Condition: used, Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 3232, working width: 1,500 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, For sale is a MicroStep CNC cutting system from the MG series, model MG 6001.15PrkGB+CH500P, manufactured in 2022, with approximately 2,000 operating hours. Equipment: - Plasma rotator for weld preparation with Kjellberg Q 3000 plasma power source - Fully automatic oxy-fuel support Bwsdpfxoz A Tk No Af Aou - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Pipe cutting device RSV 30-300 - Filter system TEKA ZPF 6H with 11 kW Technical data: Working area approx. 6,000 x 1,500 mm + 500 mm clearance Max. travel height approx. 150 mm Max. table load approx. 100 mm Guideways in the X-axis: Linear guideways with helical gear racks Drives: Digital, maintenance-free AC servo motors with IRC Positioning speed up to 40,000 mm/min. Positioning accuracy ≤ 0.06 mm/m Bidirectional repeatability 0.05 mm/m Inspection: An inspection is possible at the location in Wörth a. d. Isar. Interested? The machine is offered in an online auction. Further information and documents are available upon request. Simply contact us!

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, load capacity: 800 kg, - Stationary scissor lift table with single scissors - Steel perforated grid plate System 16 - Platform size: 2000x1000x100 mm - Hole spacing: 50 mm - Hole diameter: 16 mm - 360-degree rotary platform beneath the grid plate - Grid system with 4 stops every 90 degrees - Lift up/down operated by a hand control with 3 m cable - Battery-hydraulic drive - Load capacity: 700 kg - Construction height: 670 +/- 60 mm - Useful lift: 700 mm - Maximum height: 1370 +/- 60 mm - Own weight: approx. 810 kg - Stationary version with 4 base plates. Bedpfx Aoxazzyof Aswu

Condition: used, Plasma impulse gas metal arc welding machine, pulse machine EWM Type Tetrix 400 Plasma / Tetrix 400 DC-P Robot Plasma welding and soldering machine Art. No.: Serial No.: Year of manufacture 2003 Output: 400 amps = 40% duty cycle 360 amps = 60% duty cycle 300 amps = 100% duty cycle Setting range: stepless Open-circuit voltage: approx. 26 volts Mains connection: 400 volts, 50 Hz, 32 amps plug Bwedpfozwb R Njx Af Aeu - Digital display for current - Digital display for voltage, job, and program - Various welding programs can be selected - Pulse mode - Separate 4-roller wire feeder EWM, Type DV cold wire hand with connecting hose package approx. 5 meters - Approx. 4 meter hose package - External EWM water cooling, Type Cool 71 U41 DKF - External high-voltage unit - Welding machine equipped with 1 mm welding wire Space required L x W x H: 1300 x 640 x 1830 mm Weight: 245 kg Very good condition

Condition: good (used), Year of construction: 2016, functionality: fully functional, Includes 1 arm. Bsdpfoz Dv Dnox Af Aewu

Condition: used, Year of construction: 2011, CNC gantry plasma cutting machine Manufacturer: Eckert Type: Jantar 2 Year of manufacture: 2011 Bwedpfx Asy Nqcbsf Aou CNC control Working area: 2 x 4 m 1 plasma torch with Kjellberg HiFocus 161i power source Automatic gas console Extraction table

Condition: used, Year of construction: 2008, Plasma power source for plasma cutting machine Manufacturer: Kjellberg Type: HiFocus 80i Year of manufacture: 2008 Power: 80A Cutting thickness: 0.5 to 25 mm Includes hose package and torch Manual gas console Bwsdpfx Afszn Hp Se Aou 28926

Condition: used, Year of construction: 2026, total height: 800 mm, total length: 3,000 mm, total width: 1,500 mm, Colour: Grey Empty weight: 1.500 kg The price does not include accessories. Bwsdpszry Rdjfx Af Aju - Year: 2026 - Documentation available: No - CE certificate present: No - Model: Hardened metal - Table length [mm]: 3000 - Table width [mm]: 1500 - Table top thickness [mm]: 15 - Transport dimensions: 3000mm x 1500mm x 800mm (l x w x h) - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2013, operating hours: 11,556 h, functionality: fully functional, type of cooling: water, laser power: 500 W, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, LASER welding unit - AL 500 CWS Average power 500 W Bwsdpfxjz Eu Syo Af Asu Emergency stop switch on the resonator CWS laser power supply Pulse peak power 17 kW Pulse frequency 0-100 Hz Incl. deflection flange 3 x 400 V, 50-60 Hz, 3 x 32 A ALFlak motion system Travel range (X, Y, Z) 340 × 330 × 370 mm Equipment: Ergokeil 5°-25° Ergonomic wedge for microscope Tilting/swiveling optics AL500 LED-UW HP Focusing objective f=120, ultra-white diode ring light Protective glass swivel joint ALFlak X, Y and Z can be locked independently Eyepiece 16x magnification Rotating axis module ALFlak with chuck ø 125 mm / internal ø 24 mm Tiltable for horizontal to vertical rotation.

Condition: new, number 93 Positionen weight 320 kg condition neu 28 mm Bwodpfsyv I Eaex Af Aju dimensions 1,0 x 0,6 x 0,85 m Special 93-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, number 102 Positionen weight 320 kg condition neu Bjdpoyv I Hdofx Af Aowu 28 mm dimensions 1,0 x 0,6 x 0,85 m Special 102-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Bedpfxsyv I Hwo Af Aowu Including base bearings, 110mm diameter

Condition: new, table length 1200 mm table width 800 mm table height 980 mm Bwodpfx Asyv I Inof Asu weight of the machine ca. 0.95 t Workstation - Hole diameter: 28 mm - Grid: 100 x 100 mm - Side panels: 150 mm - Panel thickness: 10 mm

Condition: new, welding current max. 250 A open-circuit voltage max. 66 Volt connected load frequency 400 V Bwsdpfxjy Aa Ito Af Asu weight 65 kg Dimensions (LxWxH) 900 x 500 x 750 mm MIG/MAG gas-shielded welding machine: incl. 3m hose package.

Condition: used, Year of construction: 1985, chucking diameter 315 mm table load 300 Kg turning speeds 0,1 - 4,0 U/min connected load frequency 220 V bore diameter 63 mm weight 0,09 t Dimensions (LxWxH) 0,8 x 0,6 x 1,2 m Welding turntable incl. Bwodpfx Afez Dky Ds Aou - 315 mm chuck - 3-axis torch holder - Cutting torch - Machine base frame

Condition: new, table diameter 1600 mm table load 8 t swivelling range 0 - 130 Grad turning speeds 0,05- 0,5 U/min table height adjustment von 1210 bis 2238 mm max. torque on the faceplate 1200 Nm welding current 700 Ampere Bwjdpfx Afsfv Azhe Aou including remote control and welding current transmission.

Condition: new, number 37 Positionen 28 mm condition neu weight 29 kg Basic set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Bolt: 8 x 280511 Bwsdsgazl Repfx Af Aou Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,19 t dimensions 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Bwodpsga Nh Hsfx Af Asu Spacer ring 800653.N is required for clamping with bolts 280510/280511.

Condition: new, number 27 Positionen weight 52 kg condition neu 28 mm P-Set 1:27 pieces, 28mm system (15mm), consisting of: Bedpfx Afjgp Dyus Aowu Clamps: 5 Sk. 100 / 350mm Stop: 2 pieces 500mm Stop: 2 pieces 150mm Angle: 2 pieces 175 x 175mm Flat angles: 2 pieces. 350 x 250mm Flat angles: 2 pieces 275 x 150mm Eccentric discs 2 pcs. 100mm Quick release bolts: 10 pcs.

Condition: new, table length 1590 mm table width 1490 mm table height 840 - 890 mm weight of the machine ca. 0,4 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 Bjdpjh Dqb Dofx Af Aowu The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, table length 1200 mm table width 1200 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,261 t dimensions 1,2 x 1,2 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Bwedpfjftd T Sjx Af Asu Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: new, number 57 Positionen weight 98 kg condition neu 28 mm Bwsdpjfh Uw Refx Af Asu Set 2: 57 pieces, 28mm system, consisting of: Clamps: 6 x 280610.N Clamps: 4 x 280630.N Prism: 4 x 280648.1.N Bolt: 18 x 160511 Magnetic bolt 4 x 280740 Stop: 6 x 280410.N Stop: 6 x 280420.N Angle: 4 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Accessory set. 1 x 283999 Price plus packaging and transport.

Condition: new, volume capacity 2500 m3/h 0 3000 mm total power requirement 1,1 kW weight of the machine ca. 0,08 t Bjdpfx Afsfrzt Uj Aewu dimensions of the machine ca. 0,58x0,58x0,58 m

Condition: new, table diameter 495 mm table load 300 / 150 Kg swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall manuell turning speeds 0,5 - 3,2 U/min spindle bore 65 mm Torque 375 Nm welding current 500 Ampere Bjdpel R Nnvefx Af Aowu connected load frequency 230 Volt Welding turntable with hollow shaft 300kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal

Condition: new, table length 1500 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,8 t dimensions 1,5 x 1,5 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Bodjmhm Auepfx Af Ajwu Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,5 t dimensions 3,0 x 1,5 x 0,9 m Welding table with accessories - Table size: 3000x1500x200 mm - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Surface bores 100x100 mm grid - Corners, edges and bores chamfered at 45° - Side wall height 200 mm - Side wall bores in diagonal grid Bwodpsxwzd Nefx Af Aeu - Construction reinforced with ribs Accessories: - 6x 280610.N screw clamp - 12x 280511 quick-release bolts - 8x 280420.N universal stop - 2x 280110.N stop and clamping angle - 2x 280162.N stop and clamping angle - 1x 283999 care set