Condition: used, Opening: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm Dsb Hn Nswbhrdj Syjut

Condition: excellent (used), Year of construction: 2000, Rotor Width : 1350 mm Rotor Diameter : 370 mm Hopper dimensions : W 1350 x 1450 mm Hydraulic infeed draw, with 45 degree tilt Siewe : Ø 30mm Extra Siewe : Ø 20mm Dsb Howf Sgmsn N Syout Screw conveyer : 5000 mm Redler/chain conveyer : 5000 mm 45 degree angle with electro magnetic separator( nails/screws) 10 feet shipping container with control panel/hydraulic station inside Complete unit still connected to power, can be examined in working condition

Condition: excellent (used), The PAL.VME 16 high-capacity screener was used in the Egger factory to sow sawdust and wood chips. Dusb Howccn Asn N Syjt

Condition: reconditioned (used), Year of construction: 2024, Functionality: fully functional, pressing force: 90 t, bale weight: 500 kg, filling opening width: 926 mm, filling opening length: 1,620 mm, bale length: 1,300 mm, total height: 1,100 mm, total length: 720 mm, input voltage: 400 V, overall weight: 25,000 kg, noise level: 85 dB, pressure: 280 bar, power: 55 kW (74.78 HP), input frequency: 50 Hz, Refurbished BOA baler type 2100 including BOA conveyor belt. Machine is quickly available and is currently in our production hall in Almelo. The machine is very suitable for pressing paper, plastic or other waste materials. Technical data BOA 2100: Drive: 55 kW Press force: 90 tons Cfg0U7Ih Bale dimensions: 1100 x 720 mm Bale weight: approx. 500 kg (depending on material) Number of tie-off wires: 4 vertical Technical data conveyor belt type 1500 KTH HS 32° 3000x8900: Horizontal length: 3,000 mm Ramp section length: 8,900 mm Drive: 2.2 kW / 400 V / 50 Hz Belt width: 1,500 mm Effective width: 1,425 mm Dusb Hovrzyqjn N Syot

Condition: excellent (used), Functionality: fully functional, Year of construction: 2006, operating hours: 5,100 h, Used Extec Robotrac Year 2006 5100 Hrs CAT Power Bofor Bars Top Deck Currently Fitted With 12mm Mesh BTM Deck Comes With A Spare Set Of 80mm Mesh Fully Guarded Machine Dueb Hn Newhw Dis Syjt Belts and Rollers All In Very Good Condition Very Tidy Unit Ready To Go Straight To Work

Condition: ready for operation (used), Tail- and drivedrums: Nr.1 drivedrum: Drumlenght 750 mm- Drum Ø 650 mm- Axislenght 1370 mm- Axis Ø 80/70 mm- Bearings. Nr.2 taildrum: Drumlenght 750 mm- Drum Ø 500 mm- Axislenght 1150 mm- Axis Ø 70 mm- Bearings. Nr.3 drivedrum: Drumlenght 750 mm- Drum Ø 650 mm- Axislenght 1570 mm- Axis Ø 125 mm- Bearings. Dujb Hn Nsvaqzys Syjt Nr.4 taildrum: Drumlenght 1150 mm- Drum Ø 520 mm- Axislenght 1550 mm- Axis Ø 100 mm- Bearings. Nr.5 taildrum: Drumlenght 950 mm- Drum Ø 630 mm- Axislenght 1290 mm- Axis Ø 100 mm- Bearings. Nr.6 drivedrum: Drumlenght 750 mm- Drum Ø 650 mm- Axislenght 1370 mm- Axis Ø 80/70 mm- Bearings. Nr.7 taildrum: Drumlenght 1300 mm- Drum Ø 630 mm- Axislenght 1870 mm- Axis Ø 160 mm- Bearings. Nr.8 taildrum: Drumlenght 950 mm- Drum Ø 650 mm- Axislenght 1350 mm- Axis Ø 110 mm- Bearings. Nr.9 taildrum: Drumlenght 750 mm- Drum Ø 600 mm- Axislenght 1150 mm- Axis Ø 110 mm- Bearings. Nr.10 taildrum: Drumlenght 1150 mm- Drum Ø 520 mm- Axislenght 1610 mm- Axis Ø 90 mm- Bearings. Nr.11 taildrum: Drumlenght 1150 mm- Drum Ø 520 mm- Axislenght 1610 mm- Axis Ø 90 mm- Bearings. Nr.12 taildrum: Drumlenght 750 mm- Drum Ø 520 mm- Axislenght 1150 mm- Axis Ø 90 mm- Bearings. Nr.13 taildrum: Drumlenght 750 mm- Drum Ø 490 mm- Axislenght 1150 mm- Axis Ø 90 mm. Nr.14 taildrum: Drumlenght 750 mm- Drum Ø 490 mm- Axislenght 1150 mm- Axis Ø 90 mm. Nr.15 taildrum: Rollengte 750 mm- Drum Ø 520 mm- Axislenght 1130 mm- Axis Ø 70 mm- Bearings. Nr.16 taildrum: Drumlenght 1100 mm- Drum Ø 650 mm- Axislenght 1700 mm- Axis Ø 130 mm- Bearings. Nr.17 drivedrum: Drumlenght 750 mm- Drum Ø 650 mm- Axislenght 1750 mm- Axis Ø 70 mm- Bearings. Nr.18 taildrum: Drumlenght 950 mm- Drum Ø 630 mm- Axislenght 1470 mm- Axis Ø 120 mm- Bearings. Nr.19 drivedrum: Drumlenght 950 mm- Drum Ø 670 mm- Axislenght 1720 mm- Axis Ø 100 mm- Bearings. Nr.20 taildrum: Drumlenght 1300 mm- Drum Ø 630 mm- Axislenght 1870 mm- Axis Ø 160 mm- Bearings. Nr.21 taildrum: Drumlenght 1150 mm- Drum Ø 600 mm- Axislenght 1650 mm- Axis Ø 125 mm- Bearings. Nr.22 taildrum: Drumlenght 1300 mm- Drum Ø 630 mm- Axislenght 1870 mm- Axis Ø 160 mm- Bearings. Nr.23 taildrum: Drumlenght 1150 mm- Drum Ø 600 mm- Axislenght 1650 mm- Axis Ø 125 mm- Bearings. Nr.24 drivedrum: Drumlenght 950 mm- Drum Ø 540 mm- Axislenght 1900 mm- Axis Ø 120 mm. Nr.25 taildrum: Drumlenght 1150 mm- Drum Ø 500 mm- Axislenght 1550 mm- Axis Ø 100 mm- Bearings. Nr.26 taildrum: Drumlenght 1300 mm- Drum Ø 630 mm- Axislenght 1870 mm- Axis Ø 160 mm- Bearings. Nr.27 taildrum: Drumlenght 1300 mm- Drum Ø 630 mm- Axislenght 1870 mm- Axis Ø 160 mm- Bearings. Nr.28 drivedrum: Drumlenght 750 mm- Drum Ø 650 mm- Axislenght 1580 mm- Axis Ø 120 mm- Bearings. Nr.29 drivedrum: Drumlenght 750 mm- Drum Ø 530 mm- Axislenght 1290 mm- Axis Ø 60 mm- Bearings. Nr.30 drivedrum: Drumlenght 750 mm- Drum Ø 660 mm- Axislenght 1360 mm- Axis Ø 70 mm- Bearings.

Condition: used, Double-shaft shredder Djb Hn N Sjwbhqteyout Drive 37.50 KW

Year of construction: 1985, Condition: used, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 18856 Duob Hnevgybps N Syst Specifications: - 1985 model - Everything comes with it - Controll box - Engine - 3 Transport lines - Small sieve - Ready for delivery Description: Older cubisator sold with 3 transport belts and a small sieve. Ready for delivery

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 200 h, Functionality: fully functional, overall weight: 29,900 kg, number of blades: 112, control cabinet length: 1,500 mm, rotor speed: 112 rpm, rotor length: 2,800 mm, power: 2 kW (2.72 HP), The LINDNER POLARIS 2800 is a powerful, high capacity single shaft shredder that is primarily used for the shredding of waste with foreign parts – like for example pre-treated domestic waste, commercial and industrial waste, as well bulky waste etc. The resultant output material is an defined granulate which could be used direct for incineration. The POLARIS 2800 can be optimally adapted for different applications by individual configuration and equipment components. Dsb Hn Nowhyyge Syeut

Condition: reconditioned (used), Year of construction: 2005, Functionality: fully functional, pressing force: 90 t, bale weight: 600 kg, filling opening width: 1,620 mm, filling opening length: 972 mm, bale height: 1,100 mm, bale width: 720 mm, overall weight: 31,000 kg, noise level: 85 dB, pressure: 300 bar, power: 175 kW (237.93 HP), BOA baler with double pre-press valves available in a fully overhauled condition. The machine is located in our workshop in Almelo and can be viewed by appointment. A matching conveyor belt (new) can be produced if necessary. The machine is equipped with a so-called refu-ram. This is perfect for pressing materials such as plastic bottles and/or shredded RDF. Duobsv Ifago Hn N Syot Technical data: Drive: 2x 55 kW Pressing force: 90 tons Bale dimensions: 1100 x 720 mm Bale weight: approx. 600 kg (depending on material) Number of tie-off wires: 5 vertical

Condition: excellent (used), Year of construction: 2015, operating hours: 8,080 h, Functionality: fully functional, Used Metso LT106 Tracked Jaw Crusher Year 2015 +/- 8080 Hrs Fitted With Swivel Fines Conveyor CAT C9 Engine With USA EPA Approval Overband Magnet Auto Lube System Wireless Remote Control Dusb Hn Nswhw Afs Syot Very Tidy Unit. Maintained To A Very High Level. Ready To Go Straight To Work

Condition: reconditioned (used), Year of construction: 2015, - complete unit - conveyor 2400 mm wide - separation hood - BLOWER FOR FILM SORTING - OVERHAULED IN OUR WORKSHOP AT D-59329 WADERSLOH - ALL MANUALS INCLUDED - YEAR OF MANUFACTURE 2015 Dsb Hn Newbh T Us Syout

Condition: used, Steep screw conveyor, screw tube stainless steel Dusb Hn Nowbhqaj Syst Factory new screw helix mild steel, factory new bearing with plug screw With drainage area, screen approx. 2,5 mm perforation Motor 4,00 kW, 53 rpm Screw helix diameter 560 mm, length 7540 mm, clear length of screw tube 7570 mm Inlet 900 long x 740 mm wide Outlet 400 mm diameter Previously used for shredded plastic waste

Year of construction: 2023, operating hours: 1,200 h, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 23TRT620048, EDGE TRT 620 demo machine - Immediately available Year of construction: 2023 Hours: 1050 Equipped with the following options: - Remote control - Magnetic belt on the fine fraction - Load control on the bunker belt - Fine fraction belt 180 degrees rotatable - Reversing fan Djb Hn Njv Ewz Rj Sysut Drum screen / drum screen / drum sieve

Condition: used, Year of construction: 2008, operating hours: 5,433 h, Type of fuel: Diesel Year of manufacture: 2008 Colour: Orange Field of application: Agriculture Empty weight: 15.000 kg CE mark: yes Arjes VZ 760 D Raptor XL. Year: 2008. Hours: 5433. Weight: 15.000 kg. CE machine. 261 KW Caterpillar engine. Liftaxle. Hooklift system. 3 way convenyor. Debswgmc Ej Hn N Syeut Tippable hopper. Radio remote Control. ID NR: 377. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Year of construction: 2025, Condition: new, Mizar SSH series + CUA series complete solutions for Cable Recycling. +SSH Series - Single Shaft Shredder -Feeding Conveyors -Overbelt Magnetic Conveyor Dujb Hn N Sog R Ibyeyjt +CUA Series Cable Recycling Machine. -Granulator -Densimetric Seperator -Dust Cyclone

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Used Komptech Crambo 3400 E Static Shredder Year 2008 Very Tidy. Maintained To A Very High Level Dujb Hnjvit Dis N Syet 125mm Screen Twin Shaft Shredding Unit Each Shaft Measures 9ft 3 Long 11ft Hopper Opening 1 x 160kW Electric Motor Integrated Electric Control Panel Unit Automatic Lubrication System Comes With 8m x 1m Discharge Conveyor 18,500 Kgs Weight

Condition: reconditioned (used), Year of construction: 2015, - complete unit - conveyor 2400 mm wide , NEW BELT - separation hood - EXTRA METAL DETECTOR - OVERHAULED IN OUR WORKSHOP AT D-59329 WADERSLOH Dob Hn N Sewbh S Doysut - ALL MANUALS INCLUDED

Condition: used, Dryer / centrifuge / dry cleaner Previously used for centrifugal drying of plastic waste. Throughput capacity 300 to 1000 kg/h depending on the type of plastic and wall thickness Dsb Hn N Sjwbhppjyeut Drive power 30 kw

Condition: used, Year of construction: 2007, operating hours: 6,246 h, Type of fuel: Diesel Year of manufacture: 2007 Colour: Blue Field of application: Agriculture Drive: Track Empty weight: 26.300 kg CE mark: yes Forus HB 396. Year: 2007. Hours: 6246. Weight: 26.300 kg. CE Machine. Radio Remote Control. Tippable hopper. Caterpillar C11 engine. 350 HP / 261 KW. 2 way convenyor. Pads: 500 mm. UC: 70%. Nice Machine! Duob Hnowgmaqo N Syst ID NR: 143. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: new, Year of construction: 2025, The CUA Series efficiently separates the internal and external components of cables for recycling. The integrated system, consisting of granulation, separation, and fan units, effectively shreds and separates 99.6% of cable components. Materials can be fed manually via a conveyor belt or automatically with the SSH Series Pre-Shredding Machine equipped with smart PLC software. Its compact structure and user-friendly PLC touch-screen control panel make management easy. The CUA Series enhances durability with high-quality components and is CE-certified. Available in three models: CUA S3, CUA M3, and CUA L3. Dsb Hn Neg R Igao Syout

Condition: used, kW: 30 Rotor diameter: 500 mm Rotor width: 1200 mm Duob Hnewbhn Ee N Syst

Condition: used, Year of construction: 2017, operating hours: 4,470 h, Type of fuel: Diesel Year of manufacture: 2017 Field of application: Agriculture Drive: Track Empty weight: 30.000 kg CE mark: yes Reference number: 56 Doppstadt DW 3060K Buffel Type F. Year: 2017. Hours: 4470. Weight: 30.000 kg. CE Machine. Radio Remote + Remote on cable. 2 way convenyor. UC: 80%. ID NR: 56. Dob Hjwgmaken N Sysut The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Dueb Hnowbhnxj N Syjt A total of four dryers of this model are available.

Condition: used, Year of construction: 2023, HERBOLD zigzag classifier (gravity classifier) Type SZS 630/175 Debswbhnfs Hn N Syjut Sifting channel 630 mm wide With blower 7.5 kw Material: mild steel Condition: unused Year of construction 2023