatic detection of the outer edge of the sheet - Programmable power cycles - Microwelding - Automatic shutdown - Workplace lighting - Workshop programming - Safety: Multi-beam light barriers, beam guidance fully hermetically sealed and ventilated monitoring system, Multi-chamber extraction and compact dust extractor, protective cabin - Network connection (RJ45) via installation via teleservice - 3.5" diskette drive + TruFlow3200 flow meter

Condition: excellent (used), Year of construction: 2010, Beam on: 11000h Cebjup Utzevanhpjgt Laser on: 50000h

Condition: good (used), Year of construction: 2014, Functionality: fully functional, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Cgjbvaevz Um Ajnhpot Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: used, Year of construction: 2015, Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Cebjvb Ubyovanhpsgt Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg Standard configuration - Patented servo-electric double drive- Punching force 300 kN- 32 tool stations (4 rotatable stations)- max stroke rate: 400- max material thickness 6mm- Automatic focus adjustment- Automatic gas pressure control- HS sensor cutting head- Nozzle cleaning- Splash guard- Good parts flap Extended machine accessories - TSU tool changer 300 Automation

Condition: used, Year of construction: 2004, operating hours: 35,000 h, Functionality: fully functional, punching force: 22 t, workpiece weight (max.): 230 kg, laser power: 2,700 W, Equipment: cooling unit, TECHNICAL DETAILS Punching force: 22 tons Control system: Siemens Sinumerik 840 D Punching work area: 3,085 x 1,740 mm Combined work area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono-tool holder, 360° rotation Pressure clamp: Programmable for repositioning operations Chip handling: Chip bucket Laser unit: High-frequency excited TruFlow CO₂ laser Laser work area: 3,085 x 1,650 mm Laser power: 2,700 watts Laser cutting heads: 5" lens 7.5" lens, quick-change cutting head system Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Cebvsv N Hxaeanhpogt Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg On-time: 35,000 h Laser on-time: 2,507 h Beam on: 480 h EQUIPMENT - 500 x 500 mm sensor-monitored parts chute - 2 good parts crates - AutoLas - ContourLas - Ejection cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - 2nd lubricant container - Multi-beam Light barriers - Hydraulic quick-release system - Extraction and compact dust extractor - MultiTool function - Thread forming function - Multishear function - Multibend function - Singing/fast beading function - TRL Sheetmaster preparation - Vibration-damped installation - Brush tables

Condition: used, Year of construction: 2001, operating hours: 13,030 h, machine/vehicle number: 090038, punching force: 2,200 t, We are offering our Trumatic 5000R laser punch press for sale. The machine is used and in very good condition. Basic data from the type plate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - working area 3070x1660mm - max. sheet thickness 8mm - Rotation axis of the tool head C1 and C2 - Forming function - Thread function - Multibend function - Pneumatic press - automatic sliding of the details 500x500mm - water-cooled servomotors Additional equipment of the machine: - light barrier Softpunch function - Details slide sensor Cgebvanhounh D Dopst - Device for blowing out small details - System for chip extraction - Separate lubrication of punching and threading tools Number of NC units: 13030h We sell machines without tools. Machine regularly maintained by authorized Trumpf service with original spare parts, last machine maintenance on 21.02.2024r.

Condition: used, Year of construction: 2004, operating hours: 26,000 h, Functionality: fully functional, 2004 AMADA EM2510NT. The perforating machine is in good condition and has always been serviced on time by Amada service representatives. All documentation, service reports are included. Recently replaced bugno encoder. The machine is sold with software and tools. Perforating machine connected, available for testing, inspection. Specification: Year: 2004.07 Made in France. Operating time in hours: 26 426 Hours of power: 65 006 Software: Control unit: AMADA AMNC-F Perforating force: 20 tonnes Stations: 45 Tools: sold with tools Metal length: 2500 mm. Metal width: 1270 mm. Sheet thickness: 3,2 mm. Cgsbvst Hg Acsanhpot Metal width change: 5000 mm. Workpiece weight: 150 kg. Dimensions: P 6080 x P 5120 x A2318 mm Weight: 16 500 kg Location. Available for testing: Yes If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 19 2-11 001, Toploader TRA-S 1100 (2Tank) Cgjbvev D Iyuoanhpot

Condition: good (used), Year of construction: 2004, X max. working range: 3085 mm Y Working range max.: 1740 mm Cgebvanevz Uikehpot Control: Siemens Sinumerik 840 D Laser power: 3200 watts Laser beam on: 11269 hours Operating hours: 94268 hrs. Standard equipment: - Sturdy C frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500x500mm for punching and laser station, ejection cylinder on laser chute - 2 good parts boxes - Laser unit: High-frequency excited CO2 laser TLF 2000, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5'' lens, quick-change device, APC distance control - Lens monitoring sensor system - Additional cutting head with 7.5'' lens - Punching head: Hydraulic mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2nd lubricant container, punching slug extraction, chip bucket - Sinumerik 840D control system, TFT color screen 10.4'', simple operation, online help, diagnostic functions, maintenance logbook, technology data, order tables, Teleserice, 3.5'' floppy disk drive, RJ45 network connection Safety: Multi-beam light barriers, quick shut-off hydraulics, suction and compact dust extractor, protective device against stray radiation on the cutting head + TLF 3200 laser + Thread forming function + MultiTool function + Signing / fast beading function + MultiBend function + Rolling technology function + Additional clamping claw + Repositioning cylinder + Individually opening claws + Tank heating + Camber detection + Chip conveyor

Condition: ready for operation (used), Year of construction: 2002, operating hours: 11,676 h, Functionality: fully functional, machine/vehicle number: KM-1148, punching force: 22 t, workpiece weight (max.): 230 kg, laser power: 3,200 W, punching diameter: 76 mm, workpiece length (max.): 1,650 mm, workpiece width (max.): 2,585 mm, sheet thickness (max.): 8 mm, No reserve price - guaranteed sale at the highest bid! Machine including SheetMaster and TrumaGrip TECHNICAL DETAILS Punching force: 22 tons Control: Siemens Sinumerik 840 D Punching working area: 3,085 x 1,740 mm Combined working area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono tool holder, 360° rotation Holder: Programmable for repositioning processes Chip handling: Chip bucket Laser unit: High-frequency excited CO₂ laser TruFlow Laser working area: 3,085 x 1,650 mm Laser power: 2,700 Watt Laser cutting heads: 5" lens, 7.5" lens, cutting head quick-change device Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg Switch-on time: 59,2344 h Laser cutting time: 11,676 h EQUIPMENT - Parts chute 500 x 500 mm, sensor-monitored - 2 good parts boxes - AutoLas - Ejection cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - 2nd lubricant container - Multi-beam Light barriers - Quick shutdown hydraulics - Extraction and compact dust extractor - MultiTool function - Thread forming function - Vibration-damped installation - Brush tables - Chip conveyor with tilting container - Standard equipment SheetMaster 1606 - Loading station with spreading magnets Cebvaov Am Twjnhpegt - TRUMAGRIP scrap skeleton disposal unit with scissor lift table - Sheet thickness gauge for double sheet control - Suction plate module - Parts conveyor belt A deposit of EUR 7,500 is required for transport security.

Condition: used, Year of construction: 2007, - Siemens SINUMERIK 840D CNC control system - TruFlow 2700 Laser - Trump SheetMaster 1600 - Year of construction 2007 - Machine not fully functional The following parts have been replaced by Trumpf since 2022 - 11/22 Retrofit kit K01 Box PC from 620 to 627C - 12/22 UE module - 05/23 Compressor - 06/23 A-mirror - 02/24 Power Tube transmitter tube - 09/24 Conveyor belt Specifications Machine: - Working area X x Y without repositioning: 2585 x 1650 mm - Punching mode: 3085 x 1740 mm - Laser operation: 3085 x 1650 mm - Max. Punching diameter single stroke: 76.2 mm on all tool stations - Max. Punching diameter standard MultiCut: 200 mm - Max. Edge height: 25 mm - Programmable part chutes: 2 - Max. Part size: 500 x 500 mm Outputs: - Max. Sheet thickness: 8 mm - Max. Punching force (incl. 20 kN hold-down device): 220 kN - Active hold-down device (programmable in stages): 4.5 - 20 kN - Max. Workpiece weight: 230 kg - Max. Passage height in punching mode: 35 mm - Max. Passage height in laser mode: 22 mm Speeds: - X-axis: 90 m/min Cgjbvaevhdcyjnhpst - Y-axis: 60 m/min - Simultaneous: 108 m/min - Punching stroke sequence: 900 /min - Stroke sequence marking: 2800 /min - C-axis punching: 60 rpm - C-axis thread forming: 330 rpm Tools: - Tool positions on the linear magazine: 18 with 3 clamps - Number of tools when using MultiTool: 18 - 180 tools - Rotation of all tools: 360° through-rotation - Tool change time: 1.5 - 5 s Accuracy: - Position deviation: ± 0.1 mm - Average position spread: ± 0.03 mm Drives: - X-/Y-/C-axis: digital three-phase servo motors (maintenance-free) - Punching head: electro-hydraulic drive - Trumpf CNC control: Basis: Siemens SINUMERIK 840D TruFlow 2700 laser: - Laser power: 140 - 2700 W - Beam mode: TEM00 - Max. Sheet thickness mild steel (RSt 37-2): 8 mm - Max. Sheet thickness stainless steel (1.4301 N2): 6 mm - Max. Max. sheet thickness aluminum alloys (N2): 4 mm Total system: - Electrical connection: 73 kVA - Pneumatic connection pressure: 7 bar - Max. Pressure consumption: 65 Nm³/h - Short-term max. compressed air consumption of the SheetMaster at 3 discharges/min: 50 Nm³/h Dimensions and weights: - Space requirement WxL: 7900 x 9100 mm - Height: 2400 mm - Weight: approx. 22500 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 13,549 h, Functionality: fully functional, punching force: 22 t, workpiece weight (max.): 200 kg, laser power: 3,200 W, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 3 mm, TECHNICAL DETAILS Punching work area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control system: Siemens Sinumerik 840 D Laser power: 140 - 3,200 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Cutting capacity mild steel: 8 mm Cutting capacity aluminum: 3 mm Cutting capacity stainless steel: 4 mm Workpiece weight: max. 200 kg Punching force: 220 kN Active hold-down device: 4.5 - 20 kN Cebvovzrb Doanhpegt Linear magazine: 21 tools with 3 clamps Programmable chute: 500 x 500 mm C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Stroke sequence marking: 2800 1/min Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 tons Laser switch-on time: 49,949 h Cutting time: 13,549 h EQUIPMENT - Sturdy C-frame - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - 2 x good parts box - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5" lens, quick-change device, distance control APC - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Safety: multi-beam light barriers, quick shut-off hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 3200 laser incl. 9" cutting head for stainless steel - AutoLas Plus - MultiTool function - MultiBend function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 1 x additional clamping claw - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: refurbished (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 403/FL06, punching force: 28 t, laser power: 2,000 W, laser wavelength: 1,070 nm, punching diameter: 105 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 15 mm, table length: 3,100 mm, table height: 900 mm, table width: 4,250 mm, No reserve price - guaranteed sale at the highest bid! Machine was overhauled by Boschert in 2022! TECHNICAL DETAILS Punching force: approx. 2 x 280 kN (28 t) Punching throat: approx. 1,750 mm Max. punching diameter: 105 mm (any shape within 105 mm) Max. sheet thickness: 6 mm (clamp opening) Max. stroke height: 90 mm (continuously programmable) Thread cutting: M3 - M12 Slide stroke: 160 mm Stroke rate (for sheet thickness 2 mm) Travel path 0.1 mm: 280 strokes/min (385 with fast hydraulics) Travel path 2.0 mm: 200 strokes/min (275 with fast hydraulics) Travel path 25.0 mm: 125 strokes/min (175 with fast hydraulics) Table dimensions Cgobovwbrwevanhpjt Table width left + right: 4,250 mm / 3,250 mm Table depth: 3,100 mm Table height: 900 mm Laser source Model: XFocus 2000 Max. connected load: 7 kVA (100% duty cycle) Operating temperature: 5 - 40 °C (store frost-free) Air humidity: 10–95% Storage temperature: -40 - 75 °C (without water) Laser protection class: Class 4 according to DIN EN 60825-1 Sheet thicknesses Mild steel (maximum): 15 mm Mild steel (recommended): 0.5 - 10 mm Alloyed steel (maximum): 8 mm Alloyed steel (recommended): 0.3 - 6 mm Aluminum (maximum): 6 mm Aluminum (recommended): 0.3 - 4 mm Fiber laser Output power: 2,000 W Wavelength: 1,070 nm (± 10 nm) Modulation rate: 5 kHz Pilot laser power: < 1.0 mW Optical fiber: fiber cross-section 100 µm Cooler Max. connected load: 9 kVA Number of cooling circuits: 2 Design point: 33 °C Air volume: 4,000 m³/h Temperature range (operation): 10 - 40 °C (store frost-free) Storage temperature: -40 - 64 °C (without water) Coolant: DI water Pressure: max. 2 bar Flow rate: laser cooling circuit 28 l/min, head circuit 2 l/min Coolant water temperature: laser 21 °C (± 1 K), head 25 °C (± 1 K) Cooling capacity: 5.5 kW Dimensions (L x W x H): 626 x 807 x 1,362 mm Mass: 340 kg (without water filling) MACHINE DETAILS Overall width: 6,500 mm Overall depth: 5,000 mm Overall height: 2,100 mm Drive power: 20 kVA (25 kVA with fast hydraulics) Machine weight: 16,200 kg Hydraulic oil filling: 115 l (160 l with fast hydraulics) Laser dimensions (L x W x H): 1,250 x 810 x 1,500 mm Laser mass: approx. 300 kg

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, punching force: 22 t, workpiece weight (max.): 200 kg, punching diameter: 76 mm, workpiece length (max.): 2,585 mm, workpiece width (max.): 1,280 mm, sheet thickness (max.): 8 mm, No reserve price - guaranteed sale at the highest bid! Cjbvanhovytdwopsgt Technical information according to the manufacturer's brochure TECHNICAL DETAILS Control: TRUMPF CNC control based on the SINUMERIK 840D Passage height in punching mode: 35 mm Passage height in laser mode: 22 mm Maximum sheet thickness in punching mode: 8 mm Workpiece weight: 200 kg Partial slide: 500 x 500 mm Working area (X x Y) without repositioning Combined operation: 2,585 x 1,280 mm Punching mode: 3,085 x 1,370 mm Laser operation: 3,085 x 1,280 mm Punching Maximum punching force: 220 kN Maximum punching diameter: 76 mm Maximum stroke rate: 600 rpm Max. number of tool positions on the linear magazine: 19 with 2 Claws Laser Model: TLF 2400 Power: 2,400 W Sheet thickness mild steel: 8 mm Sheet thickness stainless steel: 6 mm Sheet thickness aluminum: 4 mm Distance control: DIAS III Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed simultaneous: 108 m/min Positioning speed C-axis: 1 revolution/s Positioning speed C-axis when thread forming: 3 revolutions/s Accuracy Position deviation: ± 0.1 mm Average position spread: ± 0.03 mm MACHINE DETAILS Length: 8,100 mm Width: 7,500 mm Height: 2,400 mm Machine weight: 16,000 kg Electrical connection with TLF 2400: 70 kVA Connection pressure: 7 bar Maximum compressed air consumption: 65 Nm³/h

Condition: reconditioned (used), Year of construction: 2010, Functionality: fully functional, punching force: 22 t, laser power: 3,200 W, X Working area max.: 2550 mm Y Working area max.: 1250 mm Control: Rexroth IndraMotion MTX Laser power: 3200 watts Standard equipment: Machine - Stable, easily accessible C-frame - Moving ball roller tables - Linear magazine for tool stations and clamping claws - 22 tool stations, 3 clamping claws - Foot switch for closing the claws - Flap for punched parts 500 x 500 mm incl. sensor - Chip container - 2 good part containers (punching and laser side) - Initial filling of hydraulic oil - ContourLine - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - Fast flap for laser parts 500 x 500 mm incl. sensor - Raisable laser cutting support - Slag cone detection TRUMPF Laser - CO2 laser TruFlow 2700 - Optimized standby mode - Maintenance-free turbo radial blower - High frequency excitation - Laser control TASC CUTTING HEAD - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine PUNCHING HEAD - Electro-hydraulic punching head - Hydraulic single tool holder - 360° rotation - Programmable hold-down device (active / passive / repositioning) - Tool length compensation - Spray lubrication of punch - Punch slug extraction - Level monitoring of thread forming and tool lubrication CONTROL - Open control based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via Internet - Automatic switch-off - Data transfer - USB interface - RJ45 network connection SAFETY - CE marking - Multi-beam light barriers - Quick hydraulic shutdown - Bulge detection - Calculation of filling level in the punching console + Laser TruFlow 3200 including LensLine and optimized standby + Nozzle changer + Thread forming function including thread counter + MultiBend function + MultiTool function + Deburring and rolling technology + Active die + Adaptive stroke calibration + Spray lubrication of die + Repositioning cylinder + Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading aid Csbvasvz Uvqjnhpsgt + Blow-out device for small parts + 10 RTC setup cassettes with die plate Automation: + Sheetmaster for sheet metal 2500 x 1250 mm - Suction frame with 36 suction cups (Y-axis=400mm) - Movable suction bar (V-axis=170mm) - Peeling suction cup - Vacuum sensors - Sheet thickness gauge for double sheet control - automatic clamp closing - SheetMaster parallel to main time + Peeling system + Additional package with 9 suction cups + Unloading monitoring + SortMaster Pallet lengthways + GripMaster for sheet metal 2500 x 1250 mm + Scissor lifting table 400 mm + Tiltable scrap pallet 2500 x 1250 mm + Toolmaster 70 + ToolMaster parallel setup + Parts conveyor belt punching station + Parts conveyor belt laser station + Storage interface

Condition: excellent (used), Year of construction: 2010, operating hours: 44,973 h, Functionality: fully functional, punching force: 22 t, laser power: 2,700 W, sheet thickness (max.): 8 mm, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, number of slots in tool magazine: 21, AUTOMATION - SheetMaster - GripMaster - TrumaSort R4 ADDITIONAL EQUIPMENT - Laser TruFlow 2700 - MultiTool function - Thread forming function - Marking/fast beading function - MultiBend function - Rolling technology function - Repositioning cylinder - Bulge detection - Chip conveyor TECHNICAL DETAILS Punching working area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control: Siemens Sinumerik 840 D Laser Laser power: 140 - 2,700 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Workpiece weight: max. 200 kg Punching Punching force: 220 kN Active hold-down clamps: 4.5 - 20 kN Linear magazine: 21 tools Programmable slide: 500 x 500 mm Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Signing stroke sequence: 2800 rpm Position deviation: ± 0.10 mm Position scatter: ± 0.03 mm MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 t Laser switch-on time: 29,826 h Cgobvanhjvxivmopst Cutting time: 6,054 h Machine switch-on time: 44,973 h Compressed air connection: 7 ± 1 bar Consumption of laser gas CO2 / N2 / He: 1 / 6 / 13 l/h EQUIPMENT - Stable, easily accessible C-frame - Drives with maintenance-free three-phase motors - Programmable hold-down device for repositioning - Sensor-monitored part slides for punching and laser station, ejection cylinder on laser slide - Laser unit: High-frequency excited CO2 laser, vibration-insulated, including cooling unit and laser control DIAS 3 - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5'' lens, quick-change device, distance control - Multi-beam light barriers, quick hydraulic shutdown, extraction and compact dust extractor, protective device against scattered radiation on the cutting head

Condition: good (used), Thread former for Trupunch 1000-6000 used in good condition Cobvanotlpm Aohpsgt

Condition: used, Year of construction: 1970, pressure 250 t stroke 20-140 mm no. of strokes 10- 60 Hub/min hole in the table 300 x 300 mm table-size 1050 x 820 mm ram adjustment 0-100 mm number of connecting rods 1 Stück table surface area 800 x 800 mm dimension of ram 690 x 700 mm total power requirement 26 kW weight of the machine ca. 15 t dimensions of the machine ca. 6 x 2 x 4 m Complete line with decoiler, leveller and grip infeeder for 150 mm Cebst Tqiyovanhpjgt x 1-3 mm material. Machine has a PIV drive.

Condition: good (used), Year of construction: 2001, operating hours: 53,845 h, Functionality: fully functional, machine/vehicle number: 9312, punching force: 22 t, laser power: 2,400 W, Equipment: safety light barrier, Year of construction 2001 type 9312 Serial no. 080540 The machine now has 53845 hours on it The 2400W laser (still produces 2550W) has a duration of 44387 hours, the beam of which is 11024 hours Cgjbvsvt T Tloanhpjt It is a complete machine with a Trumagrip for removing the residual plate including scissor lift. Trumasort with 4 bins sorting options (and 4 extra bins) Trumalift for loading and unloading pieces and plates Conveyor belt for removing punched material. Furthermore, 19 cassettes and 2 thread tapping tools. 4 multi-tools, each with 6 types of punching tools. There is a slight loss of oil from the punch head. Oil pressure pump replaced in December 2022 The machine should be dismantled on February 24/25/26 (20/21 still possible in consultation)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,918 h, Functionality: fully functional, punching force: 22 t, laser power: 2,700 W, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 8 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Cgebvaevi I Aysnhpot Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, punching force: 22 t, laser power: 1,800 W, sheet thickness (max.): 8 mm, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, With comprehensive equipment: TrumaTool, Grip and scissor lift table TECHNICAL DETAILS Punching work area: 2,585 x 1,650 mm Laser working area: 3,085 x 1,740 mm Combined working area: 3,085 x 1,650 mm Control system: Siemens Sinumerik 840 D Punching sheet thickness: 8 mm Sheet thickness aluminum / stainless steel / mild steel: 3 / 4 / 8 mm Punching force: 220 kN Part size: 500 x 500 mm Punching diameter: 76 mm Workpiece weight: max. 230 kg Stroke rate: 600 1/min Tool places: 18 pieces with 3 clamps Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min C-axis: 1 rpm C-axis thread forming: 3 rpm Cgjbvanhoulkk Iepjt MACHINE DETAILS Mains voltage: 400 V Laser power: 1800 W Dimensions: 8,700 x 7,800 x 2,400 mm Machine weight: approx. 23,000 kg Connected load: 62 kVA