Used Other welding machines & cutting equipment for sale (172)

Year of construction: 2021, condition: ready for operation (used), A like new plasma cutter is available. Operating hours: 30h, open circuit voltage U₀: approx. 292V, output current I: 105A at 30A 92V–105A 122V at 92 or 122V under 30A, output voltage under load nominal HYP U₂ IEC U₂: approx. 160V at 100 percent power approx. 142–160V depending on standard, duty cycle at 30°C at 80 percent power 105A at X at 40°C, at 100 percent 94A or at other voltages, supply voltage input: three phase 3-PH multiple voltages possible 380–400V etc. U1 50/60Hz, protection class IP23CS, standards EN60974-1 EN60974-10 Class A GOST etc., power consumption P1: 14.9kW/h approx. 14.9kW, duty cycle at 40°C: 80 percent at 105A at certain voltages, 100 percent at slightly lower currents for example approx. 94A at higher voltages, other combinations depending on voltage and standard. Length with handles: 592mm, width: 274mm, height: 508mm, weight with torch 7.6m cable: 45kg. Table with sheet clamp, collection container and rail guide for the plasma cutter optionally available. An on-site inspection is possible. Iodpfsxddaaex Aabjtn

Condition: used, Technical details: load capacity: 800 t total wight: 12,0 / 8,6 t voltage: 380/440 V dimensions L x W x H: 6,9 x1,5 x1,8 m Itjdpfjv A Uziex Aaben dimension L-W-H: 5,8 x 1,25 x 1,25 m Welding positioner 1x mounting bracket with integrated electric cabinet driven 1x rotating mounting bracket Running speed infinitely variable via frequency inverter Clockwise/anticlockwise rotation *

Year of construction: 2010, condition: new, Wire electrodes ELGACORE - MXA 100 Iodpfjhq T Iisx Aabotn 1.4 mm diameter Approx. 60 pieces from stock

Year of construction: 2005, condition: excellent (used), Very good, hardly used Itodpfoxbft Nsx Aabjn

Condition: used, Year of construction: 2009, load capacity: 3,00,000 kg, Model No: SAR 6000 Capacity 300 Rotation & Load Diameter Range 800mm min – 7000mm max Itodpfsvrdagox Aaben c/w Variable Speed Pendant Control Warranty Period : 3 Months Parts Only This is a rare opportunity to purchase three identical sets of the very latest 2009 Bode Self-Aligning Rotators. These machines have had minimum use and are offered in first-class condition. I am confident the first to see these will buy. Each set has the added advantage of having anti-creep fitted to each idler unit. Offered at a huge saving against new we invite customers to view these at anytime at our depot in Oud Castle Netherlands, located approximately 30 minutes from Rotterdam.

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Itsdpfodz Spwsx Aaben Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Connection Voltage: 230 Volt Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications.

Year of construction: 2013, condition: ready for operation (used), 10 identical welding machines are available. Fuse protection: 32A, welding range: 40-350A, open circuit voltage: 18-43V, switch steps: 20, welding current at 100 percent duty cycle (40°C): 260A, length: 900mm, width: 560mm, height: 950mm, weight: 120kg. Standards: EN 60974-1 IEC 60974-1 international standard for arc welding equipment, protection class: IP23, protection against spray water and solid foreign objects smaller than 12mm, suitable for outdoor use, insulation class: H, cooling method: AF air cooling with fan, welding current range: 40A 16V to 350A 31.5V, open circuit voltage U₀: 18-43V, duty cycle at 350A: 50 percent duty cycle 5 minutes welding 5 minutes pause, at 330A: 60 percent duty cycle 6 minutes welding 4 minutes pause, at 260A: 100 percent duty cycle continuous operation possible, mains supply voltage: 3~400V 50Hz three phase, maximum mains current I₁ max: 25A, effective mains current I₁ eff: 18A. They are in good condition. An on-site inspection is possible. Ijdpfx Aoxdc U Asabjtn

Condition: used, Automatic lattice girder welding line TE 30 S made by EUROLLS Model : TE 30 S Maximum stacking height : 500 mm Wire diameter - Upper current (ds -smooth or barbed) : From 4 to 12 mm - Lower current (di- smooth or barbed) : From 4 to 12 mm - Diagonal wire (dg- smooth or barbed) : From 3 to 8 mm Diagonal pitch (P) : 200 mm Beam pitch : 400 mm Maximum speed with hot and cold drawn wire : Max 30 m/min Maximum spool weight in feed : 3000 kg Ijdpfx Aajvtqacebetn Machine type: TE 30 S Maximum stacking height: 500 mm Wire diameter Upper current (ds -smooth or barbed): From 4 to 12 mm Wire diameter Lower current (di- smooth or barbed): From 4 to 12 mm Wire diameter Diagonal wire (dg- smooth or barbed): From 3 to 8 mm Diagonal pitch (P): 200 mm Beam pitch: 400 mm Maximum speed with hot and cold drawn wire: Max 30 m/min Maximum spool weight in feed: 3000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: L4211M3217, laser power: 5,000 W, laser wavelength: 1,030 nm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, The system consists of two identical laser welding units. The system includes the following components: - Trumpf TruDisk 5001 laser source (laser source for both units) - Trumpf disc laser 12-12-30-A32/11 with focusing optics (PFO) - PRIMES FocusParameterMonitor (FPM) for laser measurement and parameter determination - RITTAL SK 3185830 electrical cabinet cooling unit - HERDING Comp 1500-8/9 SB welding fume extraction system - HERDING Multicoater_MCI 55/1 dosing device (for adding additives in the filtration process) Itjdpfx Aexazzmeabjn The system was previously used for manufacturing Li-ion batteries (E-Smart). In this process, cell connectors for series connection in cell blocks were welded. The cycle time for cell blocks in the stated production was 3-4 minutes. The system was professionally dismantled in March 2025. TECHNICAL DETAILS Workpiece height: 40 cm Workpiece width: 40 cm Extraction volume for welding fume extraction: 2,000 m³/h Trumpf TruDisk 5001 - Laser power at the workpiece: 5,000 W - Continuously adjustable power range: 120 W - 5,000 W with active power control - Wavelength: 1,030 nm - Minimum fiber diameter: 100 µm MACHINE DETAILS Weight per unit: 6,021 kg Weight of the Trumpf TruDisk 5001: approx. 900 kg Weight of the cooling device: approx. 300 - 400 kg Rated current: 20 A Connected load: 12 kVA

Year of construction: 1992, condition: good (used), Geuma welding roller set, welding positioner set type GRS-SPE in neat good working condition Itedpfolzcibsx Aabjn consisting of: 1 x driven 3 x guide wheels Specifications: - 7 kW - max capacity 31 tons - diameter idlers 550mm - width 2 wheels side by side 950mm - center of wheels from under frame 340mm - maximum adjustable width 2500mm

Condition: used, Year of construction: 2018, functionality: unexamined, machine/vehicle number: 87874 DS, power: 10 kW (13.60 HP), Arnold stapling station: Max. Back-up fuse: 63 A Mains connection: 3 x 400 VAC + N + PE Power: 10 kW Control voltage: 24 VDC Itjdpfx Ajrvyrbeabon Incl. KLH Kältetechnik W05.HL3 and Trumpf TruPulse 103

Condition: good (used), For sale: Industrial powder feeder for thermal spray systems, Sulzer Metco brand, model 9MPE DJ Closed Loop Powder Feed Unit. Equipped with powder hopper, rotameter, controller with keypad and display, as well as alarm and diagnostic functions. Specifications: Power supply: 115 / 215 / 230 V Frequency: 50 / 60 Hz Power consumption: 0.82 kW Single-phase supply Year of manufacture: 2000 Nameplate model: 1002 9MPE DJ Local/remote switch Outlets for carrier and inert gas Glass chamber with feeder and air vibration Condition: Very good, complete, fully functional Used in Oerlikon Metco system Documented maintenance in 2017 and 2018 Manufactured in USA, Hicksville NY Itodpfx Asu S Tgdjaben Ideal for industrial applications such as thermal spraying, metalizing, flame spraying, and protective coatings.

Year of construction: 2018, condition: ready for operation (used), 5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal overload protection, central connection socket for welding torch. An on-site inspection is possible. Isdpfxexdda Ho Aabotn

Condition: good (used), Fully automatic sheet dispenser PAL-Cut 800 The Palcut 800 cuts paper quickly and precisely into interleaves of the desired length, directly from the roll. Fully automatic cross cutter PAL-Cut 800 Sheet dispenser that cuts interleaves quickly and precisely to the desired length. The sheet dispenser is suitable for continuous operation in an automatic palletizing system and for companies with high sheet consumption. The Palcut 800 works with rolls up to 800 mm wide. Type designation: PAL-Cut 800 Length: 1853 mm Width: 1380 Height: 1739 For roll widths up to: 800 mm Pick-up height: 1,368 mm Working speed: 480 pieces/hour Power connection: 220 V, 0.18 kW Operating mode: fully automatic Weight: 370 kg Link PAL-Cut 800 Itsdpfx Aoxamyhsabon You can find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 2018, condition: ready for operation (used), 3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site inspection is possible. Itsdpfx Aasxdda Tsbon

Year of construction: 2021, condition: ready for operation (used), 20 identical welding machines are available. Type: cool41 U31, standard: IEC 60974-1, -2, -10 C.L.A, mains voltage: 400V, frequency: 50/60Hz, protection class: IP23, power consumption P min: 0.9kW, cooling capacity P max: 0.35MPa (3.5bar), max. current consumption: 2.5A, length: 539mm, width: 210mm, height: 415mm, weight: 22kg. Control: Comfort 2.0 with intuitive operation via click wheel, pulse spot normal mode continuously adjustable (especially for TIG welding), pulse pause ratio (balance) adjustable for example from 10-90%, Hz and kHz pulses up to approx. 15kHz, ActivArc technology dynamic arc control to ensure constant performance despite distance fluctuations and to prevent electrode sticking, improved root and penetration quality, spotArc Spotmatic functions for spot welding and tacking, 2-stroke and 4-stroke mode depending on torch trigger operation, manual metal arc welding often with MMA pulse automatic also integrated, gas pre-flow and post-flow times adjustable, upslope and downslope times also controllable, torch modes via torch trigger such as reduced secondary current, memory and job storage recurring welding tasks can be saved depending on version approx. 8-100 jobs, energy efficiency high efficiency, standby function available. Remote control and interfaces remote adjusters and functional torches can be connected, optional LAN WiFi gateway ewm Xnet, PC interfaces for parameter setting and monitoring. Very little used. An on-site inspection is possible. Isdpfx Aoxdc Upeabstn

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Iodpoxddamefx Aabetn

Year of construction: 2009, condition: ready for operation (used), Laser power: 4kW, working area X/Y/Z: 4000mm/2000mm/115mm, max. sheet thickness mild steel/stainless steel/aluminium: 20mm/15mm/10mm, max. workpiece weight: 1700kg. Machine dimensions X/Y/Z: approx. 11600mm/5300mm/2200mm, weight: approx. 15000kg. Includes Trumpf Liftmaster. Documentation available. An on-site inspection is possible. Itodpfxoxbhgxj Aabsn

Year of construction: 2003, condition: ready for operation (used), Travel path X/Y/Z: 3000mm/1500mm/115mm, laser power: 5000W, cutting capacity mild steel/stainless steel/aluminium: 25mm/20mm/12mm, travel speed: 200m/min, cutting accuracy: 0.1mm. Machine dimensions X/Y/Z: 11000mm/4600mm/2400mm, weight: 12000kg, control: Siemens Sinumerik 840D. Includes conveyors, laser cutting heads with various lens sizes, Liftmaster R, and other peripheral equipment. Documentation available. An on-site inspection is possible. Iedpfx Asxaph Ujabstn

Year of construction: 2008, condition: ready for operation (used), A complete plasma cutting system Oerlikon including peripheral equipment is available. 1) CNC plasma cutting system Oxytome 30, year of manufacture: 2008. 2) Plasma source Air Liquide Nertajet HP125, year of manufacture: 2008. 3) Filter unit Donaldson Torit DCE DFPRO 8-Cyclo, year of manufacture: 2008, weight: approx. 1625kg. 4) Cooling unit Air Liquide Friojet-30, year of manufacture: 2008, cooling capacity: 2kW, max. operating pressure: 29.5bar, refrigerant: R407c, weight: 80kg. Documentation available. An on-site inspection is possible. Itjdpjw U T Upofx Aaben

Year of construction: 2000, condition: ready for operation (used), Gun: PH-3N, voltage: 400V, weight: 50kg. Supplied with operating manual, 2x ground cables with clamp BMS/BMK, gas connection, HZ-stud holder, adapter piece and key. An on-site inspection is possible. Isdpfxow Tl I Es Aabjtn

Year of construction: 2012, condition: ready for operation (used), The plant was set up once in 2012 and then dismantled and put into storage, includes Anti-Drift Device Oerlikon ADVi 40x45 So and Section Assembly Line Oerlikon RB-AFV/FV 7500 So, with documentation, no videos available, can be inspected on site in stored condition. Ijdpfepu A D Usx Aabstn

Year of construction: 1998, condition: ready for operation (used), Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. Iodpfoi A Ix Hsx Aabjtn

Year of construction: 2011, condition: ready for operation (used), System includes (1) Industrial Robot KUKA KR 150-2 2000 (2) Spot Welding System SPATZ (3) Camera Inspection OMRON (4) Light Barrier SICK, operational hours counter: 2602h. Isdpegqkpmsfx Aabstn

Year of construction: 1990, condition: ready for operation (used), With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible. Iodpfeq Ttz Nex Aabotn