Condition: good (used), Paint unit, paint pump GRACO MERKUR + Graco G40 gun. Bwodpfx Asulc S Refyjk

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 2000/80205, Complete powder coating line with automatic powder recovery. 1. WAGNER automatic spray booth – year of manufacture: 2000 Serial no.: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with ZEUS Tribo spray guns – 8 units with rotation Bjdpjyrr Rqjfx Afyswk Type of operation: pass-through Entry size for coated parts: 100 x 158 cm 2. IMEL washer – external dimensions: 3 x 12 x 4.2 m (L-shaped) - Washer entry size: 72 x 144 cm - Water tank: 3 x 2.2 x 1.2 m - Capacity: approx. 6,000 liters (located under the washer) - Heating by Sant Andrea burner, model KB 40 GM with modulating capacity from 179 to 468 kW (gas burner) 3. WAGNER powder filtration system, dimensions: 1.5 x 3.2 x 5.5 m 4. Overhead conveyor – length approx. 100 m, self-propelled 5. WAGNER powder recovery unit with cyclone 6. Oven (with 2 circuits) with gas burner 163 – 390 kW - One circuit for drying parts after washing - Second (longer) circuit for curing powder after application - Oven dimensions: 12 x 7 x 5.3 m; maximum coated part size: 60 x 120 cm Additionally, we have 2 oil burners of similar capacity as alternatives to the gas burners. Approximate installation footprint: 30 x 11 m.

Condition: used, Year of construction: 2010, machine/vehicle number: 0901-260005, Kaltenbach Gietart Sprint 1504 continuous blast system with 4 blast turbines. Technical data Kaltenbach Gietart Sprint 1504 Number of turbines: 4 pcs. type C 380 Turbine output: 11 kW Brush and blow-off unit: 1 piece Sheet thickness min: 6 mm Flat material min: 60 x 80 mm Working speed: 0.8 - 1.5 m/min. Throughput speed: 0.6 - 10 m/min Bwodpfxjymy His Afyjk Feed-through opening: 1600 x 650 mm (for sheets up to max. 1510 mm wide) Roller conveyor height 640 mm Power supply: 400 V +/- 5 %, 50 Hz, Control voltage: 24 V DC Total connected load: 84 kW Compressed air supply: 7 bar, dry, oil-free, clean, 20 m³/h The blasting system is suitable for blasting: Profiles: max. 1000 x 300 mm Sheet metal: max. 1510 width Flat bars: min. 60 x 8 mm Transport length: min. 2000 mm Transport weight: max. 1000 kg/m - min. 30 kg/piece Material quality: S 235JR*NEN-EN 10025-2 Structure of the Gietart blasting machine: Machine housing, 10 mm thick Manganese lining, 4 mm thick Manganese wear strips, 8 mm thick Inlet sluice 1400 mm, with rubber curtains Outlet sluice 800 mm, with rubber curtains Collecting hopper with screw conveyor Screw conveyor to the bucket elevator

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled Bwodpfoqfcvisx Afyjk - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, Year of construction: 2011, Powder coating line AABO Andersen Bodpfx Aeyrnh Esfyswk

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Bodewqg Iiopfx Afyswk Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Ratio: 45:1 Maximum fluid output pressure: 310 bar Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Bwsdpoyx Irlsfx Afysk Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Fluid inlet: ¼” Weight: 411 g Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼"

Condition: new, functionality: fully functional, warranty duration: 12 months, total width: 2,200 mm, total length: 1,050 mm, total height: 2,300 mm, type of input current: three-phase, Felgen Cleaner is a tank designed for removing paint coatings. It is used in wheel refurbishment, especially for wheels with complex designs. Wheel etching, i.e. cleaning residues using a chemical bath, is a process that removes all paint layers from the wheel surface. This machine holds approximately 800 liters of liquid and is equipped with a temperature and bath time control system. Additionally, an oil jacket is used to ensure an even temperature distribution inside the tank. This solution allows chemicals from almost any manufacturer to be used, even at eighty degrees Celsius. It features a winch: an integrated lifting and lowering mechanism for the load basket, allowing wheels to be placed inside without the need for external devices—making it a fully autonomous workshop solution. Felgen Cleaner is equipped with: - control panel - agitator - heating elements - drain valve - lid Bodoxm Twyepfx Afyswk - tank - winch Technical specifications: Power supply: 400/230V 50Hz Overall dimensions (W x D x H): 2200/1050/2300 mm Tank dimensions (W x D x H): 1490/750/750 mm Basket dimensions (W x D x H): 1275/615/155 mm Basket load capacity: 150 kg Programmable cycle time: 0-99 min Tank capacity: 800 L Washing temperature: 90 °C Heater power: 3 x 4 kW

Year of construction: 2006, condition: excellent (used), Manufacturer: FORNAX AS Drying oven, curring oven chanel, chamber with fans. Working Temperature: 130 ° C. Year of manufacture: 2006 Size: Length: 6,2 m Width: 2,5 m 2 chamber, Open size: 90 x 190 cm Heating capacity: 110 kW Bwsdpsfkvr Hefx Afyok 72 Heating elements

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 Bwodoyxy D Topfx Afyjk - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: good (used), Year of construction: 2013, Low carbon steel shot LC S-110, size: 0.3 mm Min. workpiece size: 50x80 mm Max. workpiece size: 600x400 mm Number of spray nozzles: 4 pcs Spray wheel diameter: 380 mm Grain flow rate: 60-120 kg/min/nozzle Spray material loading: 1500 kg Spray material to be used max. HRC 51 Grain size 0.2–1.4 mm, max. carbon content 0.7% Bwjdpsyhbkfjfx Afysk

Condition: good (used), Year of construction: 2016, total height: 2,640 mm, total length: 3,300 mm, total width: 3,960 mm, volume flow: 8 m³/h, Equipment: cabin, Technical Details: 75 m³ area including paint booth, drying booth, and paint storage room. Paint booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: air intake from the air-conditioned area - Air supply: 8,000 m³/h Drying booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: electric heating cartridges, 22 kW, 3x400V - Air supply: 2,500 m³/h Paint storage room: Bwedpsyhbggsfx Afysk - Internal dimensions: 3100 x 2000 x 2600 mm - Heating method: air intake from the air-conditioned area - Floor area: 6.2 m²

Year of construction: 2012, condition: like new (used), functionality: fully functional, Rösler RSKI 1400-SAT – Satellite Indexing Blast Cabinet, Automatic, 2 Nozzles For sale is a near-mint Rösler injector blast cabinet, model RSKI 1400-SAT. This system is designed for the automatic blasting of small and medium batch series, making it ideal for components up to approximately 280 mm in diameter. Parts are evenly blasted via a rotating satellite table—ideal for cleaning, deburring, descaling, derusting, or roughening precision components. Once raw parts are loaded, the blasting time per satellite can be set at the control panel. After confirming raw part loading using the button directly next to the cabin door, the individual satellites index into position and are processed. Upon completion of the blasting cycle and after all parts have been treated, a finished message is displayed and the system can be reloaded and unloaded as needed. Thanks to the generously dimensioned integrated filtration technology, the blasting machine is suitable for virtually all types of blasting media, including finer mineral abrasives without issue. Originally used in medical technology, the interior of the system is lined with rubber. This presents no disadvantages for other industries or users; indeed, it provides additional wear protection for both media and machine and dampens noise. This means the unit operates both more efficiently and more quietly than an unlined cabin. By removing the front manual access cover, manual blasting can also be performed at any time with minimal setup effort. Additional nozzles can be retrofitted if required. Key technical data (excerpt): - Manufacturer: Rösler Oberflächentechnik GmbH - Model: RSKI 1400-SAT Satellite Blast Cabinet - Year of manufacture: 2012 - Blast system: Injector blasting with 2 boron carbide nozzles SPI 38 - Satellite rotary table with six workpiece holders - Power connection: 400 V, 3Ph/N/PE, 50 Hz - Connected load: 4.0 kW - Main drive: 0.75 kW Bwedpfxeyudhao Afysk - Control voltage: 24 V DC - Separate control cabinet, operation via buttons/switches and foot pedal Your advantages at a glance: - Automatic satellite blast cabinet for series and precision components - Originally equipped for use in medical technology - Uniform all-round processing of parts without direct component contact - Two blast nozzles for excellent surface coverage and reduced processing times, with optional expansion - Large front door and viewing window for convenient loading and optimal process monitoring - Compact, rugged construction—easily integrated into existing production environments

Condition: new, Year of construction: 2025, FILTER WITH A MEMBRANE PUMP !!! A bathtub for removing the varnish coat from rims and other objects covered with various types of paints, solvent varnishes and powder varnishes. Basket working dimensions (mm): 1250 x 800 x 700 mm * The bathtub is made of high-grade 304 acid-resistant steel. * Insulated on all sides with 40 mm insulation material, it allows us to efficiently and quickly heat the liquid to the desired temperature. * The shell of the device is made of stainless steel. Equipment of the device: - Indirect heating (heating mantle), - Automatic temperature control of the heating medium, - Baskets made entirely of stainless steel, - LED indicator lights, - Ceramic heaters in the cover of 2 x 4,5 kW acid-resistant pipes, - Aeration system for the entire bottom of the bathtub, - 12-month warranty. Our devices are made with great care and attention to detail. Bwedjgwg Haspfx Afyjk CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: good (used), Year of construction: 2023, This paint booth is being sold on behalf of a customer and can be inspected under power. Bwjdpfxsylm U Ro Afyok

Condition: excellent (used), functionality: fully functional, Klöckner Ionon GmbH is a company specializing in plasma nitriding and coating technologies. The model designation S800/7000 refers to a specific plasma nitriding system (vacuum furnace) used for the surface hardening of steel components. Plasmanitriding Technology Dr. Böhm GmbH +2. Here are the typical technical features and applications for systems of this size: Technical Features (S-Series): Process: Plasma nitriding, plasma nitrocarburizing (to increase wear and corrosion resistance). System Type: Vertical or horizontal reactor (vacuum furnace). Dimensions (S800): The designation "800" generally refers to the usable chamber diameter (approx. 800 mm), while "7000" may refer to the system series or a specific height/volume. Functions: Precise control of the compound layer, suitable as pretreatment for PVD coatings. Bedpfoytl Hhsx Afyewk

Condition: used, degree 250 °c width . mm depth . mm No.8505548 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Bwedpfx Afoyutupoysk About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2014, condition: like new (used), FOUR-BELT TWO-LINE FURNACE Bedpfx Ajymdzqefyswk - Brand: IKEO (Italy), year 2014 o Inlet dimensions: 80*35 o Conveyor speed: 0.1 to 3 m/min o Heating chamber dimensions: 80*35*1140 o Cooling chamber dimensions: 80*35*1525 o Temperature: 1100°C o Conveyor belt made of thin stainless steel sheet o Atmosphere: Nitrogen + H2 or Argon o Power: 25 kW This furnace will only be available in June. Viewings possible in Switzerland.

Condition: ready for operation (used), Hornich ISK 800 SF Sandblasting Cabinet Injector Blast Cabinet Fine Blasting Unit Work Surface: W=740 mm D=480 mm H=360 mm Required Space: W=800 mm D=770 mm H=1480 mm Electrical Power Consumption: 220 V/50Hz, 400 watts Air Consumption: approx. 400 l/min depending on the air nozzle You are welcome to arrange a viewing. We can organize low-cost shipping for you! You will receive a proper invoice. Bwsdpjyr Dlajfx Afyek For foreign customers, a net invoice can also be provided, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers as well. The stated company names and trademarks are the property of their respective owners and are used only for identification and product description purposes. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: new, Year of construction: 2026, warranty duration: 12 months, total width: 2,100 mm, total length: 1,500 mm, total height: 2,400 mm, 🇬🇧 WHEEL PAINT STRIPPING TANK — TOP SALES | ULTRA PREMIUM BUMEX Sp. z o.o. — Industrial Chemical Stripping Technology Professional industrial stripping tank designed for intensive chemical removal of powder coatings, industrial paints and solvent-based coatings from aluminium and steel wheels as well as various metal components. Engineered for maximum process efficiency, operational safety and long-term continuous industrial use. Technical Data Working basket dimensions: 1200 × 1200 × 700 mm (simultaneous processing of up to 8 wheels). Chemical capacity: approx. 1200 litres. Construction materials: process tank — acid-resistant stainless steel AISI 304, external housing — stainless steel. Thermal insulation: fully insulated tank — 50 mm (high temperature stability and reduced energy loss). Standard Equipment ✅ indirect heating system via oil heating jacket for uniform temperature distribution, ✅ automatic heating medium temperature control, ✅ ceramic heating elements in acid-resistant protection tubes — 4 × 3.5 kW (14 kW), ✅ mixing system supporting uniform chemical circulation throughout the tank, ✅ fully stainless steel process basket, ✅ heavy-duty loading frame for safe lifting and lowering of the load, ✅ industrial control panel with LED status indicators and safety protection systems, ✅ fully enclosed stainless steel construction resistant to aggressive chemical environments. Key Advantages ✔ uniform heating of the entire chemical volume — no local overheating, ✔ high process efficiency with optimised energy consumption, ✔ designed for continuous industrial operation, ✔ excellent chemical and thermal resistance, ✔ ergonomic loading of wheels and large components. BUMEX Quality Standard CE conformity, full technical documentation, manufacturer warranty — 12 months, Bedpfxofmf Ize Afyjwk warranty and after-sales service, professional technical consulting. Commercial Terms ✔ short delivery times, ✔ customised configurations and dimensions available, ✔ own transport — individually priced, ✔ VAT invoice provided. BUMEX Sp. z o.o. — Industrial solutions engineered for reliability, safety and long-term performance.

Condition: used, Technical details: machine weight approx.: auf Anfrage kg dimension machine xH: auf Anfrage m Surface measuring and recording device SP6 2x feeding device PRK 6720702 1x measuring stand PST-Ue ( transverse = 165mm and vertical adjustment = 440mm) table size 650 x 450mm 1x measuring stand PST-Ve (vertical adjustment 450mm, motorized) + manual control unit; table size 650 x 178mm Perthometer S6P Bjdpfou N Awvsx Afyewk Without base cabinet, without the granite plate shown in the picture. Can be offered separately. i.D. *

Year of construction: 2007, condition: like new (used), functionality: fully functional, Tape Machine Manufacturer: Ruscher Model: RU-FE Year: 2007 Information Tape-applying machine with roller conveyors, total length 11 meters. Suitable for facade profiles and many other types of profiles that need to be coated with protective film tape. Dimensions Length: 11,000 mm Width: 800 mm Height: 1,400 mm Bwjdpfexyyc Aox Afysk Seller’s Comments Fully functional Used in a production line for aluminum profiles Can be separated for transport

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Complete powder coating line with automatic pretreatment and manual painting. Max. part size: LWH 3 x 1,5 x 2 m Max. part weight: 500 kg Room size: min. 12 x 24 m (main part, without conveyor in other rooms). Bwjdsylmd Eopfx Afyjk Gas burners 2 pcs. 190 kW, 1 x 190 kW, 1 x 250 kW. Actual total use ca. 300 kW Electric connection: 115 kW installed / ca. 45 kW in regular use Line set-up: Pos. 1. Manual transportation system – with steel construction and 2 lifts, 10 load-bars Pos. 2. Chemical chambers 2 pcs. with spray pre-treatment, automatic movement Pos. 3. Reverse osmosis plant with water softener Pos. 4. Waste water treatment pant Pos. 5. Direct gas heated water drying oven Pos. 6. Powder booth with 2 Nordson XT painting units Pos. 7. In-direct gas heated powder curing oven Pos. 8. PLC control panel Line is in working condition and regularly serviced. Future service and support available in all Europe. Layout can be changed according to needs. It is possible to divide the line into two parts and sell separately. Line will be dismantled in middle of July 2026, earlier delivery is not possible. Line can be visited and inspected in operation. We can offer only the equipment or also "turn-key" moving to your premises and/or provide installation supervisor.

Condition: new, functionality: fully functional, Year of construction: 2026, The dust collector for cabin sandblasters is a complete unit equipped with an engine and a filter. Ensures effective removal of dust and dust from the sandblaster, improving visibility and eliminating escaping dust. Perfect for cabins with a large usable area, it ensures hygienic and safe working conditions. Device description The dust absorber intended for cabin sandblasters is a complete solution equipped with an engine and a filter, ensuring effective dust removal. It is ideal for use in various types of large-area booths where sandblasting is carried out. Thanks to its advanced design, the absorber effectively removes dust from the sandblaster, which improves visibility during operation. Dust that previously escaped from the device is now effectively removed, ensuring more hygienic and safe working conditions. Bodpfjrh E Azsx Afyjwk The engine integrated with the absorber ensures high dust extraction efficiency. Thanks to this, users can enjoy the effective operation of the absorber, and sand and dust from the sandblaster are effectively collected and retained in the filter. The filter is a key element of the absorber that is responsible for retaining dust. Effectively retains dust particles and prevents them from returning to the cabin air. Thanks to this, employees are protected against inhaling harmful substances and have better air quality around them. The dust absorber intended for cabin sandblasters is not only an effective tool for maintaining cleanliness, but also ensures safe working conditions and improves the efficiency and precision of sandblasting. Technical data Extraction power 1100W Performance 3m³/min Power 230V/50Hz Noise level 85dB Inlet diameter 52 mm Handle length 280 mm Guard dimensions (height x diameter) 730 x 260 mm Filter dimensions (height x diameter) 310 x 170 mm Weight 9.5 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 4,000 mm, total length: 7,100 mm, total width: 8,100 mm, temperature: 80 °C, heating capacity: 116 kW (157.72 HP), Equipment: cabin, Complete wet paint installation with prep area, wet paint booth, mixing room, drying oven, and finishing zone. The installation can still be inspected in Diest. More details in the attachment or upon request. - Dimensions: LxWxH = 8,100 x 7,100 x 4,000 mm (external) and 8,000 x 7,000 x 3,950 mm (internal). - Height to underside of rail = 3,740 mm measured from floor level. Bwodox H Rhrepfx Afyek - With a shared sliding door with the spray booth. - Sliding doors as oven exit door: WxH = 1,200 x 3,800 mm, equipped with 1 window, 2 panels. - Emergency door with window in side wall: WxH = 800 x 1,900 mm, self-closing with door closer and latch. The emergency door is fitted with sealing rubbers, large in diameter and highly elastic EPDM quality. - Wall type: vertical double-walled sandwich panels filled with mineral wool, thickness 55 mm. Includes lighting, ventilation unit, control panel, and a complete monorail system in front of and throughout the installation up to the finishing zone.