Condition: used, machine/vehicle number: 12884, Rotor diameter: 260 mm Rotor width: 410 mm Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 410 x 260 mm Drive motor: 11 kW Djljwbwqpjqvvhusut

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: Mercodor ZM 60, torque: 15,000 Nm, power: 30 kW (40.79 HP), rotor width: 600 mm, Mercodor two-shaft shredder ZM 60 with a cutting chamber of 1200x700 mm drive via 2 planetary gearboxes with up to 15,000 NM per gearbox. Blade configuration can be different e.g. 40 mm 3 hooks or 19 mm 25 hooks also different materials are possible. Machine designed with dirt plates to protect the seals and bearings from dirt. Dolsiv Srljqvvhusut

Condition: used, HERBOLD granulator type SMS 60/100 Heavy version Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm width Duslqvswbtyyovhust (optionally as open 3- or 7-blade rotor) Drive motor 110 kw Folding device with electric winch

Year of construction: 2023, Condition: new, New drums for T5/50 and Siebo 5000 8 mm square perforation, 6 mm wall thickness from stock Duolqvveh Svcnohust Other drums on request

Condition: used, - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dolqvswcat Asvhujut Peter Stroomberg

Year of construction: 2000, operating hours: 4,923 h, Condition: used, Extec Robotrac Sea Installation, Deutz engine, Good working condition, Year 2000, only 4923 working hours. For more information, please contact us. = Further information = Fuel type: Diesel Year of manufacture: 2000 Purpose: Construction CE marking: Yes General condition: Good Technical condition: Good Visual condition: Good Duolqjwg A Dlevvhust Serial number: 6614 For more information, please contact Gerrit Haverhoek or Piet Haverhoek.

Condition: used, The company sells SPE Renergi Low Temperature Dryer -The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. -The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Dujlerb A R Noqvvhujt -Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. -Power supply Data: -Voltage 400 V AC, three phase -Recommended fuses in supply line: maximum 3x630 A -Typical power consumption: 200kW -The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). -Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. -Airflow: max 200 liter/min -Air pressure: min 4,5 bar, recommended 6,0-8,0 bar -Water supply: hot water supply, with a flow of 32 dm3/s. -Water pressure: min 1.5 bar, max 6.0 bar -Operating temperature range: -Incoming air temperature: -20°C to 50°C -Relative humidity: 0% to 60% -Raw material/media: -Relative humidity: 45% to 55% by wieght -Requested relative humidity: 8% to 15% in the dried material -Capacity: -The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load -The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. -SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: -The Machinery Directive 2006/42/EC -LVD 2006/95/EC -EMC 2004/108/EC -The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. -The dryer is already dismantled -All electrical schematics, manual, operating instructions available -Upon request, we can provide a contact person with this type of working dryer for consultation

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 3 h, Mercodor shredder ZM 44 complete machine with safety devices and switches. Siemens PLC control with overload protection etc. Machine with a cutting area of 500x380 mm knife 14 mm 3 hooks drive 7.5 KW. Dslqvoiv Sr Novhujut

Condition: used, Infeed: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor knives: 3 stator knives: 2 Drive: 7,5 kW Dujlqvvjwbtyaohujt Double diagonal cut With roller feeder, electric control unit and sound insulation box

Condition: new, Technical specifications: - Hopper opening 1850 x 1250 mm - Hopper volume approx. 3.0 m3 - Rotor diameter 500 mm - Rotor length 650 mm - Rotor speed 80 rpm - PLC control - Motor - gearbox 18.5 kW - Control cabinet (fully wired) including 5 m cable - Automatic star-delta start-up - Weight 3600 kg Djlqvvhowb Sdqousut - Power depends on material Main applications and treatable materials: Recycling and volumetric reduction of non-ferrous metals Recycling and volumetric reduction of wood waste Recycling and volumetric reduction of plastics Recycling and volumetric reduction of electrical cables and coils Recycling and volumetric reduction of plastic containers and composite materials .

Condition: used, HSM V-Press 605 waste paper baler - used The HSM baler is a compact device for reducing packaging waste by up to 95%. It is designed to compact and crush cardboard (paper sacks, waste paper, offcuts) and film (stretch film, plastic sacks). It enables them to be disposed of economically. The waste paper baler has a graphic text display informing of the machine's stage of operation and a large waste loading opening. All this contributes to the comfort of use of the baler and its easy intuitive operation. Advantages of the HSM V-Press 605 baler: - Compact size - contributes to space saving. - Crushing force of 57 kN (approx. 6 tonnes) - allows bales of up to 70 kg with dimensions of 80 x 60 x 60 cm to be formed. - Low noise level - 60.1 dB (A) - Material support claws - increases loading volume and therefore increases baling capacity. - Mechanical ejector - makes bale removal easier. - Large loading aperture - increases user comfort. - Quick and easy assembly. Dslewcpvajqvvhuout The offer concerns the HSM V-Press 605 waste paper baler: - Manufacturer: HSM - Product condition: used - Year of manufacture : 2018 - Model: V-Press 605 - Width: 119 cm - Depth: 81.5 cm - Height: 198 cm - Weight: 485 kg - Power: 1500 w - Voltage: 400 v Net price : €3499.00 each * I have large quantities, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, total width: 1,800 mm, total length: 2,950 mm, total height: 550 mm, belt width: 1,280 mm, Fe separator, overbelt magnet. Overall dimensions with gearbox (LxWxH): 2950x1800x550 mm Dujlqvvewatxtehuet Rubber belt width: 1280 mm Magnet core dimensions (LxWxH): 1580x1150x300 mm Total weight approx. 3500 kg Motor/gearbox: SEW, power 2.2 kW Machine inspected, ready for immediate use Base frame available, dimensions approx. (LxWxH): 3100x2800x6000 mm

Condition: used, Cutting mill Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Duoljwbtxpjqvvhujt Drive motor 250 kw

Condition: used, power: 160 kW (217.54 HP), New hydraulics, new blades, new bearings Delqvvjwbtv Iohueut Drive: 160.0 kW Rotor knives: 7x2 Stator blades: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Inlet: 800 x 1200 mm

Condition: used, Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame Duslqvvhewbtuwjuot

Condition: used, HERBOLD PU800 pulverizers Dujlqvvhowbtq Sjust Suitable for soft to medium-hard materials Used so far for fine grinding of plastics Diameter of grinding disks: 800 mm Drive motor: 90 kw

Condition: used, Rotor width 1000 mm Inlet 900 x 1000 mm Drive power 30 kw Dslqvvhjwbtnwjuout Machine, hydraulics, electrics completely overhauled

Condition: used, Opening: approx. 500 x 490 mm Rotor width: approx. 500 mm Djlqowbtnqsvvhujut Rotor diameter: approx. 300 mm Stator knives: 2 Rotor knives: 3

Condition: used, Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knives: 6 Duslqvswbtm Tovhuet Rotor knives: 9

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Djlqswbtmtevvhusut Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw

Condition: used, Motor 75 kW Rotor blades: 5 Stator blades: 2 Rotor diameter: 600 mm Duolswbth Dsqvvhuot Rotor width: 780 mm Inlet opening: 720x780 mm

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Duslqvewbthqevhuot Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW) Delqvvhowbtg Teuout

Condition: used, Make CONDUX Type CS 450/600-2 Hollow body granulator and regrinder for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor knives (diagonal cut), 2 stator knives Drive motor 22 kw Djlqvvjwbtfvehueut

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Djlowbhrksqvvhueut