Used other welding machines & cutting equipment for sale (169)

Year of construction: 2009, condition: ready for operation (used), A CNC CO2 laser cutting machine Amada with automated storage system LKI is available. 1) Laser power: 4kW (4000W), travel X/Y/Z: 3100mm/1550mm/100mm, max. table load: 920kg, max. material thickness steel/stainless steel/aluminum: 20mm/12mm/10mm, laser system dimensions X/Y/Z: approx. 10000mm/4300mm/2100mm, weight: approx. 11000kg. 2) Pallets: 8, cutting pallets: 2, raw material: 2/3, unloading: 4/3, max. unloading height: 2200mm, max. material dimensions X/Y: 3050mm/1525mm, min. sheet dimensions: 2000mm/1000mm, height: 5400mm. Documentation available. On-site inspection is possible. Rcjdpfx Afev Rp S Sohjd

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Rcjdpfev Ip R Aox Afhsd

Year of construction: 2013, condition: ready for operation (used), An IPG laser source with peripheral equipment is available. 1) IPG Laser YLS-3000-CT, year of manufacture: 2013, wavelength: 1070nm, modulation: 0kHz-5kHz, power control range: 10%-100%, power stability: +/-1%. Machine dimensions X/Y/Z: approx. 800mm/800mm/560mm, weight: approx. 400kg. 2) Industrial chiller IPG Laser LC 170.01-A.3.5, year of manufacture: 2013, cooling capacity: 17kW, max. operating pressure: 28bar, refrigerant: R407C, refrigerant quantity: 3.5kg. 3) Wire feeder Dinse DIX WD 300, feed rate: 20m/min, wire diameter range: 0.8mm-1.6mm, machine dimensions X/Y/Z: approx. 300mm/250mm/250mm. 4) Laser process head. Documentation available. On-site inspection is possible. Rcjdsx H S Nwepfx Afhod

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Rsdpfjxddamox Afhscd

Condition: used, functionality: unexamined, Semi-automatic transformer core welding machine with ESS stacking units SGE 30 - 84 No. 90101565, SGI 30 ß 84, tooling on the machine EI 84. The stacked sheets are pushed into the machine using the coil, welded and inspected during transport out of the machine. ESS welding equipment with wire feed. Rcjdeyqmt Dspfx Afhed

Condition: used, functionality: unexamined, No. 453 Ess TM 30-151MS-1/2 No. 7/0501 Tool EI 84, BI210770 No. 454 Grau ASM 30-60 1990 No. 7.040.90, EI 30-60, BI210790 No. 455 Ess TM 30-122 Tool EI 66 TM 30-122 /S1/2-2/N4, No. 82/0701, Control PLS 510/MS54/82/0702 No. 456 Grau ASM 60-120, 1988, No. 8.020.88 BI210810 No. 457 ESS TMR /IA/S4/30-84 EI 84 Rotating table No. 83, Control type PLS 53, No. 83, Tools EI 48, 54, 60, 66, 84, 66/84 No. 478 Waasner TKSM/H No. 5709 EI 66, Cooler and transformers missing No. 479 Waasner TKSM/H. No. 5519 EI 66, Cooler and transformers missing No. 480 Ess TM 30-151 MT-MS-40-4 No. 9/1105 9/1106 1979 MIG / MAG Tools EI 66, EI 78 Rjdoyntu Aspfx Afhjcd

Year of construction: 2023, condition: new, Rotating device for handling components weighing up to 40,000 kg. Component diameter range: 500 mm to 6,000 mm. Rotation speed: 100 to 2,000 mm/min. Rcjdpfxjflmcxj Afhed Control via handheld remote control (optional: wireless).

Year of construction: 2023, operating hours: 0 h, condition: new, H- & M-Series is suitable for cutting your rebar to the desired length. H-Series (hydraulic): H26, H38S, H45S, H55, SH60 M-Series (mechanical): M36, M45, M55 Product information: - Voltage: 380 V (16 A) - Motor Power: 2,2 kW - 7,5 kW - Adjustable blade stopper - Silent, safe and environment friendly - Less maintenance - Long product life - Ideal for your construction company or also for your construction sites - Cutting capacities depending on steel strength according to table (see pictures) - Included in accessories: 1x additional blade, 1x allen key - Hydraulic Oil Tank Capacity: 12,5 lt. - 35 lt. (HLP32) | SH60: 163 lt. - Net weight: 120 kg - 960 kg Mechanical: - 0,8 sec. cutting time - High cutting performance Rjdsm Shxijpfx Afhecd - Foot pedal and arm control Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Year of construction: 2026, condition: new, MATRIX55S is suitable for cutting your rebar to the desired length (optional available with Synclone45S, Doublebender). Product information: - Hydraulic Motor: 7,5 kW - Synclone45S is optionally available for double bending - 360° swiveling digital control panel - Barcode system optional available - Total weight: 5200 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us! Rcsdpfx Afem Tqazshed

Condition: ready for operation (used), 1 x ENABL SAW circumferential seam C&B, including 1 welding head with 3 wires. Welding range: ø6.5 to ø11 m. Expandable up to ø13 m. 1 system. Redpfx Afeyt Rmgohscd Already disassembled without power (currently likely without PSU, but a PSU may be available). Inspection welcome north of Flensburg. B2B sale only.

Year of construction: 1992, condition: good (used), Geuma welding roller set, welding positioner set type GRS-SPE in neat good working condition consisting of: 1 x driven 3 x guide wheels Specifications: - 7 kW - max capacity 31 tons - diameter idlers 550mm - width 2 wheels side by side 950mm - center of wheels from under frame 340mm - maximum adjustable width 2500mm Rcedpfx Afslzcibjhed

Year of construction: 1991, condition: ready for operation (used), Dalex DR-F 2 0.35 m³/h 220 Volt Rsdpfx Afoftbtmohocd No. 109115732 Year of manufacture 1991 Refrigerant R12 – needs to be refilled.

Year of construction: 1989, condition: good (used), For sale is a fully functional welding positioner from APS. Model 1000 E Year of manufacture: 1989 Rjdpfx Afecl Ttvshocd Machine number: H1-008 Speed range: 0.3-1 rpm 64mm hollow shaft Tilts left and right approximately 135° Space requirement: approximately 1700x1700mm Weight: 750kg

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Rodpfeyx Hpijx Afhjcd Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine.

Condition: good (used), Fully automatic sheet dispenser PAL-Cut 800 The Palcut 800 cuts paper quickly and precisely into interleaves of the desired length, directly from the roll. Fully automatic cross cutter PAL-Cut 800 Sheet dispenser that cuts interleaves quickly and precisely to the desired length. Rodpfx Afjxamyhshocd The sheet dispenser is suitable for continuous operation in an automatic palletizing system and for companies with high sheet consumption. The Palcut 800 works with rolls up to 800 mm wide. Type designation: PAL-Cut 800 Length: 1853 mm Width: 1380 Height: 1739 For roll widths up to: 800 mm Pick-up height: 1,368 mm Working speed: 480 pieces/hour Power connection: 220 V, 0.18 kW Operating mode: fully automatic Weight: 370 kg Link PAL-Cut 800 Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Year of construction: 2009, load capacity: 3,00,000 kg, Model No: SAR 6000 Capacity 300 Rotation & Load Diameter Range 800mm min – 7000mm max c/w Variable Speed Pendant Control Warranty Period : 3 Months Parts Only This is a rare opportunity to purchase three identical sets of the very latest 2009 Bode Self-Aligning Rotators. These machines have had minimum use and are offered in first-class condition. I am confident the first to see these will buy. Redjvrdagepfx Afhocd Each set has the added advantage of having anti-creep fitted to each idler unit. Offered at a huge saving against new we invite customers to view these at anytime at our depot in Oud Castle Netherlands, located approximately 30 minutes from Rotterdam.

Year of construction: 2025, operating hours: 300 h, condition: like new (used), Equipment: CE marking, TECHNICAL DETAILS: Drive Unit: Model: VM800T. Maximum load capacity: 400 t. Turning capacity: 800 t. Maximum speed: 108 cm/min. Minimum speed: 20 cm/min. Maximum diameter: 8,000 mm. Minimum diameter: 2,500 mm. Length: 6,360 mm. Width: 1,544 mm. Height: 1,565 mm. Weight: 15,300 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Wheels: Steel, Ø 950 x 350 mm. Power: 2 motors of 7.5 kW with primary epicyclic gearboxes and secondary worm gearbox. Idler Unit: Model: VC800T. Maximum load capacity: 400 t. Maximum diameter: 8,000 mm. Minimum diameter: 2,500 mm. Length: 5,852 mm. Width: 1,500 mm. Height: 1,565 mm. Weight: 12,720 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Rjdoy Ex D Sspfx Afhocd Wheels: Steel, Ø 950 x 350 mm.

Condition: excellent (used), functionality: fully functional, TPS/Miller/Keyplant 6m Pipe Cladding Weld Overlay System Twin head with AVC Rcjdpfx Afou Hfkmohod Miller Maxstar 700 power sources Miller Maxstar DX 200 hot wire power sources New Heavy duty water cooling unit (Chiller) Heavy duty Hollow Bore Head Stock Pipe diameter clamping range 150mm-750mm

Condition: used, SOLID STATE HF WELDER EFD INDUCTION WELDAC 250 kW Rjdpfoymak Usx Afhocd SCOPE OF SUPPLY 1. Complete welding unit EFD Weldac 250Kw 2. Input Autotransformer 3. Complete cooling unit and water circuit 4. Control desk with PC 5. Existing documentation 6. Output busbar TECHNICAL DATA Manufacturer EFD Induction Model WELDAC 250 Nominal power (output power): 250kW Welding-Frequency (nominal): 250 -310Khz Total installed power: 346KVA Nominal power: 250 kW Welding frequency range: 250 -310 kHz Total installed power: 346 kVA