Year of construction: 2013, condition: ready for operation (used), A gas cylinder transport pallet Denios is available. Number of cylinders: 4, max. cylinder diameter: 230mm, load capacity: 300kg, max. cylinder volume: 50l, material: PE-LLD, fork pocket width: 170mm, fork pocket height: 80mm, dimensions X/Y/Z: approx. 1150mm/600mm/1100mm, weight: approx. 30kg. On site inspection is possible. Fjdpfxjyfhl Ds Afpepc

Year of construction: 2016, condition: ready for operation (used), A Servus Intralogistics conveying system for PET canisters is available. Documentation available. An on-site inspection is possible. Expected to be available from 2026. Fpodjxbrx Eopfx Afpoc

Year of construction: 2020, condition: ready for operation (used), Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible. Fpjdpexcx Amefx Afpsc

Condition: excellent (used), Year of construction: 2000, A receiving conveyor with steel hinged plate belt. It was most recently loaded using a wheel loader and a tipper truck. Overall length: 9.6 m Filling hopper dimensions: 8.0 x 3.6 m Conveyor width at bottom: 1.85 m Maximum width with drives: 3.2 m Conveyor belt width: 1.3 m Overall height: 5.3 m Belt speed: 0.05–0.29 m/min Conveyor chain: FV 315 with bushing and protected roller Fjdpfxsiwxmbo Afpspc Throughput: 3 to 14 m³/min Belt gear motor SEW: 0.75 kW Speed: 0.2 rpm Torque: 18,000 Nm Reel shaft speed: 64 rpm Reel gear motor Flender: 7.5 kW Total weight: approx. 20 tonnes With steep-angle conveyor belt

Year of construction: 2026, condition: new, Robust Steel Construction – Designed for Continuous Operation The basic structure consists of a stable construction steel frame, manufactured from laser-cut, bent, and welded components. The surface features a high-quality RAL0208 powder coating. Modular Design: Our conveyor belt frames are available as transportable sections. This makes the system: • Easy to transport and assemble • Extendable or shortenable at any time • Ideal for future modifications or system adaptations Conveyor Technology & Carrying Rollers The carrying roller construction in the lower run is designed for smooth and reliable operation: • Shaft diameter: 60/15 mm • Roller station spacing: approx. 500 mm (customizable) • Closer roller spacing in the infeed area available on request for higher load capacity Drive & Rollers The drive drum and return drum are made of S235 steel, welded and precisely machined: • Ø 220 × 700 mm, crowned and finish-turned • Shaft secured with tension bearings • Bearing positions with robust UCF flange bearings, including lubrication nipples Drive Unit: • Hydromec worm gear motor, 1.1 kW • Belt speed: approx. 1.15 m/s • Connection: 400V / 50 Hz, protection class IP54 • Drive supplied ready for wiring to motor terminal box (commissioning must be carried out by a qualified electrician) • Motor mounted on the right, pull configuration in the conveying direction Conveyor Belt A durable, industrial-grade belt is used: • DM EP250/2, 3+1.5 cover • Chevron profile 17 mm high, 650 mm wide • Profile-free splice area • Endless hot vulcanized Custom Options & Accessories (depending on requirements) The modular design allows all components to be precisely adapted to your process, such as: Fpjdpfxeyhznno Afpjc ✅ Special lengths & widths ✅ Side plates / wave edges (for lateral guidance and increased conveying stability) ✅ Infeed plates / feed plates (wear-optimized, material-friendly) ✅ Feed/infeed hoppers (for clean loading of bulk material) ✅ Discharge plates / discharge chutes ✅ Cleat profiles / alternative belt specifications ✅ Adjustment of roller spacing & carrying roller geometry ✅ Special coatings / custom designs

Year of construction: 2026, condition: new, DM Flat Conveyor Belt Type FB-700 without substructure for bulk material conveying Conveyor belt length: 6,000 mm Belt width: 650 mm Fabricated from structural steel, laser-cut, bent, and welded Base frame powder-coated in RAL 5015 Modular conveyor belt frame construction / sections available in transportable lengths. Frame structure extendable or can be shortened at any time. Carrier roller system on the return strand, shaft Ø60/15 mm Roller station spacing approx. 500 mm (custom options possible) Closer roller spacing in load area Drive drum + tail drum made of S235 steel, welded and machined Ø220x700 mm crowned, shaft fixed with pillow block bearings. Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/sec Connection 400 V, 50 Hz, protection class IP54 Drive supplied prewired to motor terminal box (Commissioning must be performed by a qualified electrician) Motor mounted on right side in direction of transport, pull configuration. Bearing points equipped with robust UCF flange bearings incl. grease nipples. Rubber conveyor belt DM EP250/2 3+1.5 cover Chevron profile, 17 mm high x 650 mm wide Fjdpfxeyhznho Afpspc Joint section without profile, endlessly hot vulcanized

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Fsdpfjyhzhnjx Afpspc Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: like new (used), Year of construction: 2015, operating hours: 30 h, functionality: fully functional, NORD 9092.1/52 180TC2-112MH/4 SK9092.1/52-11 - Motor speed: 1,440 rpm - Reduction ratio: 2,116.80 - Number of gear stages: 5 - Output speed: 0.680 rpm - Service factor: 0.60 - Output torque (Nm): 56,150.00 - Rated motor power (kW): 4.000 - Motor supply voltage (V): 400/690 - Rated frequency (Hz): 50 Fsdpfx Ajxvbxdsfpspc - Efficiency class: IE3 - Duty type: S1 (continuous operation) - Motor protection class: IP55 - Motor insulation class: F - Rated current 1 (A): 7.85 - Rated current 2 (A): 4.53 - Power factor (cos φ): 0.83 - Mounting position: M1 - Mounting type: Foot-mounted (Na feet) - Output shaft position: Side A - Output shaft dimensions (mm): 140x250 - Automatic breather - Shaft seal type: Double shaft seal - Motor thermal protection: PTC sensor, 3x155°C - Motor connection: Delta - Motor terminal box position: 1/I - Gear oil type: Mineral ISO VG 220 - Oil capacity (l): 41.000 - Gear oil type (secondary): Mineral ISO VG 220 - Oil grade: CLP 220 - Secondary oil capacity (l): 3.000 - Paint color: RAL 5010 - Paint system: Standard - Paint coating: Basic - CE Mark: Yes - CCC mark: None - NOM (Mexico Certification): No - UL Certification: No - CSA Certification: No - DoE CC: No - CSA Energy Verified: No - High Efficiency (Alto Rendimento): No - Korea Energy Label: No - Cable glands: CG M32X1.5 PA6 GASKET Note: All technical data complies with professional standards and is presented in an industry-specific format for machinery and commercial vehicle listings.

Condition: good (used), Year of construction: 2020, Gear motor - Nord Drivesystems - 0.75kW - 4rpm Fpjdpfxev Uh S Ej Afpjc - Type SK 9043.1VF-80LP/4 - 2020 -Weight 160kg - Price per 1 pc.

Condition: excellent (used), I sell a Lukas baler in very good condition. Fsdpfxjum Htzo Afpopc

Condition: new, • KSB / amri BOAX-SF butterfly valve • Diameter: DN200 • Working pressure: PN16 • Seal: EPDM (for water, HVAC, industry, fire protection) • Temperature range: up to 130°C • Material: ductile iron with epoxy coating • Actuation: manual lever with locking positions • Valves unused, stock item, year of manufacture 2021 • Ready for operation, 100% functional • Ideal for water, industrial, hydrant, and fire protection installations. - PRICE LISTED PER VALVE. Fjdpfx Afoxyq Icspepc

Condition: excellent (used), For sale: Original J.D. Neuhaus PROFI pneumatic hoist, model LN-1T, with a lifting capacity of 250 kg (0.25 t). Manufactured in Germany in 1991 by J.D. Neuhaus Hebezeuge GmbH & Co., Witten-Heven – a global leader in pneumatic lifting systems. Technical specifications: • Model: PROFI LN-1T • Lifting capacity: 250 kg (0.25 t) • Year of manufacture: 1991 Fpsdpfx Afjxtfnwepjc • Power supply: 6 bar compressed air • Air consumption: approx. 3–4 m³/min • Chain: steel 5 x 15 mm, DIN 5684-8 standard • Controls: dual-lever (up/down) • Weight: approx. 35 kg Condition: • Used, fully functional. • Complete set including hook, control valve, and chain bag. • Normal signs of use, with no mechanical damage. Applications: Suitable for lifting tools, components, and parts in workshops, assembly lines, industrial plants, and ATEX zones (depending on version). JDN construction ensures reliability and durability – made in Germany, commonly used in the aerospace, petrochemical, and automotive industries.

Condition: excellent (used), I am selling an ABUS 16T hook block. Very good condition. Fsdpfev Upb Usx Afpspc

Condition: good (used), For sale, Fpedpfx Aev Ubt Njfpjc - Raco T606 electric actuator - Actuator length 800mm - Motor 0.75Kw, 230/380V -20mm/s - 15KN

Condition: new, For sale, Electric motor - Bartec Varnost - 44kW Fedpfx Afjv Uckvepspc - 1770 RPM - Shaft diameter 60mm - New.

Condition: new, rotational speed (min.): 1,465 rpm, rotational speed (max.): 1,770 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 41 A, overall weight: 173 kg, For sale, Fodpfev Ub Hvox Afpopc Electric motor Siemens - Siemens - 22kW - 1465-1770 RPM - Shaft diameter 48mm - New.

Condition: excellent (used), I will sell a spreader, a Lukas double-piston column cylinder. Fedpfx Afjv Dx Ntspspc - LZR 12/300 - LZR 12/700 EN - Very good condition. - Price given for the LZR12/300 cylinder- 450€

Condition: excellent (used), I will sell a set of hydraulic rescue tools Lukas. - Hydraulic shears. - Arm spreader. - Hydraulic pump. Fpjdpfx Afjv Dx Ayspsc - Price given for 1 complete set.

Condition: excellent (used), Electric Hydraulic Pump Fodpfxsvzb Hve Afpjpc - Power supply 380V - Capacity 7 liters of oil. - 25 Bar - Very good condition.

Condition: used, Data please see typeplate. Fpodpfx Ajd Ig U Sjfpec

Year of construction: 1988, condition: used, power capacity 0 kW volt 0 V ampere 0 A Fpedpfod Ihacsx Afpjc Data please see typeplate.

Condition: used, Data please see typeplate. Fjdpod Ig U Tefx Afpepc

Condition: used, power capacity 3 kW volt 380 V ampere 6,8 A Fsdpfx Asd Ihadsfpjpc

Condition: used, power capacity 0 kW volt 0 V ampere 0 A Fedpfxjd Ihaij Afpopc new motor with options G45 und K42 Data please see typeplate.

Condition: used, power capacity 0 kW volt 0 V Fsdpfx Ajd Ihalofpepc ampere 0 A Data please see typeplate.