Used other woodworking machinery for sale (314)

Condition: used, machine/vehicle number: 008012, Overall length: 6600 mm Overall width: 2150 mm Loading compartment length: 2900 mm Loading compartment width: 1400 mm Giodpfoy Nkqlox Alaju Cutting shaft power: 37 KW

Condition: used, machine/vehicle number: 007243, Max. machinable height: 120 mm Godpfx Asy Nkpbelajiu Maximum machinable width: 230 mm Max. forward feed speed: 12 m/min Operator shafts number: 4

Condition: used, machine/vehicle number: 007275, Max. panel width: 800 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg Gisdpfx Aljt H Tvveaju

Year of construction: 2004, condition: used, functionality: fully functional, Price including with dismantling. Excellent condition. Included in the set infeed centering system with Cambio 66 Gisdpfx Alsyyz Eusaeu and outfeed.

Condition: used, machine/vehicle number: 008271, Max. panel width: 1200 mm Max. panel length: 3200 mm Lifting capacity: 100 Kg Work capacity: 4 Cycles/min Number of controlled axes: 6 axes Gedpfox A Tfcox Alasiu Arm extension: 3029 mm

Condition: used, machine/vehicle number: 004877, Max width workable: 1300 mm Gedpfxswcx Ufe Alaoiu

Condition: used, machine/vehicle number: 006290, Max working width: 1300 mm Max. machinable height: 100 mm Gisdpfx Aju A Evhelaeu No of Rollers: 2

Condition: used, machine/vehicle number: 005107, Stock dimension length: 18800 mm Stock dimension width: 15000 mm Gijdpjiiipuefx Alaeu

Year of construction: 2019, condition: used, Used machine Year of manufacture: 2019 - One print bed with a format of 2500 x 1300 mm or 2500 x 3100 mm (model 2531) - High speed: Prints up to 25 m²/h or up to eight sheets/h (color configuration 4C) in 2440 x 1220 mm format, and up to approx. 12.5 m²/h (color configuration 4C+W) with simultaneous white printing - New ink supply system: The 1-liter ink bottles can be easily replaced from the front — refilling is much faster! - Simple operation — no alignment issues: Equipped with alignment pins and a printed measuring scale for precise media positioning on the print table. The register pins secure the media against shifting. The measuring scale makes it easy to adjust layout and RIP data to the exact position. - Increased flexibility with direct print on thick media: Prints on boards up to 50 mm in thickness - Reduced banding thanks to Mimaki Advance Pass System - Special Mimaki circulation system prevents settling of white ink - Mimaki Clear Control (MCC): For glossy surfaces — to avoid dust adhesion and the formation of small air bubbles, MCC simultaneously reduces ink drying time and UV light exposure. This enables both glossy and stylish matte finishes. In addition, multiple layers of clear varnish can be applied for embossed, multidimensional effects. - Convenient ink options: - LH-100 rigid UV inks for all smooth surfaces with high scratch resistance, color brilliance, and solvent resistance - LUS-150 flexible UV inks for smooth and uneven surfaces, approximately 150% stretchability, making them suitable for a wide variety of substrates - White ink for image backing reduces light transmission Giedpjy Nugqsfx Alaeu - Two-layer printing with white on clear and colored substrates - Print finishing with gloss or matte varnish options - Environmentally conscious printing: No harmful emissions due to UV print technology. Lower power consumption and longer lifespan thanks to UV-LED lamps - RasterLink 6: - Powerful RIP supports outstanding color reproduction - Various print jobs can be easily nested - Simple and user-friendly interface - Intuitive icons help with quick orientation - Thematically related RIP settings are grouped in a single window and can be saved as favorites for repeated use - The print process is monitored directly in the main window - Software can be updated at any time via the internet, and profiles can be downloaded or updated. Printing method: Piezo inkjet Print heads: 2 heads in staggered arrangement Max. print format (W x L): 2500 × 1300 mm Max. media size (W x L): 2500 × 1300 mm Max. media thickness: 50 mm Max. media weight: 50 kg with even weight distribution Print resolutions: 300, 450, 600, 900, 1200 dpi Media hold-down: Vacuum Number of vacuum zones: 2 sections (on the X-axis) Accuracy (absolute): ± 0.3 mm or ± 0.3% of the specified distance (the larger value applies) Repeatability: ±0

Condition: used, Used machine In all operating processes, materials are fed from the front side through the roller gap and bonded together by pressure. Standard number of axes: Material unwinding: 2 Silicone paper unwinding: 1 Gijdpfx Aljy Nugksaju Roller gap adjustment: 0 - 52 mm Pressure: 0.3 - 0.8 N/mm Processing speed: Maximum: 5 m/min Slow operation: 0.6 m/min Reverse operation: 0.6 m/min Noise level: > 70 dB(A) Material data: Max. width: 1400 mm Max. material diameter: Material unwinding: 200 mm Silicone paper rewinding: 150 mm Max. sheet thickness: 50 mm Core inner diameter: 76.2 mm Power supply: 230 V Availability: short notice Location: Röllbach

Condition: used, Used machine Godpfxey Nug De Alaoiu with 2 discs for polishing Disc diameter approx. 500 mm Disc thickness approx. 80 mm Motor 400 V Availability: short-term Storage location: Röllbach

Condition: new, Year of construction: 2021, machine/vehicle number: 218, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OSAI, total height: 8,100 mm, total length: 5,100 mm, total width: 3,400 mm, controller model: OPENkey, spindle motor power: 7,400 W, number of spindles: 4, rapid traverse Z-axis: 38 m/min, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 54 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: CE marking, documentation/manual, We've lowered the price!!! NEW PRICE ONLY €130,000!!! This price is valid only until May 28, 2026! Don’t miss this opportunity! We invite you to purchase a BRAND NEW and outstanding 5-AXIS MACHINING CENTER from the renowned manufacturer FANUM. This machining center is specifically designed for the processing of: - wood, - wood-based materials, Gedpfx Asyn Ri Relasiu - aluminum, - plastics, - composites, - materials of similar hardness (CORIAN, DIBOND, MDF, HPL, HIMAX, etc.). We are offering the latest SIGMA model, which comes exceptionally well-equipped. The machine is entirely new. Attached you will find its specification, describing functions, parameters, and production capabilities. FANUM is a manufacturer known for many years for reliability, precision, high performance, and fast processing speeds. The MACHINING CENTER we offer is BRAND NEW. Purchased from FANUM Sp. z o.o. in 2021, it was delivered to our facility directly by the manufacturer. The only use has been the commissioning performed by the FANUM service team—since then, the machine has not been used. Its condition can be described as completely NEW. Our model is equipped to a very high standard and includes virtually everything you might require. A new comparable device currently costs approximately EUR 282,350 net, which is PLN 1,200,000 net. We have direct contact with and support from the manufacturer, FANUM Sp. z o.o. We can also arrange another start-up inspection and demonstration at our location. If required, we can transport the machine to its new owner, and the FANUM team can install and commission the machine at the new site. The proposed price includes the machine itself, but we can also provide a quotation including transport, installation, and commissioning at the new location. In our opinion, the discount we offer—over 40% (more than €117,640 net, approximately PLN 500,000 net) off the cost of a new machine—makes this a particularly attractive opportunity for anyone looking to expand their machinery fleet or who would not have expected, within their machining center budget, to acquire a modern, new, and highly efficient machine. General sales offer remarks: • Although the machine is NEW, it was manufactured in 2021, and we do not provide any guarantee or warranty; • The machine cannot be returned; • The price shown in the listing does not include VAT (23% will be added to the invoice for buyers in Poland); please check how the price is provided in the advertisement; • Single owner. * The price in EUR is based on the NBP exchange rate – 1 EUR = 4.25 PLN. Welcome to all MACHINESEEKER platform users. We are new to MACHINESEEKER. We are not a furniture, manufacturing, or machinery trading company. We own several properties in Poland and are active as a developer building homes and apartments in Warsaw (the capital of Poland). The machines offered are our property. We acquired them as settlements with tenants in the furniture industry. We know their history and condition, as described accurately in our listings. We maintain contact with the machine manufacturers, who can provide additional support – such as Homag, Otto Martin, OMC Machinery, and FANUM. Since we have no use for these machines, our prices are very attractive—especially as the machines are practically unused. We can assist with logistics and transport throughout Poland or the EU. Inspection prior to purchase is welcome. Kind regards.

Condition: excellent (used), Working length: 90 cm. Engine: 2.2 kW. Giedpfx Aljy Tm Nloasu

Condition: used, machine/vehicle number: 008319, X axis working area: 6380 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Giodpfx Aex A Tc Ielaou Total number of tool changer positions: 32

Year of construction: 2020, condition: new, Type LBM250C Motors 2 x 0.75kW Working length 1300 mm Working thickness 80 mm Transport dimensions 2400x600x1300 mm Gedpfx Aefcg Epjlaeiu Weight 340 kg

Condition: good (used), Type Overture ES Voltage 230 V (50 Hz) Made in USA Transport dimensions 600x400x500 mm Gjdod Ig S Aepfx Alasiu Weight 15 kg

Condition: new, New! Designed for bed slats stress tests. Gjdpfxefftr He Alasiu Power consumption: 230 V The clamping force adjustable from 2 to 10 bar (till 200 kg). Inspection speeds of ~ 44 pcs. / Min. The adjustable length of the product. Simple service. Lamelle test labeled. Marking the label may change.

Condition: excellent (used), Good condition. Ready for work. Gjdpfx Ajy Af Rgelaoiu

Condition: used, We offer this used BUSCK WE250M-4 machine, type butt-end reduce, year of manufacture unknown. Type: WE250M-4 Insulation class/operating mode: S1 Degree of protection: IP55 Rated voltage: 400 V Frequency: 50 Hz Rotational speed: 1480 rpm Rated power: 5.5 kW Rated current: 9.5 A Cos φ: 0.89 Rated voltage (Y): 690 V Frequency (Y): 50 Hz Rotational speed (Y): 1480 rpm Rated power (Y): 5.5 kW Rated current (Y): 5.1 A Cos φ (Y): 0.89 Rated voltage: 400 V Frequency: 60 Hz Rotational speed: 1780 rpm Rated power: 6.3 kW Rated current: 9.26 A Cos φ: 0.88 Bearing: NU314 Gisdpoy Stwmefx Alasu If you have any questions or require additional information, please send us a message or contact us by phone.

Year of construction: 2017, condition: used, Used machine Gjdpsy Ih Rtofx Alajiu Year of manufacture: 2017 Features and technical data: - Automatic cutting plotter with suction zones on the working surface - Automatic cutting table with automatic detection of print images and reference points - The working surface consists of 40 individual vacuum zones that are automatically activated as needed - Multi-tool cutting head for cutting, creasing, and routing materials up to 50 mm thick - Multi-batch cutting capability for processing different substrates simultaneously - Automatic tool presetting - Video projection system for optimizing material yield - Cutting speed up to 102 m/min, acceleration 1.4 G - Automatic height detection of substrates - Working area: 3100 x 2000 mm - Suction zones in working area: 40 - Cutting speed up to 102 m/min Tooling program: - Creasing tool, oscillating knife, router - Elitron CAD & CUT (software) Elipack Availability: Short-term Location: 63934 Röllbach

Condition: used, machine/vehicle number: 007734, X axis working area: 3050 mm Gjdpfjw Idb Hjx Alaeiu Y axis working area: 850 mm Main Electrospindle power: 5 KW Total number of drilling spindles: 19

Condition: used, machine/vehicle number: 005836, X axis working area: 3000 mm Y axis working area: 1000 mm Main Electrospindle power: 3.5 KW Gijdpfxewuckue Alaju Number of controlled axes: 3 axes Total number of drilling spindles: 82

Condition: used, machine/vehicle number: 007289, X axis working area: 3200 mm Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Gjdpfx Aewukyqolajiu Number of controlled axes: 3 axes Total number of drilling spindles: 16

Year of construction: 2019, condition: good (used), 2019 CNC Dynamics Door Centre CNC Router Table Dimensions: 12ft x 5.5ft (working area only; overall machine footprint larger). Maximum Spindle Speed: 24,000 RPM (vertical) and 20,000 RPM (horizontal). Tool Changer Capacity: 12-position carousel. Spindle Taper: ISO30. Tooling Included: 150mm Disc Cutter (10mm cutting width). Leading Edge Cutter (LH) x 2. Roughing Cutter. Spiral Cutter. 8mm Drill. 12mm Drill. S/No. 2019/860 (2019) Giodpfszbr Hqjx Alaju With S & A Chiller, Becker VTLF2.250/0-79 Vacuum Pump, Handwheel & Signal Tower.

Condition: used, functionality: fully functional, Price with dismantling. Drysorter with control system Mitsubishi A2. Drysorter capacity 80 pc/min after rebuild 2021 new control system Siemens S7 1500, ABB580 frequency converters and Finscan 2019 automatic sorter. Drysorter equipped with Dynagrade 2015 (updated 2020). Gijdpfx Aoyzhvvolasu