Condition: refurbished (used), Power rating at 50%: 25kVA Short-circuit current: 22,5kA Electrode force: 600daN weight: 51,5kg Dusbvdtjpbbx To Tfjt --- with Electrode arm 170mm --- option welding contro B200/MPS1036 --- warranty: 6 months

Condition: good (used), I am selling a Metco 9MP powder feeder. Dsbvdtou S Tgds Tfeut

Condition: good (used), 1 used welding robot REIS RV6 Serial number: 5207700, operating hours: 26,613 with enclosure, approx. 250x250 cm, rotary table 3 kVA, with RITTAL Techline cooling unit, Duobewatf Hevdt Tfot EWM Phoenix 522 welding source RC Pulse force

Condition: ready for operation (used), Year of construction: 2014, operating hours: 200 h, General Data Machine weight 5200 kg Main Drive Number of axis 2 This Intermac primus 322 Waterjet cutting machine was manufactured in the year 2014 in Italy and has 200 working hours. It is equipped with a working table, a pressure system, a PC unit with CAM/CAD drivers, a controller and a silo for technological sand water treating system. It is compatible with DXF, DWG, PDF, CDR, etc. The machine is in very good conditions. Application Types Cutting Djbvouahd Hodt Tfeut

Condition: excellent (used), Suitable for butt welding of series parts Welding ranges wire: Ø1-9 mm (steel < 0.25% C), Ø1-6 mm (steel > 0.25% C) Welding ranges tape: 3 - 50 mm² Smallest thickness: 0.25 mm largest width: 50 mm With manual The machine has been cleaned, checked and is ready for immediate use. The butt fusion machine is in very good condition. Debvsv H Rwnedt Tfjut

Year of construction: 2006, Condition: used, Technical data: Application: Laser, plasma and oxy-fuel cutting, grinding & welding Materials: Steel and stainless steel sheets, dry and oil-free Debvdedfbknet Tfjut Cartridges / solenoid valves: 6 / 6 Nominal volume flow: 3,600 m 3 /h (with cartridge load of 600 m³/h) Filter area: 84 m² (21 m² per cartridge) Dust collecting container Air input diameter: 300 mm air outlet diameter: 350 mm Air temperature/humidity: < 60 ° C / < 50% Permissible concentration of oil: 3 mg / m ³ Compressed air: min. 6-7 bar at the feed point, dry and oil-free Compressed air consumption: Max 18 nm ³/h - ± 50 NLiter per pulse with max 6 per minute Filtration degree: 99.99% Dust emissions: < 1 mg / m ³ Cabinet: 400 V, 3-phase, 50/60 Hz Control unit: 24 VAC, 50 Hz Noise level: < 73 dBA ± 2 dBA plus pulse charge of < 10 dBA ± 2 dBA Colour: RAL 5015 width x depth: 1.305 x 1.382 mm Weight: 640 kg Engine: 7.5 kW 13.2 A 32 A 4.234 PA 6,500 m3/h 2.635 mm 2,870 mm

Condition: new, Year of construction: 2025, Power at 50%: 80kVA Duobvdtjwfxxio Tfet Short circuit-current: 35kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm --- Weld control: MPS 10beta (5-times, 8-program) --- Warranty: 12 months --- Spotwelding electrodes + spare parts at stock

Condition: good (used), I sell Dalex- Werke PMS11-3 spot welding machine, 172KVA, in bdb condition. Dujbvdt Tju Sb Dtjfot

Condition: good (used), Functionality: fully functional, load capacity: 6,000 kg, table load: 6,000 kg, Welding turntable with a 6-ton load capacity with hand and dual-foot remote controls In perfect condition, with no defects, extremely robust, indestructible, and simple technology for easy maintenance. Speed continuously adjustable from 0.02 to 1.0 rpm Tilt angle 135° and speed display with dual-foot remote control and additional hand-held remote control Diameter of the clamping plate: 1650 mm Height tilted to the center of the plate: 1450 mm Height horizontal: 1650 mm Length: 2200 mm Width: 1200 mm The machine can be lowered by 200 mm upon request (by removing the lower rail). Duobvdt Tjwam Ihofot

Condition: like new (used), Functionality: fully functional, warranty duration: 3 months, type of cooling: air, welding current (max.): 350 A, For Sale: Lascentrum MIG 350 DP Demo Model 350 AMP Synergic Pulse Double Pulse Including: 3 meter new MIG/MAG Welding torch, New earth work cable, New gas cable, and 3 months warranty. With this machine you can weld Steel, Stainless Steel, and Aluminum. Debvdtjwbr Sbe Tfsut Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Year of construction: 2001, 2-station cell with ABB IRB 1400 welding robot (Under Storm) Year of production: 2001 Maximum reach: 1440 mm Maximum load capacity: 5 kg Dusbegb Dx Aovdt Tfjt Welding source: KEMPPI 520 R Power of the welding machine: 520 A Price: ̶1̶6̶ ̶0̶0̶0̶0̶ € - 25% - 12 000 €

Condition: ready for operation (used), Year of construction: 2015, Functionality: fully functional, laser power: 2,000 W, Equipment: cooling unit, Laser for pipes and profiles with a 2kw Fiber source, due to the pass-through construction, processing is possible without length limitations. Dobowcpw Rovdt Tfjut

Condition: new, Year of construction: 2025, Power at 50%: 30kVA Duebvewfxxcodt Tfot Short-circuit current: 20kA Electrode force: 420daN Throat depth: 380-700mm --- Weld control: RS 17 (5-times, 2-program) --- Extra Equipment: - double foot pedal "currentless contact" --- Warranty: 12 months --- Spotwelding electrodes + spare parts at stock

Condition: used, Year of construction: 1972, throat 300 mm Djbjtn Enrevdt Tfeut short circuit voltage 118 kVA voltage 380 V rated capacity bei 50% ED = 50 kVA weight of the machine ca. 700 kg dimensions of the machine ca. 0,65 x 1,20 x 2,00 m

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Column Lifting Rotating Device with 5-Ton Capacity Duebvowak U Eedt Tfet Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 5000 kg, 360° Minimum Working Height: 700 mm Maximum Working Height: 1600 mm Speed: 0.5 rpm Clamping Plate Diameter: 700 mm Rotating Motion: 1.1 kW 2 to 10-Ton Capacity Available Upon Request

Condition: refurbished (used), Functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current (max.): 300 A, For sale: Kemppi FastMig KMS 300 300 AMP Water-cooled Refurbished + Serviced Including: MIG/MAG Welding torch, earht work cable with clamp, gas cable, 5 meter interconnection hose, and 3 months warranty. With this machine you can weld Steel and Stainless Steel. Test welding is possible. A video of the machine in welding condition is possible. Dujbvowbr N Tedt Tfst We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), Year of construction: 2021, Technical specifications: Welding of longitudinal and circumferential seams Horizontal working range: max. 3,000 mm Vertical working range: max. 3,000 mm Stationary system Single-wire welding: 4 mm Power source: ESAB LAF 1001 Year of manufacture: 2021 Power: 1,000 A Submerged arc powder preparation Dsbowfzzyjvdt Tfeut CE mark Condition: System was only used for one job; in almost new condition

Condition: good (used), welding current (max.): 850 A, Equipment: type plate available, I will sell a Lincoln DC 655 power source, I have 10 pieces Dujbvdsvn Et Tst Tfot

Condition: new, Year of construction: 2025, Power at 50%: 20kVA Short-circuit current: 15kA Electrode force: 420daN Throat depth: 130-500mm --- Debvewfxw Eodt Tfout Weld control: RS 17 (5-times, 2-program) --- Extra Equipment: - double foot pedal "currentless contact" --- Warranty: 12 months --- Spotwelding electrodes + spare parts at stock

Condition: new, Year of construction: 2024, table length 1000 mm Dsbvdt Tjuia N Tofout table width 1000 mm table height 200 mm weight 300 kg Our welding tables are manufactured with HT 300 casting quality. All welding tables are also available in a nitrided version. • Plate thickness: 25mm All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum 665 mm. Thus, a working height of 820 - 865 mm is possible. Further details on the production and characteristics of our tables can be found in our catalogue. The illustrations do not correspond to the original size and are for llustration purposes only. 3D welding table - 3D clamping devices - 3D precision welding table

Condition: new, Year of construction: 2025, Functionality: fully functional, load capacity: 900 kg, Equipment: foot remote control, Protec KT 900 kg load capacity Horizontal capacity: 900 kg Tilt capacity: 900 kg Clamping disc diameter: 650 mm Bore diameter: 110 mm Dobvowak Swodt Tfout Tilt angle: 90° Speed: 0.05 to 0.5 rpm (Speed: 0.05 to 1.1 rpm for an additional charge of €350) Infinitely adjustable tilt With handheld remote control, digital speed display, and foot-operated remote control

Condition: refurbished (used), Power at 50%: 30kVA Short-circuit current: 20kA Duobvdt Towfxv Ujfst Electrode force: 360daN Throat depth: 130-500mm --- Weld control: RS 15 (2-times, 1-program) --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: good (used), load capacity: 2,000 kg, Welding turntable with a 2-ton load capacity with hand and foot remote control Infinitely adjustable speed and inclination Good condition, robust and indestructible machine Duebvdjwak Ewjt Tfet Tilt height to center: 1.05 meters Horizontal height: 1.3 meters Diameter: 1.3 meters Length: 2.2 meters Width: 1.4 meters Speed: 0.01 rpm to approximately 1.0 rpm

Condition: new, Year of construction: 2025, Power at 50%: 50kVA Short circuit-current: 19kA Electrode force: 470daN / single stroke Throat depth: 250mm --- Weld control: WS 708 (7-times, 8-program) --- Extra Equipment: - two-hand-start / foot pedal - main switch --- Dujbjtq Ezxovdt Tfet Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: refurbished (used), Power rating at 50%: 16kVA Short-circuit current: 13,5kA Electrode force: 270daN weight: 39,5kg --- Debevmrfyovdt Tfeut with Electrode arm 350mm --- welding control B100/MPS 10beta --- Balancer D5/45 --- warranty: 6 months