Condition: ready for operation (used), Year of construction: 2012, total height: 2,100 mm, controller manufacturer: ESAB, controller model: EPP-360 Vis 51, number of axes: 3, This 3-axis ESAB Combirex DX 4000 plasma cutting machine was manufactured in 2012. It features the ESAB WELDING & CUTTING Vission 51 control and a Precision Plasmarc 368 plasma source. Capable of cutting up to 40 mm with plasma and 300 mm with gas, it offers a cutting area of 3000 × 13000 mm. Consider the opportunity to buy this ESAB Combirex DX 4000 plasma cutting machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Work table height: 660–762 mm • Recommended max plate width: 3000 mm • Rail gauge: 4000 mm • Internal clearance: 3683 mm • Maximum table outside width: 3454 mm • Cutting area: 3000 × 13000 mm • Plasma cuts: up to 40 mm • Gas cuts: up to 300 mm • Parking area: 1440 mm • Power requirement: 230/460/575 vac, 50/60 hz, single-phase, 30 amp (special input voltages available upon request) Extra Information Movement Axes: 3 Max Cross Travel with 1 Tool: 3500 mm Max Cross Travel with 2 Tools: 3500 mm Max Cross Travel with 3 Tools: 3300 mm Max Cross Travel with 4 Tools: 3100 mm Ijdpfjx R E Smex Abcohw Max Cross Travel with DMX: 3130 mm Max Cross Travel with DMX + 1 Oxy: 2920 mm Max Cross Travel with DMX + 2 Oxy: 2710 mm Max Cross Travel with DMX + 3 Oxy: 2500 mm Main Drive Plasma Source: Precision Plasmarc 368 Plasma Coolant Circulator: CC-11 COOLANT CIRCULATOR

Condition: ready for operation (used), Year of construction: 2019, controller manufacturer: ABB, This Yaskawa Motoman AR1440 was manufactured in 2019. A robust welding robot, it offers precision and efficiency for your welding needs. Consider the opportunity to buy this Yaskawa Motoman AR1440 welding robot. Contact us for more information. Additional equipment • Robot arm specialized for welding • Single axis rotator • Rotating device holder disc of positioning equipment • Support page • Automatic welding head cleaning equipment • Automatic TCP checking and correction equipment • Seam detection sensor • Arc sensor seam tracking system integrated into the robot control • Complete safety system (without exhaust system) Iedpfox D Nxbox Abcohw Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,800 h, table load: 7,500 kg, This VOORTMAN V320 was manufactured in 2019. It features a Kjellberg Smart Focus 300 plasma source and a Donaldson DFPR06 extraction system. Capable of handling mild steel with a panel length range of 850 – 6,100 mm and thickness from 6 – 75 mm. It includes options for punch marking and countersinking, enhancing versatility. Consider the opportunity to buy this VOORTMAN V320 plasma cutting machine. Contact us for more information about this machine. • Workpiece size • Min./max. panel length: 850 – 6,100 mm • Min./max. panel width: 200 – 2,050 mm • Min./max. panel thickness: 6 – 75 mm • Drilling unit: VD40 • Mounting: SK 40 • Axis speed: 0 – 2,500 rpm (continuously variable, servo motor) • Drill diameter: 5 – 40 mm • Threading: M6 – M30 • Countersinking: Yes • Punch marking option: Yes • Layout marking option (optional): Yes • Automatic tool changer: 2 x VTC 5/40 (2 x 5 positions) • Lubrication/cooling: Internal cooling, air/oil • Hydraulic mounting: Yes • Rated load: 30 kW • Feeding and positioning: Synchronously driven servo motors, servo converter • Cutting – Plasma (Smart Focus 300) • Min./max. thickness: 3 – 80 mm • Max. piercing capacity: 40 mm • Virtually slag-free cutting: up to 35 mm • Marking: Yes, with the same consumables • Gases: • Plasma gas for cutting mild steel: O2 (99.9% pure, clean, dry, oil-free) • Shielding gas for mild steel: O2 / Air (99.9% pure, clean, dry, oil-free) • Marking gas: Argon; for >200 A, nitrogen • Automatic gas console: Yes • Automatic height adjustment: Yes • Ignition: Automatic • Cutting speed (mild steel): • 6 mm: approx. 3,700 mm/min @ 90 A • 12 mm: approx. 3,600 mm/min @ 200 A • 25 mm: approx. 1,600 mm/min @ 300 A • 40 mm: approx. 720 mm/min @ 300 A • 50 mm: approx. 400 mm/min @ 300 A • 80 mm: approx. 100 mm/min @ 300 A • Cutting – Oxy-fuel (oxygen cutting unit) • Nozzle type: Nozzle-mix • Automatic height adjustment: Yes Ihsdjx D N Aajpfx Abcjw • Gas supply: Magnetic valve with non-return valve • Fuel gas: Propane (optional: Acetylene) • Cutting gas: O2 • Max. thickness: 75 mm • General/installation • Working direction: Left to right • Working height: 760 mm (+/- 25 mm) • Ambient temperature: -10°C to +35°C, max. 95% relative humidity • Voltage regulator: Not included • Current transformer: Not included Additional equipment • Kjellberg Smart Focus 300 plasma source (included) • Donaldson DFPR06 extraction system (included; last filter change January 2025)

Condition: ready for operation (used), Year of construction: 2020, This 6-axis Kawasaki BA006L-A welding robot was manufactured in 2020. It features a high-performance Fronius power source and a two-axis positioner, housed in a safety-compliant enclosure for operator protection and process stability. The robot offers a maximum payload of 6 kg and a reach of 2036 mm, ideal for precise and automated MIG/MAG welding tasks. If you are looking to get high quality welding capabilities consider the Kawasaki BA006L-A machine we have for sale. Contact us for more information. • Maximum payload: 6 kg • Maximum reach: 2036 mm • Axis Working Ranges: • JT1: ±165° Ihjdpfx Abjx E Ea Tscow • JT2: +150° / –90° • JT3: +90° / –175° • JT4: ±180° • JT5: ±135° • JT6: ±360° • Axis Speeds: • JT1: 210°/s • JT2: 210°/s • JT3: 220°/s • JT4: 430°/s • JT5: 430°/s • JT6: 650°/s • Repeatability: ±0.08 mm • Maximum load capacity: 250 kg • Loading height: 708 mm • Maximum tool radius: 565 mm • Repeatability: ±0.05 mm • Mounting options: Floor / ceiling • Mounting: Floor • Ambient temperature: 0–45°C • Relative humidity: 35–85% • Emergency stop time: 0.5 s • Cooling: Water-cooled • All components are housed inside a closed, ventilated, safety-compliant enclosure, ensuring reliability, operator protection, and process stability. • System includes a high-performance power source, positioner, and complete wire-feeding and cooling systems. • Protection class: IP23 • Supply voltage: 3 × 400 V • Frequency: 50–60 Hz • Max welding current: 400 A • Min welding current: 3 A

Condition: ready for operation (used), Year of construction: 2019, This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Extra Information Robotics and Control Unit Max. payload: 15 kg Working range: 0–4500 mm Digital inputs/outputs: 16 Serial interface: Yes CAN bus: Yes USB interfaces: 2 Flash memory: 8 GB Buffer module: 24 V Expandable to up to 12 axes Iodsx D Hdhepfx Abcohw Welding Technology Power source: Included Welding interface: Integrated Welding and function test: Included Torch cleaning: CMR-8-C torch cleaning device, upright Robotic welding torch: Included Sensors Tactile sensor: Yes Arc sensor: Included Technical Data of Workpiece Positioner Load capacity: 10 kN Nominal torque: max. 1600 Nm Tilting moment: max. 8800 Nm Mass moment of inertia: 900 kgm² Rotation range: +,- 360° Swivel range: 370° Welding Fume Extraction Extraction capacity: 3000 - 4320 m³/h Motor power: 5.5 kW Connection voltage: 3 x 400V/50 Hz Noise level: 65 dB(A) Weight: 640 kg Dimensions (W x D x H): 1413 x 1413 x 2110 mm

Condition: ready for operation (used), Year of construction: 2021, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information. • Working dimensions: 1500 x 3000 mm • Permissible plate thickness: stable construction up to 100 mm material thickness • Guides/Drives: high-quality linear guides and double-sided clearance-free drive • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic Core gas console • Table surface: grid cover in the cutting table Iedpfxeycvq Aj Abcehw • Height control: "THC" module for automatic height regulation via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: double-sided rope safety system (collision protection) for the gantry via Emergency Stop • Visual signaling: 2-color LED signal tower on the gantry bridge • Operation interface: externally standing MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Condition: ready for operation (used), Year of construction: 2017, controller manufacturer: MicroStep, This MicroStep Fiber MSF 3001.15L was manufactured in 2017. It features a 3m x 1.5m cutting table, 4kW IPG YLS laser source, and a HighYag cutting head for perpendicular cuts only. It includes Donaldson extraction and filtration equipment and automatic layout planning software for flat sheets. Consider the opportunity to buy this MicroStep Fiber MSF 3001.15L fiber laser cutting machine. Contact us for more information. Additional equipment • 4kW IPG YLS laser source • Donaldson extraction and filtration equipment • Automatic layout planning software for flat sheets Machine Benefits Technical Machine Benefits • 3m x 1. 5m cutting table with hydraulic pallet changer • Highyag cutting head for perpendicular cutting only Iodpfx Abeyaiy Sscshw Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2016, laser power: 6,000 W, overall weight: 15,500 kg, number of axes: 3, This 3-axis Mazak OPT IPLEX 3015 Fiber II was manufactured in 2016. It features a 6 kW fiber laser, Mazatrol Preview 3 control, and a machining size of 3050 × 1525 mm. Equipped with advanced features like auto nozzle changing, auto focus positioning, and intelligent monitoring functions, it ensures precise and efficient operations. Consider the opportunity to buy this Mazak OPT IPLEX 3015 Fiber II fiber laser cutting machine. Contact us for more information. • Working hours: 53,000 h • Control/Controller: MAZATROL Preview 3 • Mazak Control Box: Included Ihjdex I Sm Ejpfx Abcsw • Machining size: 3050 × 1525 mm • Resonator: IPG • Torch: Multi-Control Torch 2.0 (upgraded) • Intelligent Setup Function (ISF) • Auto nozzle changing (8 holders) • Auto nozzle cleaning • Auto focus positioning • Beam diameter change function • Intelligent Monitoring Function (IMF) • Pierce detection • Burn detection • Plasma detection • Protective window sensor • Condensing lens sensor • Elementary diagram: DD628101002 • Rated capacity: 57 kVA • Power supply: 3AC 380 V, 50/60 Hz • Auxiliary voltages: AC 100 V / DC 24 V Additional equipment • Chip conveyor: Yes • Dust collector: Donaldson • Chiller: IPG • Workpiece lifter: Yes

Condition: ready for operation (used), Year of construction: 2022, This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Additional equipment • operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) • slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm • RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table • Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers Machine Benefits Technical Machine Benefits • Max reach: 1300 mm • Welding technology: torch holder incl. Integrated freedrivetaster, fronis cmt torch • Ergonomic holder for ur teach panel • Supports all welding positions and ensures accessibility Ihedpjx D E Husfx Abcsw • Floor stand for free-standing axis on two columns including leveling plates for installation • The tools shown in the pictures and the 3 cabinets are included. Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2021, operating hours: 900 h, number of axes: 3, This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information. • Operating hours: less than 800 hours • First commissioning: September 2021 • Working area: 4020 × 2020 mm (4 m × 2 m) • Design: Cantilever (gooseneck-type) structure Ihsdpfxox Sz A Ro Abcow • Axes: 3 axes (X, Y, Z) driven by ball screws • Software & control: FlowMaster license included; FlowMaster programming/control installed on the machine control station and an additional customer PC • Abrasive waterjet cutting system: • Cutting head: Flow PASER 4 with high-pressure ON/OFF valve • High-pressure generation: • Pump: Flow Hyplex Prime 30 ultra-high-pressure pump • Maximum pressure: 4,150 bar • Features: High efficiency with integrated autonomous cooling • Workpiece support tank: Heavy-duty painted steel tank, independent from the machine axes Additional equipment • High-pressure piping kit (from pump to cutting head) • Laser pointer for positioning (red dot for program alignment) • UltraPierce system (abrasive suction/Venturi) for chip-free piercing of sensitive materials (glass, stone, composites, plexiglass) • EcoFlow cutting sludge extraction system with pneumatic diaphragm pumps and hopper for abrasive recovery into a big bag • Flow abrasive feeding system

Condition: used, Year of construction: 2013, Trumpf TruLaser 5030 Fiber with Double Tower Storage System - Laser Cutting Machine - Working area: 3000 x 1500 mm - Laser power: 5000 W - incl. LiftMaster Compact & TruStore 3030 - Year of manufacture: 2013 Equipment - Working area: 3000 x 1500 mm - Enclosed machine frame - Integrated cabinet - Automatic longitudinal pallet changer - Torque drive combined with linear direct drive - Enclosed beam guidance via fiber optic cable (LLK) - Chiller unit (water/air) - Integrated electrical cabinets with internal lighting - TruDisk power supply via the machine - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning Trumpf Laser - LLK according to standard layout (laser directly next to the machine) - Laser chiller unit (water/air) - Excitation via pump diodes - Laser power control - Laser log function Ihedpsym Umkefx Abcjw Cutting Unit - Universal cutting unit with fully adaptive lens system - Cutting head strategy - Protective glass against lens contamination - State monitoring of the protective glass - ControlLine: height control and sheet edge detection Control - Simple workshop programming - Advanced workshop programming - Fast reproduction - Sinumerik 840D SL control - 17" color touchscreen - Integrated technology database - Automatic shutdown - Programmable selection of cutting gas/pressure - FastLine - FlyLine Safety - CE marking - Light barriers - Multi-chamber extraction system - Integrated compact dust extractor - Fire detection system in dust extractor - Machine enclosure with certified viewing window / right-hand door - Electric roll-top roof LiftMaster Compact - Basic unit with synchronous loader, peeling device and sheet thickness gauge, movable destacking rake, incl. loading/unpacking station - Low-scratch, precise unloading (includes stainless steel rake with belt tines, tine spacing 67 mm; up to s= 15 mm) - Cleaning brush for support bars - Separation of thin sheet for synchronous loader (0.8 - 2.0 mm) TruStore 3030 Double Tower Storage System - Base module 3000 x 1500 mm - Integration of LiftMaster Compact - Storage compartment extension for LiftMaster Compact - 2 × extension module 1.9 (for max. 9 storage compartments, loading height 90 mm, without pallets, module height 1980 mm) - Storage and retrieval device - Extension of storage and retrieval device for extension module - 34 storage compartments 90 mm, incl. pallet - 10 pallet bases

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Sold without cutting table. Ihjdpev I U Hcofx Abcsw

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Coil dispenser for wire Lincoln Idealarc DC-600 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 600 Amps at 100%. Welding equipment: Idealarc DC600 220/380/440 3/50/60 Input voltage: 220/380/440V Input current: 116/67/58A Input Hertz: 50/60 Input phase: 3 Input power: 220/380/440V/3/50/60 Ijdpsu Afwlofx Abcohw Output range: CV:70A/13V - 780A/44V DC:90A/24V - 780A/44V Rated output: 600A/44V/100%. 680A/44V/60%.

Condition: excellent (used), Year of construction: 2009, Brand: Oerlikon / SAF Model: LP100 Year 2009 Type: Self-aligning/Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm. Turning speed: 100-1200mm/min. Ihodpfx Abelffdyecjw Wheel width: 235mm Wheel diameter: 450mm Distance between translation wheels: 1930mm between tabs Translation speed: 4m/min. It has a cable control with buttons for the direction of rotation, speed variator and translation of the turner. Power: Three-phase 380V They have manual and Ce.

Year of construction: 2002, condition: refurbished (used), Cutting table / Plasma cutting gantry Brand: SATO Model: SATRONIK HD 8000 Year 2002 Number of heads: 2 Ihedpfxjhzbi Nj Abcjw - 1 Kjellberg FineFocus 800 cutting head - 1 Kjellberg FineMaker marking head with PB-M25 W torch Maximum wide cutting capacity: 6,000mm Maximum length wide cut: 24,000mm Controller: SATOCNC 3000 Cutting equipment information: Brand: Kjellberg Model: FineFocus 800 Maximum cutting capacity: 80mm Cutting quality up to: 60mm Maximum drilling capacity: 40mm Maximum current at 100%: 300A Automatic gas console

Condition: new, load capacity: 2,000 kg, rotary table diameter: 1,300 mm, pivoting range: 120 °, Capacity: 2,000 kg Max. height center of gravity: 250 mm Max. center of gravity eccentricity: 200 mm Table diameter: 1,300 mm Motor power: 1,1 + 1,5kw Isdpjuf Nm Hsfx Abcjhw Table tilt (Motorized): Tilt speed 0.67 rpm Rotation speed: 0.12 - 1.2 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 1000 Amps at 100%. Iodpfx Asu Afttsbcehw Idealarc® DC-1000 Submerged Arc Welder Input voltage: 230/460 Input current: 193/96.5A Input Hertz: 60 Input phase: 3 Input power: 230/460/3/60 Mode icon: DC/DC Output range: 150-1300A DC,16-46V Polarity: DC Nominal output: 1000A/44V/100%

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Brand: Kemppi Model: Pro 3000 / Promig 500 Ihedexf Hv Hepfx Abcjw Water-cooled unit with Kemppi PRO Cool 10 chiller. TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel - Functions for TIG welding: pre-gas, post-gas, arc, high frequency TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel - 4 feed rollers - Pulsed arc current with Synergic panel - Dedicated functions for welding steel, stainless steel and aluminum Includes: - TIG welding torch - MIG welding torch - Earth cable - Gas regulator

Condition: new, load capacity: 10,000 kg, rotational speed (distance/time): 1,000 mm/min, Capacity: 10Tn Type: Self-aligning Minimum diameter: 320 mm Maximum diameter: 2.800 mm Wheel dimensions: 300 x 160 mm (Diameter x Width) Wheel coating: Polyurethane rubber Rotation speed (Min.-Max.): 100 - 1.000 mm/min. Motor power: 1,1 KW Ijdeuf A Ahjpfx Abcehw Inverter: Danfoss Electrical components: Schneider Included: 1 motor-driven + 1 idler Control unit with 6 meter extension pole and digital display with the speed of rotation.

Condition: new, load capacity: 5,000 kg, rotary table diameter: 1,500 mm, pivoting range: 120 °, Capacity: 5,000 kg Max. height center of gravity: 300 mm Max. center of gravity eccentricity: 200 mm Table diameter: 1.500 mm Isdpfsuf Nu Rex Abcjhw Motor power: 2,2 + 3kw Table tilt (Motorized): Tilting speed 0.14 rpm Rotation speed: 0.05 - 0.5 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Condition: new, load capacity: 300 kg, rotary table diameter: 600 mm, Capacity: 300 kg Max. height center of gravity: 200mm Max. eccentricity center gravity: 150mm Table diameter: 600 mm Motor power: 0,37kw Table tilting: Manual, by handwheel Rotation speed: 0,1 - 1,0 rpm Manual operation: By foot pedal (right and left hand rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-90 Drive: Danfoss Isdpfxeuf Nk Eo Abcjhw Electrical components: Schneider

Condition: good (used), overall weight: 2,400 kg, OXIPLASMA Kompak EKO 3100x1600mm Plasma Cutting Table Brand: OXIPLASMA Model: Kompak EKO 316 Manufactured: 2018 (Installed at client for operation in 2021) Description: Useful cutting capacities: 3,100x1,600mm Ihsdpfx Aewlrukjbcsw Travel speed: 30 m/min Positioning accuracy: +/- 0.1 mm Motorization: Brushless servos (4 interpolated servo motors (x, y1, y2, z)) Double guidance and traction system Height control managed by the CNC Anti-collision detector with inductive electromechanical impact control Suction table sectioned by zones using the CNC Hypertherm EDGE CONNECT CNC 19" touchscreen Useful head lift: 120 mm Weight: 2,400 kg Cutting capacity: Carbon steel: 32 mm Stainless steel: 20 mm Includes: - Hypertherm HPR 130 XD high-definition plasma equipment - Hypertherm gas console - ROLLAIR RLR 700 screw air compressor, 7.5 HP, year 2007, 10 Bar 5,402 hours - BEKO DryPoint RA air dryer

Year of construction: 2002, condition: refurbished (used), flame cutting gantry Brand: SATO Model: SATRONIK HD 8000 8 Oxyfuel torches (2 TRIPLEX torches) SATO control with gas console. Year 2000 Isdpfx Aehzbi Tebcohw Useful cutting capacity: 6,000x24,000mm

Condition: new, load capacity: 100 kg, rotary table diameter: 400 mm, Capacity: 100kg Max. height center of gravity: 150mm Max. eccentricity. center of gravity: 100mm Table diameter: 400mm Motor power: 0,2kw Table tilt: Manual, by handwheel Rotation speed: 0.4 - 4.0 rpm Ijdeuf Niujpfx Abcjhw Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0 - 90 Inverter: Danfoss Electrical components: Schneider

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: AC, total height: 680 mm, total width: 340 mm, total length: 680 mm, input voltage: 230 V, overall weight: 38 kg, type of cooling: air, electrical fuse: 16 A, laser power: 800 W, shaft length: 1,080 mm, continuous power: 800 kW (1,087.70 HP), Equipment: documentation/manual, head guard, Operation - Simplest operation via synergy characteristic curves - Achieve a finished weld in just three steps. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hotstart, etc. - High-resolution display ensures optimal readability of all necessary parameters. An integrated help function provides better understanding of setting options - Fully integrated operation in the wire feeder case – operation via the machine or wire feeder selectable Technical Features - 20µm single-mode laser source - High-performance laser cells paired with gas-cooled torches provide maximum power and focus stability - 2-in-1 machine: welding and cleaning: laser cleaning is ideal for paint removal, rust removal, and scale removal - Optional: dual wire feed Safety - Dual-channel emergency stop system - Dual-channel safety interface for access control (door contact switch) - Key switch to prevent unauthorized use - Dual-channel fiber break detection and monitored QBH connection Iodpoyuvqmsfx Abcshw - Safety notices and manual activation of the laser release at every start - Dual-action pushbuttons prevent unintentional laser activation - Suitable for heavy-duty applications Advantages of Laser Welding Compared to Conventional Welding Processes - Hardly any distortion, incredibly fast, and outstanding quality (even on extremely thin materials < 1 mm) - Uses approximately 70% less energy - Fast and easy to learn - High process reliability - Extreme time savings with significantly reduced rework - One of the lightest torches on the market at approx. 680 g - Dual-channel safety loop for maximum safety Advantages of Craft-Laser - Laser cleaning with up to 100 mm scanning width and autofocus - 2-in-1 machine: welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more tedious shipping