Used processing- and subsequent machines for sale (63)

Year of construction: 2010, condition: ready for operation (used), A CO2 laser cutting and marking machine Eurolaser, which was used for acrylic glass, is available. Laser power: 200W, working dimensions X/Y: 2270mm/1600mm, max. cutting width: 2200mm, material feed width: 2350mm, table feed-through height range: 58mm-80mm, engraving resolution: 1200dpi, grayscale levels: 256, material processing: films/textiles/plastics/composite materials/paper/thin wood. Machine dimensions X/Y/Z: approx. 4000mm/2350mm/1600mm, weight: approx. 2000kg. The laser source was renewed in 2021. Documentation available. An on-site inspection is possible. Bsdpfx Ajyviyrol Sewn

Year of construction: 2020, condition: good (used), Hot glue gun dispenser, glue pump, melting machine, glue melter, melting oven, hot glue gun, glue binder Bwsdpfx Alsygtnys Sjn -Manufacturer: Nordson, VersaBlue melting device with accessories -Type: VB_ENG -Pumps: 3 gear pumps -Accessories/individual components: see photos -Dimensions: 1070/760/H1380 mm -Total weight: 330 kg

Condition: used, Year of construction: 2010, functionality: fully functional, Machine data • Gantry-type machine with stationary table and moving bridge for minimal footprint • Base, bridge, and bridge columns made of steel, welded in one piece, stress-relieved and machined • Main structural components consist of ribbed welded assemblies, optimized for the best possible rigidity-to-weight ratio, vibration damping, and high acceleration • Every machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table enables simple loading and unloading with a forklift or overhead crane • Precision ground linear guides with high preload and additional cover strip on all axes for optimal chip protection • Brushless digital A/C servo motors and controllers on all axes • Single-sided (centered) drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screw spindle with double bearing support on Z-axis • Precision planetary gearboxes with minimal backlash • Fully enclosed cable drag chains to protect cables from chips and dust • High-quality shielded cable drag chain wiring for maximum reliability against interference and downtime • X-axis machining area: 1,540 mm • Y-axis machining area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 240 mm • Network connection via Ethernet Bwedpjybb N Isfx Al Sen • Remote maintenance via Internet FlexiCAM control system • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM • Simple operation via handheld control unit with display Spindle with manual tool change • Power consumption: 5.6 kW • 5,000 to 24,000 RPM, infinitely programmable • Cooling via integrated electric blower Dust extraction for manual tool change • Hose connection diameter: 120 mm Work table • T-slot profiles Safety features • CE compliant according to DIN EN 13849 • Includes EMC filter, Emergency Stop • Light curtain system controlled by the machine controller

Condition: used, Year of construction: 1973, KRUPP FS-74 Cutting Machine - incl. dual brake unit (250kg) Bjdsytcw Rspfx Al Sswn - incl. drive system - speed control - winding monitor The system is available twice. (price per unit) Please note that the machine must be dismantled, packed, and collected by the buyer.

Condition: new, Year of construction: 2026, rotational speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composite materials such as CFRP / GFRP, model-building materials, aluminum Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary, boatbuilding, automation Reference number: 1221 Availability: April 2026 Bwedpfsx Uw Stex Al Sen Model: 5-axis CNC milling machine G-S-F/B (25-13) Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Workpiece dimensions X/Y/Z: 2,500 x 1,300 x 600 Control: SIEMENS – Sinumerik One with HT 2 handheld terminal Tool changer: 13 tools Tables: 1 rotary table Vacuum system: yes Tool breakage and length detection: Renishaw TS 27 R Other: upon request Year of manufacture: 2026 Condition: new

Condition: new, Year of construction: 2026, rotational speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise machining with high output Materials: Plastics, composites such as CFRP/GFRP, model-making materials, aluminum Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary engineering, boatbuilding, automation _____ Reference number: 1221 Availability: April 2026 Model: 5-axis CNC milling machine G-S-F/B (25-10) Spindle data: 8 kW / 6.4 Nm; 1,000-36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Workpiece dimensions X/Y/Z: 2,500 x 1,000 x 600 Control: FANUC Tool changer: 13 tools Tables: 1 rotary table Bodox S E Nbjpfx Al Sown Vacuum system: yes Tool breakage and length control: Renishaw TS 27 R Miscellaneous: on request Year of manufacture: 2026 Condition: new

Condition: excellent (used), Model: 4M/65E Condition: Very good Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. - Router (no sanding attachment) - Speed regulation on slide. - Works great Bwodpfx Alexz Tfas Sjn

Year of construction: 1999, condition: ready for operation (used), A Ferrarini & Benelli corona pre-treatment system for surface activation of non-conductive materials in continuous production processes is available. Generator type: C15/4N, output frequency: 15kHz, electrode design: multi-cylinder roller electrodes, max. treatment width: 200mm. An on-site inspection is possible. Bwjdpfx Ajyn N Avsl Sjn

Condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor Bjdpfop A A Rrjx Al Sown -Manufacturer: simar, granulate conveyor vacuum conveyor with 2 hoppers -Type: F2582 -Item no.: 10-02082 -Housing: material VA -Individual components/dimensions: see photos / technical. drawing -Total dimensions: 870/710/H1430 mm -Weight: 80 kg

Condition: used, Injection molding cutting device for injection molding machine, injection molding machine, cutting pliers -Cutting device: for cutting plastic sprues, tabs, overflow cavities, webs, etc. Bsdpfxetrbaco Al Sewn -6 Cutting pliers: Cutting insert/individual components see photos -Price: complete -Total dimensions 1570/770/H680 mm -Weight: 49 kg

Condition: good (used), Knife holder, shear knife holder, scissor cutting holder, cutting knife holder, scissor slot holder, scissor knife holder -Manufacturer: Dienes, pneumatic cutting blade holder -Type: PSG -Part No.: 245AA50002001 Bjdpfx Asxw Uubjl Sown -Blade diameter: 130 mm / 5.118 inches -Dimensions: see photos -Number: 2x shear blade holders available -Price: per piece -Dimensions: 320/70/H145 mm -Weight: 4 kg/pc.

Condition: good (used), ring cutting machine, cutting device, cutting pliers, cutting machine, ring, disc, segment and strip cutting machine, ring cutting machine Bwedpfx Alsvunugo Sjn -Manufacturer: Klinger, ring cutting machine -Cutting range: 80 - 1250 mm -Cutting thickness: up to 9 mm -Dimensions total 1100/170/H280 mm -Weight: 6.4 kg

Condition: good (used), Granule dryer, granulate drying plant, granulate conveyor, vacuum conveyor -Manufacturer: Digicolor, granulate conveyor vacuum conveyor -Type: unfortunately without type designation -Housing: Material VA Bedewuppkjpfx Al Sewn -Individual components/dimensions: see photos -Dimensions total: 260/250/H830 mm -Weight: 13.6 kg

Year of construction: 1999, condition: good (used), Granule dryers, compressed air dryers, continuous dryers, granule drying systems Bwsdpfxjlb Iv Ne Al Sjn -Manufacturer: digicolor, Granule dryer type Dehumidifying Dryer -Model: DT 204 M -Power: 10000 W -Side channel blower: Siemens Elmo-G 1.5 kW -Individual components: see photos -Dimensions: 1020/610/H1550 mm -Weight: 241 kg

Condition: good (used), Welding iron -Welding bar: for welding plastics, from mask manufacturing machine -Thermal panels/air nozzles: 2 each -Dimensions: see photos -Number: 3x hangers available Price: per piece -Dimensions: 240/100/H55 mm -Weight: 0.7 kg/pc. Bwedjxwlxwspfx Al Son

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 6,000 rpm, table load: 15,000 kg, Fully operational condition + regularly serviced by the machine manufacturer The machine was built in 1998. In 2017, the control system was completely renewed for approximately €40,000! Bjdsw N Nnbjpfx Al Sewn TECHNICAL DETAILS X-axis: approx. 5,000 mm Y-axis: approx. 2,500 mm Z-axis: approx. 1,250 mm Control unit: Fidia CXR with handwheel – new from 2017 Clamping table dimensions: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle type: hollow milling spindle with 78/8 flange and locknut Milling spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: ER40 collet chuck Tool release: manual Note: For approx. €10,000, a spindle upgrade kit can be retrofitted (cables & adapter plate included): Spindle speed: 24,000 rpm Tool holder: HSK63F Power: 10 kW Torque: 8.7 (S1) and 10.5 (S6) A new 6-position tool changer can also be purchased in combination with the spindle upgrade (approx. €4,000). MACHINE DETAILS Connected load: approx. 28 kW Main fuse: 63 A Installation space required: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg

Year of construction: 2006, condition: excellent (used), Description to follow! Bwodpfx Aljxy S Ece Sjn

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 010199, input voltage: 220 V, height adjustment type: electric, total length: 4,820 mm, overall weight: 5,000 kg, total width: 3,760 mm, total height: 2,395 mm, control cabinet height: 1,627 mm, control cabinet length: 550 mm, control cabinet width: 550 mm, electrical fuse: 10 A, input frequency: 50 Hz, For sale: CNC Foam Cutting Machine - RAM SLC 499 SUPERFAST. Year of manufacture: 2006. Regularly serviced and fully operational. The machine is in continuous use – testing on site is possible. Cutting dimensions: a-2200 c-2200 h-1300 Transport to your specified address can be arranged. Bwedeyaxrkopfx Al Son For more information, please contact by phone only: 508388091

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 2,200 mm, total length: 3,100 mm, total width: 2,200 mm, power: 3 kW (4.08 HP), We offer this very good Blackman and White Versatech Cutting Machine, year of construction 2017. 2.2 x 3.1mtr conveyorised bed, with on board 3kw water cooled router and drag knife, with iCut camera registration system. Can be seen fully working and tested in Leicester UK. Price is ex works, we can put you in touch with the engineer who will provide a seperate and direct cost to move the machine. Bjdpfx Asx Ik Dcsl Sewn If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Hot glue gun dispenser, glue pump, melting machine, glue melter, melting oven, hot glue gun Bjdpsx Nftbofx Al Sjwn -Manufacturer: Nordson, Adhesive Melting Gun -Type: 2302 -Part No.: 276239 -Transport dimensions: 570/400/H530 mm -Total weight: 35 kg

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SCI-H21113, • Circumferential cutting by knife • From Ø32 up to 125 mm • For PVC and PE pipes • Centralized pneumatic clamping • Electric carriage movement • Pneumatic knife clamping Bwodoyn Rdzopfx Al Sjn • Up to 15 m/min

Year of construction: 2011, condition: ready for operation (used), Max. working length: 2000mm, compressed air supply: 6bar, connected load: 1200W, the machine was hardly used. Bodpfxelc N Spj Al Sown

Condition: good (used), Year of construction: 2000, IPM inline pipe saw TP400 up to D=400mm Bwjdpfx Asvzrcbjl Sjn

Condition: used, Year of construction: 1999, Planetary saw for pipes 63-400mm Bwedpfxovzrlis Al Sjn

Year of construction: 2008, condition: good (used), GRAEWE PS500 inline pipe saw up to D=500mm Bedpsvzq Uijfx Al Sjwn