Used Other woodworking machinery for sale (336)

Year of construction: 2018, condition: new, Exhibition machine Year of construction: 2018 with full warranty Equipment and technical data: Range of functions - Room geometry detection through laser measurements - Tachymeter function: standard measuring points can be extended by individual measuring points can be extended - Complex 360° panorama recording of each room scan - Image and measurement functions for every detail - Complete photo documentation - Display of preliminary panoramas via the HottScan app - Data transfer via USB stick or WiFi with the app Technical data at a glance Protractor features Measuring range: Horizontal 347°, vertical 180° Accuracy: 0.01°, relative Laser distance meter features Type: Coaxial, visible red laser Measuring range: 0.05-80 m Laser class: 2 Laser type: 650 nm; < lmW ø laser dot: (at distance) 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & lighting conditions Operation User interface: Control panel with soft-touch buttons and LED illumination/ display battery capacity/status display and error display Data exchange Flash memory 32 GB, USB and WLAN Range: 50 m (depending on environment) Power supply Power supply unit: 14.8 V, 1.2 A, with a final charging voltage of 16.8 V, Primary voltage is 100 V - 240 V, 19.5 VA, 50/60 Hz Battery: Operating range between 11.2 V and 16.8 V Running time: Up to 11.5 hours, depending on the use of the LED lighting; approx. 8 hours with typical use Environmental conditions Operating temperature: Operating and charging the batteries: +0° to +40° C Storage temperature: -20° to +50° C Dust and humidity: IP 40 Special features - Hot Swap:The rechargeable battery can be replaced within a few seconds during seconds during operation. - The integrated lighting provides support in poor lighting lighting conditions. - Mobility:The low weight (approx. 4.7 kg) in conjunction with the tripod makes the HottScan HS-1 a handy companion for site companion for site inspections in terms of maintenance and maintenance. Your advantages - Mobility (low weight) and long operating time - Avoidance of multiple inspections - Battery change within a few seconds - Free loaner in case of service from the 3rd working day Incl. HottScan room modeler full version Software for generating a 3D room from the images taken by the room scanner room scanner, export of mass mass data in CSV format, geometry export in DWG/DXF format with layer structure and Collada format Scope of services - Simple modeling of rooms from the first-person perspective - Export of mass data in CSV format - Geometry export: DWG/DXF format with layer structure and Collada format with textures format with textures; Continuous further processing in all 3D CAD programs Incl. transport case for HottScan 3D room scanner - Weather, corrosion and temperature resistant aluminum sheet - Cover and base profile butt-welded - 2 stainless steel hinges - 2 lever hinged latches - All-round rubber seal for dust and splash protection - splash water protection - Temperature resistance from -40°C to +80°C Interior fittings - Nubbed foam in the upper part - Foam insert in the lower part with product nests Hnedpfxjw I Uize Aabju Availability: Short term Location: Hochheim

Year of construction: 2003, condition: used, Machine for assembling and pressing furniture bodies, completely automatic, and self-regulating, reads the dimensions of the piece and positions the elements according to the dimensions read. The pressing is with an electromechanical system, the pressing force is adjustable with potentiometers on the control console. The pressing has been intentionally moved to the beginning of the machine, so that the operator has to make the minimum path in case of working on the furniture being pressed Clamp for passing furniture bodies Useful working area in height from 300 mm to 1220 mm Working area in width from 300 mm to 2500 mm Working area in depth from 200 mm to 610 mm Height of the work surface from the ground 550 mm Motorized belt with speed 16 m/min Installed power 0.75 kW Weight 2000 kg Motorized transfers with loading and unloading belt Hnodpfov Am Egjx Aabju

Condition: used, machine/vehicle number: 007924, Position 1: Panel Feeding and Loading BARBERAN-RFU-4-C-1700 Position 2: Brushing Machines BARBERAN-RFU-4-C-1700 Position 3: Calender BARBERAN-RFU-4-C-1700 Hnodswu Agcjpfx Aabsu Position 4: Gluing Machine BARBERAN-RFU-4-C-1700 Position 5: Continuous Cycle Presses BARBERAN-RFU-4-C-1700 Position 6: Panel Stacking and Offloading BARBERAN-RFU-4-C-1700

Condition: used, Year of construction: 2004, Osika Furniture Company Will sell used Sawmill Artiglio ST 130 complete Complete with automation for feeding logs and receiving lumber . Mounted ready for testing . First owner from new in Poland Hodpjqbq Iyofx Aabenu 2004 production 2006 first start-up

Year of construction: 2008, condition: ready for operation (used), Additional Equipment User manual, CE certificate, electric diagram This REINBOLD RMZ 500 was manufactured in 2008. A robust wood shredder with a productivity of up to 850 kg/hour, it features two 11 kW motors and a large upper opening of 1220×1020 mm. Ideal for heavy-duty shredding tasks, it also includes a user manual, CE certificate, and electric diagram. Weight is 1500 kg. Contact us for more information about this machine. Application Types Other Woodworking Machinery Hnjdpfx Ajwr N Injabou

Year of construction: 2025, condition: new, This 4-side -pointer was designed mainly for small and medium quantities with manual feeding. The machine has the following performance. As a drive type for the hydraulic pump, the machine is optionally supplied with a 7.5 kW electric motor or with connection for a cardan shaft. Sometimes it can be very simple: the mechanical sharpening machine has been specially designed for fast and practical feeding under manual feeding. It is therefore perfect for producing small and medium quantities of fence elements, wooden posts and palisades. Ideal for flexible landscaping or hastily planned timber construction. It can process any type of milled and peeled wood. Even curved weak wood, or logs with bark are no problem for the sharp knives. Maximum log diameter 270 mm Shortest lenght of log 1,15 m 5 pointing angles adjustable For rounded, peeled and unmachined logs Capacity 150 to 250 poles/houre Cylinder force 2 x 10 to Oilpressure 200 bar Power unit Electro motor 7,5 kW Hedpfx Aajfw A D Njbjnu PTO drive Tractor pump

Year of construction: 2025, condition: like new (used), functionality: fully functional, 2025 BCAMCNC 5 Axis CNC Router – Like New, Never Used For sale is a 2025 BCAMCNC 5 Axis CNC Router, installed but never put into production. This machine is in as-new condition, making it an excellent opportunity to purchase a state-of-the-art 5 axis router without the lead times or cost of a brand-new unit. The BCAMCNC 5 Axis Router is designed for high-precision machining of complex parts, ideal for industries such as aerospace, automotive, furniture, marine, signage, mould making, and advanced composites. ✅ Key Features & Benefits 5 Axis CNC machining – full simultaneous interpolation for complex 3D parts Like new – installed but never used Heavy-duty welded frame for stability and long-term accuracy High-speed spindle for efficient cutting across a wide range of materials Automatic tool changer (ATC) for maximum productivity User-friendly CNC control with advanced software integration Vacuum table for secure workpiece holding Perfect for wood, plastics, composites, foams, aluminium and non-ferrous metals 📐 Technical Specifications (2025 BCAMCNC 5 Axis CNC Router) Table Size: 3000 × 1500 mm X-Axis Travel: 3000 mm Y-Axis Travel: 1500 mm Z-Axis Travel: 1200 mm A-Axis Rotation: ±120° C-Axis Rotation: ±360° continuous Spindle: 9kW High-frequency HSD (18,000 RPM) Tool Changer: 8 position automatic tool changer (ATC) Drive System: Servo motors with helical rack & pinion on X/Y, ball screw on Z Table: Vacuum table with powerful 7.5kW pump, multi-zone clamping Control System: Syntec 610MA-ES industrial CNC controller Max Cutting Speed: Up to 25 m/min Repeat Accuracy: ±0.05 mm Power Supply: 380V / 50Hz 📦 Included with Machine Full extraction-ready setup Includes tooling package Documentation & manuals 🌍 Condition Installed but never used – machine is like new 2025 model – latest generation technology Available immediately – no waiting times 🔑 Summary Hedpfx Aaoxddk Ssbjnu This is a rare chance to purchase a 2025 BCAMCNC 5 Axis CNC Router in unused condition. With full 5 axis capability, a heavy-duty structure, and precision control, it is the perfect solution for companies requiring high accuracy and productivity in machining complex 3D parts.

Year of construction: 2024, condition: new, - With 5 spindels - Grooved table for short pieces Outstanding characteristics: Sealed safety hood to reduce noise levels and prevent chips from splash Adopting stepless variable feed speed, inverter feed speed of 6- 30 m/min Each spindle driven by independence motor with powerful cutting To fit with heavy – duty cutting as equipping with two pairs of high precision bearing at two ends of spindle assembly Centralized spindle adjustment on the front panel is easy to work Hard Chromed electro plated treatment has been adopted for the durability of the work table surface Short feeding device is equiped for smooth feed avaliably Bottom driving roller to improve feeding performance Pneumatic pressure feed wheel can be seperately adjusted, make for feed pieces with various thickness Manual oil pump to lubricate the working tables and slides, to be easy to centralized control Pre- trimming cutter on the first bottom shaft and teethed work table was designed to reduce the noise level effectively and cut out the precise linearity Removable work table of vertical spindle was designed of dust proof of efectively protect the screw bar from pollution Special hardness treatment of HRC 58 has been adopted on the work table beside of the first bottom spindle for increasing the durability and natural life of the work table surface Adopting electric component from international class with steady quality TECHNICAL SPECIFICATIONS: - Working width (min): 20 mm - Working width (max): 240 mm - Working thickness (min): 8 mm - Working thickness (max): 180 mm - Number of spindels: 5 kos - spindle speed: 6000 r/min Hjdpfx Aajgp Dcqobenu - Diameter of Spindle: 40 mm INSTALLED CUTTER-BLOCKS (from first to last): - first bottom spindle: diameter 108- 145 mm - right spindle: diameter 108- 200 mm - left spindle: diameter 108 -200 mm - first top spindle: diameter 108- 200 mm - second bottom spindle: diameter 108- 200 mm MOTOR POWER: - first bottom spindle 5,5 KW (7,5 HP) - right spindle 5,5 KW (7,5 HP) - left spindle 7,5 KW (10 HP) - first top spindle 7,5 KW (10 HP) - second bottom spindle 7,5 KW (10 HP)

Condition: used, machine/vehicle number: 008157, Max. working width: 250 mm Max. working thickness: 80 mm Hnjdpfjw Sdu Usx Aabou Extraction system: dry Number of painting guns: 4 Use: for paint Number of painting circuits: 1

Condition: excellent (used), Miter punch Hsdpfow Eua Nox Aabonu

Year of construction: 2012, condition: ready for operation (used), Additional Equipment Hydraulic scissor lift tables with max. load capacity 2000 kg, some with feed roller conveyors (conveyor width approx. 80 cm) Hnodpfx Aaow Hh Aysbju This Ligmatech RKA100 was manufactured in 2012. It features a KUKA KR 180-2-PA robot with a reach of 320 cm, complete with a control unit and cooling system, all housed within a protective safety barrier. The system includes a hydraulic scissor lift table from WTT Fördertechnick with a maximum load capacity of 2000 kg. Consider the opportunity to buy this Ligmatech RKA100. Contact us for more information about this machine. Application Types Other Woodworking Machinery

Condition: new, Year of construction: 2025, Simply top - and practically as if by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Behind this is a sophisticated system that allows all production steps to be carried out with maximum precision at maximum speed. Perfect for all logs that are already milled and/or peeled and waiting for their final shape as posts, poles or palisades. Simply point - and practically by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Hnodpfx Aehm S Ruoabou Both models allow three process steps - coping, pointing and chamfering - to be carried out fully automatically at the same time. Without slowing down the production flow: For example, the single-length machine can handle up to 4,000 wood piles and more in single-shift operation. The powerful geared motors run up to top performance via frequency converters - for maximum speed in cutting and cycle time optimization. This has a particularly positive effect when handling different diameters: the processing speed can be easily adapted to the logs.

Year of construction: 2025, operating hours: 24 h, condition: new, functionality: fully functional, empty load weight: 6,500 kg, machine/vehicle number: AVB-68HELIX, Heavy duty and robust body type of wood shaving machine, AVB-HELIX68 wood shaving machines are one of our most popular machines with a higher industrial capacity for the market. Designed to process both logs and offcuts with a minimum material size, this machine is suitable for round log shaving and wood waste processing. It is equipped with T.C.T. carbide blades and also fitted with a hopper pressing system for small pieces and the offcuts (optional). The working principle with a planer blade and carbide blades is available. TECHNICAL DETAILS; TECHNICAL SPECIFICATIONS AVB-68HELIX Number of Cutterheads 6 Length of Cutter Head 80 cm Number of Blades 240 blades/cutter head Power Supply 6 *11 KW = 66 KW (88,5 HP) Hopper Working Hydraulic Hopper Dimensions 2300*800*1100 mm Hnodpfxjidxu Hs Aabou Working Voltage 380 V 50-60 Hz Conveyor Band Motor 1,5 KW Hydraulic Motor 11 KW Total Power 78,5 KW Cutterhead Speed 3000 rpm Cutterhead Diameter 160 mm Shaving Depth 0,2 mm - 2 mm Max.Log Input Length 10-220 cm Max.Log Input Width 10 - 75 cm Working Distance 2400 mm Machine Dimensions L5700 x H1700x W1600 mm Weight 5.600 kg Production Capacity 2000-2500 kg/h

Year of construction: 1997, condition: ready for operation (used), Workpiece dimensions: 150-1000x50-205x35-50mm, end length: 3000-6000mm, connected load: 80kW, length: 15,480mm, width: 5500mm, height: 2000mm, weight: 10.5t, including documentation. Hnedpfx Aaeign Efjbeu

Condition: used, machine/vehicle number: 008142, Type of edging: Thin edge, Thick edge Trimming Unit: yes Hodpfx Aaew R Sbtjbenu Max Panel Length: 80 mm

Condition: excellent (used), 2 units available: Roller - 50 In very good condition. Hnedpfx Aash If Rvobju

Year of construction: 2001, condition: ready for operation (used), This Ligmatech VKV50/K was manufactured in 2001. It features a comprehensive packaging line including a carton erecting machine, carton sealing machine, and angular transfer station. Key components include a scissor lift table, vacuum lifting device, and multiple conveyor belts. Ideal for streamlined packaging operations. Contact us for more information about this machine. Application Types Hnsdpfx Aaew Hh A Hebeu Other Woodworking Machinery

Condition: good (used), total width: 1,950 mm, total length: 4,350 mm, total height: 2,100 mm, Immersion tank from Oswald featuring: - lifting bottom, - hold-down device, - control cabinet with timer control, etc. Hnsdpsvyy T Sofx Aabju

Condition: ready for operation (used), Debarking drum in 3 sections with electrical motors for operate the debarker. Hnedow N Rxbjpfx Aabsu Total length 45 meter Drum diameter 3.8 meter Each drum section 15 meter in length Water bearing system with pump system. Possibility to offer extra debarking sections if more are needed.

Year of construction: 2021, condition: ready for operation (used), Connected load: 18kW, length: 1500mm, width: 600mm, height: 1700mm, weight: 650kg. Hnodpfop Ecgujx Aabju

Condition: used, machine/vehicle number: 006487, X axis working area: 3060 mm Hnedpfx Aaon Rzcljbeu Y axis working area: 1240 mm Working Table: Flat table Main Electrospindle power: 8.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Hsdpfx Aoi E Trpoabenu

Condition: used, machine/vehicle number: 006724, Max width workable: 1200 mm Hnedpfx Aasu A Ev Usbou Max length workable: 1200 mm Max height workable: 1600 mm

Condition: used, machine/vehicle number: 007276, Max. panel width: 800 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Hnjdet H Tx Depfx Aabsu Lifting capacity: 4500 Kg

Condition: used, machine/vehicle number: 007277, Max. panel width: 800 mm Hsdpfxjt H Tyno Aabsnu Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg