Used single shaft shredders for sale (166)

Condition: like new (used), functionality: fully functional, Vecoplan chipper for lumber shavings 45/16/ 2V - made in Germany - perfect chips directly into the kiln - vibrating system TECHNICAL PARAMETERS: Gsdpfet Hr Drox Ah Dsuk - width 450 mm - height 160 mm - number of knives 2 pieces - engine power 50 kW - rotor diameter 500 mm - rotor length 475 mm - sieve 40 x 40 mm - top pulling gear shaft 4 kW - bottom pulling gear shaft 2.2 kW - reverse - vibrating feeder 10500 mm x 450 mm - motor power 2.2 kW - cross vibrator machine 4500 mm x 2200 mm - motor power 1.5 kW - height 2450 mm Transport dimensions: 1050 cm x 245 cm x 245 cm weight ~ 4 t

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,800 kg, rotor diameter: 368 mm, number of blades: 82, rotor length: 1,500 mm, power: 45 kW (61.18 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 22 mm, input voltage: 415 V, extraction nozzle diameter: 250 mm, Just had the main shaft rebalanced, main bearings and housings replaced, gearbox end needed some work doing, gearbox checked and oil changed, all drive belts good, all in had just over £7k spent. Previously had the shredding screen replaced using Hardox with smaller holes cut for finer shred, has front mounted conveyor feeding through a magnetic separator as pictured, dust extractor and of course main control panel. All was working as it should be and then it was turned off, about 4 months ago, so needs to go back to work for someone. Looking for offers over £8K Gsdoxp Nm Nspfx Ah Dsuk Shredder located in Carlisle.

Year of construction: 2006, condition: used, Single shaft shredder Weima WLK10 main motor 55kw Gujdpfx Ahsi Ew Tbs Dek rotor lenght 100cm the machine is 100% efficient

Condition: used, machine/vehicle number: 13289, Rotor diameter: 450 mm Rotor width: 1500 mm Rotor knives: 136 Stator knives: 2 x 5 pcs Infeed opening approx. 1500 x 1500 mm Drive motor: 60 kW Gjdow Rg Smjpfx Ah Douk The machine currently does not match the picture, as it is being overhauled.

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 24,000 kg, rotor diameter: 620 mm, number of blades: 30, total length: 6,300 mm, total height: 2,430 mm, total width: 4,700 mm, rotor width: 2,491 mm, power: 200 kW (271.92 HP), type of input current: three-phase, rotational speed (min.): 150 rpm, filling opening width: 2,495 mm, filling opening length: 3,190 mm, input voltage: 380 V, Vecoplan VAZ 300/250 UNF Gujdsxlm Trjpfx Ah Dsk This machine is still in operation and will be available on October 20th. For more information, please contact us.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, overall weight: 2,000 kg, rotor length: 870 mm, power: 30 kW (40.79 HP), We are offering you a test machine for various waste materials. The machine us good condition Guedowy Ninjpfx Ah Djk

Condition: like new (used), Year of construction: 2021, power: 264 kW (358.94 HP), Electric engine: 264 kW Equipped with: Discharge conveyor, overband magnet, radio remote control. Godpewnq Diefx Ah Dsuk

Condition: good (used), Year of construction: 2010, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1234, overall weight: 24,000 kg, total length: 6,445 mm, total width: 2,925 mm, Technical specifications: • Drive: 2 × 160 kW (ABB) • Dimensions: approx. 6,445 × 2,925 × 3,111 mm • Weight: approx. 24,000 kg • Infeed opening: 2,825 × 2,030 mm • Rotor: length approx. 2,805 mm, speed approx. 355 rpm, 80 knives • Screens: 20 - 60 mm, manual replacement Design advantages: • Single-stage, efficient belt drive • Convenient hydraulic pusher for continuous operation • Quick service access to rotor and cutting chamber • Safety system protecting the drive • Adjustable granulation thanks to easy screen change • Fourfold usable knives – spare parts savings Location: Trzebinia (Poland) – inspection possible. Guodpfx Ajw R U Upsh Djk

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT4080 Main motor power: 37 kW Hydraulic system motor power: 2.2 kW Working rotor length: 800 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 46 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Guedpfxsq Sp D Ro Ah Djk Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, ZERMA single shaft shredders of the ZPS series have universal application possibilities. They are suitable for shredding heavy and massive parts that cannot be directly shredded on a granulator. The large and heavy rotor of the shredder series ZPS , the low rotor speed as well as the high torque ensure low current peaks and thus avoid high energy costs. Single-shaft shredders from the ZPS series are designed for a wide range of applications. Depending on the task, the shredded material can be used directly in the manufacturing process, or it can be subsequently ground in a granulator. The shredders from the ZPS series are equipped with a 2-step hydraulic system that prevents the rotor from blocking. Knives and knife holders are completely screwed into the rotor. Generously dimensioned, externally located rotor bearings and a hydraulically swivelling screen basket are part of the standard equipment of every shredder. The machines can be extended or upgraded with numerous options, such as rotor cooling or Hardox wear armouring. Compared to the ZSS shredders, the machines of the ZPS series have a higher contact pressure device, which optimises the acceptance behaviour between the pusher and the rotor, especially with large-volume parts or pipes. Gjdpeghgdnsfx Ah Dsuk

Condition: ready for operation (used), Shredder with diesel engine, e.g. for engines, gearboxes, metal, electric parts. The machine is fully operational. We can send a video. Gsdpfx Aew Ngn Eeh Dsuk

Condition: good (used), Year of construction: 2007, Single shaft shredder Weima WLK10 main motor 55kw rotor length 100cm the machine is 100% efficient Godpjtpcn Ujfx Ah Deuk

Condition: new, ZXS 1500 – 2x75kW – Working cross-section: 1500 x 1490mm ZXS 2000 – 2x90kW – Working cross-section: 1500 x 1900mm ZXS 3000 – 2x110kW – Working cross-section: 1500 x 2700mm ZXS series: The single-shaft shredder for demanding shredding tasks. The machines are extremely robust and achieve high throughput rates. Working widths from 1500 to 3000 mm and rotor diameters of 750 mm are available as standard. Wide range of applications for the ZXS series: Many other materials can be shredded with the ZXS series and prepared for recycling, such as: B. Old cables, PET bottles, paper and cardboard, etc. Get advice on how your material can be shredded and recycled. Gusdpfsghgdysx Ah Dsk

Condition: good (used), Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA Guedpfotqdxfox Ah Djk MODEL WLK15 MAIN MOTOR 90KW

Condition: new, General: The single shaft shredders of the ZTS-/ZTTS-series have been specially developed for the shredding of whole or pre-shredded tyres. Both the ZTS and ZTTS shredders have a large rotor diameter of 760 mm and working widths of 1500 to 3000 mm. Both types are equipped with oversized external bearings and double drives. The tangential infeed ensures optimum feeding of the input material without the need for an additional hydraulic pusher. All tyre shredders have special wear protection in all relevant machine areas. ZTS and ZTTS differ in the number of rows of stator knives and in the screen perforation installed. Gujdpfx Aheghgd Ds Dsk Applications: Machines of the ZTS series have one stator knife row and are therefore used for the first stage in the pre-shredding of car tyres or other large, solid parts to a final fineness of approx. 150 mm. For the second stage a ZTTS shredder is used, which grinds the material to approx. 20 mm. The well thought-out machine design together with the adjustable blade gap allow an optimal separation of rubber and steel fractions. In a further stage, the steel fractions can be separated via a strong magnetic separator.

Condition: new, The Zerma ZCS Shredder integrates leading shredder and granulator technology into a single compact unit. With the development of the shredder and granulator combination, ZERMA has successfully continued the expansion of its product portfolio. By combining the proven design and high torque of the single shaft shredder with an extremely effective granulator, ZERMA can deliver a reliable and compact pre-shredding system. The shredder and the granulator are driven individually, which contributes to better control of the whole process. To increase the efficiency, ZERMA Smart Drive System is used to constantly control the load and adjust the amperage accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where predictable quality in size reduction and granulation is required. Typical applications include, but are not limited to, the following: Injection Molding Thermoforming Blow molding Recycling Extrusion Godpfx Asghgd Soh Dsuk Waste

Condition: new, GENERAL Typical of the single-shaft shredders in the ZIS series are their voluminous grinding chambers, the stability of which is ensured by their welded steel construction. The rotor diameter is also generously dimensioned at 457 mm. The rotor widths are 1200, 1500 and 2000 mm. The ZIS series retains all the advantages of the ZSS series: drive via an oversized gearbox, reversible blades, screwed blade holders, robust, external bearings, hydraulic screen basket, easy handling and technically sophisticated control systems. APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies: IBCs, garbage cans, pallets, rain barrels, etc. The machine can also be used universally for countless applications in the plastics and wood industries. Like all Zerma shredders, the machines in the ZIS series can also be equipped with various wear options. ADVANTAGES 35% larger grinding chamber volume compared to the ZSS series Gujdeghgdvopfx Ah Djk Internal hydraulic slide Increased slide speed in the return movement Compact dimensions Knife holders screwed into rotor pockets

Condition: used, machine/vehicle number: 13163, Rotor diameter: 368 mm Rotor width: 1000 mm Rotor blade: 52 Godjwhgpnjpfx Ah Dsuk Stator knife: 1 Inlet cross-section approx. 1000 x 1200 mm Drive motor: 37 kW

Condition: new, Dimensions with base frame: approx. 1500 mm x 1400 mm Feed speed: 27 m/min Rotor blades: 2 Stator blades: 1 Godowbwyqepfx Ah Dsuk Infeed cross-section: approx. 10 x 40 mm Drive motor: 1.5 kW Weight with base frame = approx. 270 kg

Condition: new, With the cost-effective single-shaft shredders of the ZWS series, a wide range of shredding tasks can be realized, e.g. as a preliminary stage for subsequent briquetting, for the production of wood chips for firing or return to the particleboard industry. Depending on throughput and material, the machines can still be individually adapted to the task. Typical feed materials for shredding are: Large panel and board sections Wooden pallets Waste from carpentry workshops Packaging wood Construction and demolition wood Veneers, MDF and chipboard Gujdpfsghgdgjx Ah Dok

Condition: used, machine/vehicle number: 13292, Rotor diameter: 368 mm Rotor width: 1500 mm Rotor blades: 82 Stator blades: 1 row Guedpfowmg Sgex Ah Dok Drive motor: 90 kW

Condition: used, machine/vehicle number: 13187, Rotor diameter: 400 mm Rotor width: 1100 mm Rotor blades: 54 Stator blade rows: 1 Godewbwvlopfx Ah Deuk Inlet cross-section approx. 1100 x 1500 mm Drive motor: 37 kW

Condition: new, machine/vehicle number: ZWS 600 SMART, The ZWS 600 SMART serves as a supplement to the ZWS series. The series was designed as a cost-effective solution specifically for shredding wood residues in small and medium-sized wood processing companies. AT A GLANCE: Compact design Stable welded steel construction Large-volume hopper for material feeding Rotor made of solid steel with screwed knife holders PLC control for fully automatic operation Technical data SMART 600: Inlet 600 x 840 mm Motor 11 / 15 kW Rotor diameter 250 mm Rotor speed 80 - 120 13 rotor knives Technical data SMART 600 S: Inlet 600 x 840 mm Motor 18.5 / 22 / 30 kW Rotor diameter 250 mm Rotor speed 80 - 120 Gujdpfjghgdcjx Ah Dsk 26 rotor knives

Condition: new, ZHS 600 - 18.5/22 kW Rotor diameter: 400 mm Working cross-section: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Working cross-section: 800 x 820 mm ZHS 1100 - 37 kW Rotor diameter: 400 mm Working cross-section: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working cross-section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Working cross-section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Working cross-section: 1,640 x 1,550 mm ZHS 2000 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross-section: 1,920 x 1,550 mm ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross-section: 2,480 x 1,550 mm   ZHS - economical all-rounders The ZHS series has a load-dependent hydraulic slide that feeds the material to the rotor in a slightly inclined position in a horizontal movement. The material is cut between the rotor and stator blades until it falls through the sieve installed and screwed under the rotor. The replaceable sieve defines the final grain size. The shredded material can be discharged via a conveyor belt, a discharge screw or pneumatically using a suction system. The single-shaft shredders of the ZHS series are designed for light to medium-heavy loads in the plastics industry.   Technical details: Roller-bearing hydraulic slide with horizontal movement Screwed knives and knife holders Optionally with segment base for particularly thin parts and materials Aggressiveness of the rotor can be reduced or increased by screwing on filler pieces Can be combined in a 2-stage system with a cutting mill as a pre-shredder Gusdpfxjghgdks Ah Djk

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specially developed for shredding pipes with diameters of up to 1,300 mm and made of different materials such as PE, PP, PVC. These machines can directly shred plastic pipes up to a length of 9 meters without prior cutting or sawing. At the heart of the machines are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low speed. Gjdpjghgd Iefx Ah Dsuk The pipe is fed into a closed feed trough in which the pipe is pressed against the rotor by means of a hydraulic ram. The pre-shredded material is then fed from the shredder to a granulator via a conveyor belt. The granulator grinds the material into a directly processable regrind. The entire plant is operated automatically via a central control unit. Another advantage of the plant is the low energy requirement, the avoidance of power peaks, and the minimization of accident risks during pre-shredding.