Used roll benders (motor-driven) for 3 - 6mm sheet thickness for sale (158)

Condition: excellent (used), functionality: fully functional, control type: CNC control, actuation type: hydraulic, controller model: Siemens, number of rollers: 3, roller (top) diameter: 205 mm, side roll diameter: 205 mm, sheet thickness (max.): 6 mm, overall weight: 6,800 kg, total length: 5,500 mm, total width: 2,200 mm, total height: 2,200 mm, Equipment: emergency stop, hardened rollers, Hardned and Grounded rolls Fully Hydraulic machine Hydraulic drop end Central lubrication NEW Opperator panel with SIEMENS Display NEW JOYSTICK Rotation and Positioning rolls CE-Safety line Rolling width: 4500mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 205mm Side roll Ø: 205mm Codpfo Ah Rzusx Aizjri Rolling speed: 0 - 5 Adjustiment lower roll: 0 - 100mm/min. Adjustment side rolls: 0 - 100mm/min. Power: 11kW Length: 5500mm Width: 2200mm Height: 2200mm Weight: 6800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2001, Technical data: Working width: 4700 mm Max. bending capacity: 3.0 mm Max. bending angle: 3.0 mm CNC control Diameter of upper roller: 255 mm Diameter of side lower rollers: 255 mm Diameter of central lower roller: 255 mm Conical bending mechanism through angled positioning of the two side rollers Hydraulic tilting bearings Mobile control panel with display CE marking Dimensions (length x width x height): approx. 7200 x 2000 x 1800 mm Weight: approx. 9 tons Accessories: Codpfx Aie Ah Hucozori Side sheet support device Condition: Very good condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, sheet width 3000 mm plate thickness 6 mm pre-bending 4 Crjdpfxe Ahkine Aizei roll diameter 205 mm total power requirement 5 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 4,0 x 1,4 x 1, 5 m Roundo 3-roll plate bending machine, featuring: - Hydraulic drop-end bearing and remote control - Conical bending attachment: a device for rolling cones and funnels.

Condition: good (used), functionality: fully functional, Year of construction: 2010, control type: manual, actuation type: hydraulic, number of rollers: 3, sheet thickness (max.): 5 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 1,100 kg, Equipment: centralized greasing system, cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, Bending length: 1.050 mm Bendingcapacity: 5.0 mm Steel 3.0 mm Stainless steel 6.0 mm Aluminium Upper roll: Ø130 -> 75 mm Lower rolls: Ø130 mm Cjdpfxsz Tdg De Aizori Featured with: - Hydraulic drop end - 3-rolls driven - Hand-footcontrolled

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 121282, BENDMAK PRO 120 – Hydraulic three-roll profile and tube bending machine | 2024 | only 15.5 hours of use We offer a nearly new hydraulic three-roll profile and tube bending machine, BENDMAK PRO 120, manufactured in 2024. The machine has been used only minimally. The control system currently shows only 15 hours and 27 minutes of machine operating time and 31 hours and 14 minutes of hydraulic operating time. Operating times can be verified directly on the machine's display – see photos. The machine is fully functional, in very good technical condition, and ready for immediate use. The sale includes an extensive set of interchangeable rolls/tools for bending various profiles and tubes, as shown in the photos. Technical data: Crsdpfjzzkvpsx Aizji Manufacturer: BENDMAK Model: PRO 120 Year of manufacture: 2024 Serial number: 121282 Machine operating hours: 15:27 h Hydraulic operating hours: 31:14 h Type: hydraulic three-roll profile bending machine Shaft diameter: 120 mm Working roll diameter: 390 mm Motor power: 11 kW Power supply: 400 V / 50 Hz Weight: 4,720 kg CE Equipment and accessories: hydraulically controlled lower rolls hydraulic side guide rolls drive for all three rolls separate mobile control panel touchscreen display multiple sets of interchangeable rolls/tools for various profiles and tubes accessories shown in the photos are included in the sale The machine can be inspected and demonstrated in operation on-site.

Condition: used, functionality: fully functional, Year of construction: 1984, Max. bending length: 3150 mm; Max. sheet thickness: 16 mm; Min. inner diameter of rolled tube: 550 mm; Rolling speed: 7 mm/min; Roll adjustment speed: 2x22 mm/min; Machine dimensions (L x W x H): 7900x1930x2500 mm; Machine weight: 46,800 kg. Codjxxvlkopfx Aizsri

Condition: used, Year of construction: 2015, Working length: 1270 mm Cedpfxsz Erabo Aizori Roller diameter: 120 mm Maximum sheet thickness: 4.5 mm Sheet thickness for bending: 4 mm Electrical connection: 400 V, 2.2 kW Weight: 1250 kg Space requirement: 2300 x 800 x 1100 mm with hardened rollers

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm Crsdpfx Asw Hpzweizei pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 150 mm, roller (top) diameter: 170 mm, side roll diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 1,500 kg, total length: 2,500 mm, total width: 800 mm, total height: 1,100 mm, power: 5 kW (6.80 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, PLATE ROLL 2000x6 mm SERGI 3ROLL INITIAL PINCH ASYMMETRIC 2050 X6 MM Rolls length 2050 mm -Top roll 170 mm -lower/Side rolls 150 mm -Power electric 5,5 Hp Capacity -plate width 2000 mm -plate thickness 6 mm with prepinch Configuration on the machine -Rollers surface hardened high strength -Central rolls driven electric rotation on gearunit -side roll electric run with prepinch Pinch roll position with handwheel Crjdpfx Aijx Ewa Eozsi Front open manual drop-end -Readout gauge of side bending roll -Foot-pedal electric rollers rotation back/forth -Joystick electric control of side roll -Safety installations with emergency stop.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Max. bending diameter: Ø 76 mm Max. pipe wall thickness: 3.0 mm Max. bending length: 6000 mm Min. bending angle: 0.1° Max. bending angle: 190° Codpfx Asyr N Ereizsri Max. bending radius: 260 mm Operating speed Rotation speed: 200°/second Bending speed: 30°/second Feed speed: max. 1000 mm/second Tolerances: Rotation (°): ±0.1° Bending (°): ±0.1° Feed (°): ±0.1° Hydraulic system: Hydraulic motor power: 7.5 kW Max. hydraulic pressure: 180 bar Hydraulic oil: 120 liters Rated power: 44 kW Voltage: 400 V AC Dimensions L x W x H: 8900 x 1200 x 1850 mm Weight: 4850 kg Description: Materials: Steel | Stainless steel | Aluminum | Brass | Copper and other flexible materials for simple to complex shapes Display: Portable 15-inch color touchscreen monitor Control panel: Servo and hydraulic motion control, plus selectable servo axis speed Foot pedal User-friendly AKYAPAK control software Hydraulic system: Bosch, Parker Operating modes: Manual, semi-automatic, and fully automatic Programming: Y-B-C or X-Y-Z mode Cooling system: Hydraulic oil cooler Pipe clamp: Hydraulic Industrial PC: Pentium processor, 256 MB RAM, hard drive, and floppy disk drive Lubrication system: Automatic Control: PLC-based Rotary axis: Servo-controlled Bending system: Hydraulic Auxiliary axes: Hydraulic Forward and reverse movement: Manual Pipe length calculation: Automatic, according to program Workpiece display: 3D 360° graphic display

Condition: used, plate width 1020 mm plate thickness 4 mm diameter of upper rolls 110 mm total power requirement 2,2 kW weight of the machine ca. 900 Kg Csdoz N Hwqjpfx Aizsri dimensions of the machine ca. 2,1 x 0,7 x 1,2 m Fasti three-roll plate bending machine / plate rolling machine In excellent condition. The machine was completely overhauled in 2016.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 57000 € 1077.3 € 2550 mm 13 mm 13 mm 10 mm 10 mm Cjdpfx Asyb Sy Rjizeri 8 mm 260 mm 260 mm 200 mm 1,5 / 6 m/min 7.5 kW 4800 mm 1600 mm 1550 mm 6800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 29000 € 553.9 € 2050 mm 4 mm 4 mm 3 mm 3 mm 2 mm 130 mm 130 mm 130 mm 5 m/min 2,2 + 1,1 kW 3800 mm 1150 mm 1110 mm 2450 kg motorized roller drive Crsdpsyb Sy Dsfx Aizsi upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed

Condition: used, roller (top) diameter: 140 mm, roller length: 2,030 mm, sheet thickness steel (max.): 4 mm, Akyapak 3 roller mill Type 2030 x 140 Roll length 2,030 mm Max. plate thickness 3.5 mm Codpfx Aiowmdw Hezsri Dia. top roller 140 mm ø Machine dimensions (lxwxh) 3,000 x 750 x 1,100 mm Wire grooves 8/12/15mm Price excluding VAT

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 24500 € 470.4 € 1550 mm 4.5 mm 4.5 mm 3.5 mm 4.5 mm 3.5 mm 3.5 mm 2.5 mm 130 mm 130 mm 130 mm 5 m/min 2,2 + 1,1 kW Crjdpfxeynmwds Aizoi 3300 mm 1150 mm 1110 mm 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5100 € 98.43 € 1050 mm 2 mm 75 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll Cjdpfx Aiey Dvlkjzjri tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls

Condition: good (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Manufacturer: Carl Kneusel, 3-roll bending machine, hand-operated -Max. sheet width: 1020 mm -Max. sheet thickness: mm -Roller diameter: 55 mm Crodpfx Aiez A S Srjzji -Dimensions: 1670/580/H1150 mm -Weight: 156 kg

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers Crsdexacfgopfx Aizei - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 38000 € 725.8 € 2050 mm 8 mm 8 mm 6 mm 8 mm 6 mm 6 mm 4 mm 180 mm 180 mm 150 mm 5 m/min 3850 mm 1350 mm 1290 mm 3300 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): Credeyb S Afepfx Aizsi overhead crane side supports NC control variable speed

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 43000 € 821.3 € 2050 mm 10 mm 10 mm 8 mm 10 mm 8 mm 8 mm 6 mm 200 mm 200 mm 180 mm 6 m/min 3850 mm 1350 mm 1290 mm Credsyb S Arepfx Aizei 3750 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll Credpfexn Rrqex Aizei - Foot pedal operation - Brake motor - Emergency stop - Documentation - 400V

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 3ROLL 4000 X 6 MM, roller (bottom) diameter: 300 mm, roller diameter: 310 mm, roller length: 4,050 mm, working width: 4,000 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 11,000 kg, total length: 5,700 mm, total width: 1,500 mm, total height: 1,700 mm, type of input current: three-phase, working length: 4,000 mm, Equipment: documentation/manual, emergency stop, 3 ROLL PLATE BENDING MACHINE WITH PREPINCHING capacity plate roll 4000 x 6 mm Plate width 4000 mm Thickness plate rolling 6 mm Pyramid 3 rolls with pre-pinch cylindrical plate rolling Conical plate rolling Rollers surface length 4050 mm Top roll 310 mm Crsdpevn I Hcefx Aizji Side rolls 300 mm Datasheet power rollers rotation 15 Hp -3 rolls driven rotation with gear unit power bending- prebend side lower rollers 7,5+7,5 Hp Cene bending attachment rollers tiltable for plate conical forming - hardened contrast pad roller type Hydraulic open front drop-end , top-roll tilt-up wide opening for unloading Console electric on wheels, electric push buttons commands remote Digital readouts rollers position repetability safety and emergency installiton machine in working condition dimension 5700 x1500 x H1700 mm weight 11 Ton

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 16600 € 318.72 € 2050 mm 4 mm 140 mm 2.2 kW 3200 mm 750 mm 1000 mm 1650 kg 3 reels asymmetrical roller arrangement - with pre-bending 2 driven rollers by means of a brake motor manual Back Roll Cedpfx Aioynmv Tjzeri upper roller can be swiveled forward forward / reverse run conical rounding by inclining the rear rollers movable control panel OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out (sample photo)

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 21800 € 418.56 € 1270 mm 5 mm 5 mm 4 mm 5 mm 4 mm 4 mm 3 mm 130 mm 130 mm 130 mm 5 m/min 2,2 + 1,1 kW 3020 mm 1150 mm 1110 mm 2150 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports Csdsyb Sz Uepfx Aizeri NC control variable speed

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, side roll diameter: 90 mm, sheet thickness steel (max.): 3 mm, Equipment: swiveling upper roller, - Capacity 1050 x 3 mm - Roller diameter 90 mm - Conical bending - Swing-out upper roller - Brake motor - Foot control - Emergency stop - Documentation Cjdpfx Asq H D S Rsizsri - 400 V