Condition: excellent (used), Year of construction: 2016, Portal plasma cutting system KOIKE MOD. DELTATEX 4000. Useful vertical transversal cut: mm 3,000. Useful vertical longitudinal cut: mm 12,000. Length of runways: mm 14,000. Movement speed: mm/min 24,000. Gantry guide system: X - Y axes, rack and pinion. Gisdpjv Sua Rjfx Albsu Type of trolleys installed: 1x Trolley for KOIKE 3D Link plasma support. Numerical Control: KoiKe Katana. Source: KJELLBERG HF 280i. Recommended cutting capacity plasma KJELLBERG HF 280i.: Cooling unit KWE 360. -Vertical plasma: 35 mm (in production) CS/SS. -Maximum vertical plasma breakthrough: 40 mm CS/SS. Visible in operation, excellent condition.

Condition: new, Technical specifications Two-phase mains voltage : 400 V. Mains frequency : 50/60 Hz. Max. puncture current : 9700 A. No-load voltage MAX : 2,6 V. Thickness MAX tacking 2 sides : 3+3 mm. Max electrode force : 190 daN. Arms projection : 330 mm. Godpfx Aljhzg Ihsbeiu Nominal power X=50% : 22 kw. Nominal power X=50% : 15 kw. Power factor : 0.7 (cosphi). Intermittence ratio : 15%. Dimensions : 79 - 32 - 128 cm. Weight : 118 kg. Resistance welder (tacking machine) with column, swinging arm, with digital microprocessor control. The multifunction LCD digital panel allows to operate: in EASY mode (setting of current and tacking time); in EXPERT mode (setting of different tacking parameters) with the possibility to save up to 20 customized programs. Continuous and pulsed operation guarantees excellent welds on various types of steels. Features: adjustment of the welding current (%), welding time (cycles), pressure and speed of electrode closing choice of various welding cycle parameters (approach time, ramp time, welding time, pause time and number of pulses) easy-to-read LCD display pneumatic drive thermal protection with signaling air flow regulation for the slowing down of the arms closure Model requires cooling

Condition: used, Year of construction: 2009, filter area: 80 m², suction capacity: 8,000 m³/h, DANTHERM dust extractor, welding fume extraction, automatic self-cleaning cartridge filter, pneumatic, vacuum type for plasma cutting, laser, sandblasting, soda blasting, shot blasting, plastics and catalytic converters, mineral processes, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing explosion risk. Fan power: 11 kW with frequency inverter. Airflow capacity: 8,000 m³/h – 10,000 m³/h Filtration surface area: 80 m² Inlet diameter: 250 mm Stock no.: 1090 Gjdeyq Nygjpfx Alboiu

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Godpfxjl Dw U Ds Albsiu Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system Giodoib Dadjpfx Albou "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: good (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 8070850, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: IPG Photonics GmbH, laser power: 4,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, overall weight: 420 kg, total length: 856 mm, total width: 806 mm, total height: 1,186 mm, Equipment: cooling unit, Technical Data Manufacturer: IPG Laser GmbH Laser Model: YLS-4000-S2-IHE Gijdpfx Alezc Hpvjbju Serial Number (SN): 8070850 Rated Voltage: 400V AC +-10% 3P/PE Frequency: 50/60 Hz Full Load Current: 80 A Fuses: 80A / 120kA Date of Manufacture: 08.12.2008 Wiring Diagram: G25-16-70820-4 Cooler Wiring Diagram: G25-16-61012-4 Certification: CE marking Wavelength: 1070 nm Wavelength Bandwidth: approx. 1070 nm – 1080 nm Rated Output Power: 4.0 kW Laser Class: Class 4 Power Control: 10% to 100% Typical Fiber Diameter (Delivery Fiber): Mostly 100 µm (micrometers) Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Gjbn N Ay Dowza Dxogoil Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, Plasma cutting unit HYPERTHERM, Type Max 100 Plasma cutter with machine torch Machine No. 70-2513, Year of manufacture 1990 Power: 100 Amps = 80% duty cycle 89 Amps = 100% duty cycle Gsdpfx Aleyah Saobsiu Cutting capacity: up to 32 mm material thickness Adjustment range: stepless Hose package length: 22 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 63 Amps plug - Hose package with machine torch (hand torch without switch) - Spare nozzles for the plasma cutting torch - Separate push button switch for starting the plasma cutter Space requirement L x W x H: 850 x 700 x 1100 mm Weight: 225 kg Good condition Ideal for retrofitting to an oxy-fuel cutting machine.

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Laser on time: approx. 45,500 hours Giodpfx Alozcvx Tsbou Includes Loadmaster.

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, overall weight: 255 kg, table load: 200 kg, A table with a lower extraction system combines a workbench with an exhaust/filtration system. Fumes and dust are extracted through the tabletop and rear panel and filtered using filters mounted in the table structure. The table can be placed anywhere, at any welding or grinding station. Gsdpfxozaugwe Alboiu A three-stage spark separator enhances safety and meets the most stringent international guidelines for fumes and dust. DraftMax Ultra features an automatic filter cleaning mechanism that is activated when the fan is turned off (cleaning in the off state) or when the pressure difference before the filter exceeds a certain value. The presence of compressed air is continuously monitored. Furthermore, an automatic start/stop device can be added to the DraftMax Ultra, providing even easier operation of the table. This is an ideal table for very intensive welding or grinding applications. Work surface dimensions: 1366 mm x 750 mm Weight: 255 kg Noise level: 74 dB Supply voltage: 400 V/3~/50 Hz Motor power: 2.2 kW Efficiency: 2500 m³/h Filtration area: 2 x 26 m² Filtration efficiency: >99.9% (filter class: M) Stock number: 1149

Condition: used, 1 used welding machine Manufacturer: Fronius Model: Synergic 3400 G/W/E Suitable for welding steel, stainless steel, and aluminium using the MIG/MAG process. Technical specifications: Max. welding current: 340 A Wire diameter: 0.8/1.0/1.2 mm possible Connection voltage: 380 volts Duty cycle (ED) 35% at 340 A Digital display Giodpfx Aeyl Id Tolbju Dimensions (L x W x H): 890 x 460 x 945 mm Total weight: 139 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Kawasaki RA006L Robot with E-Controller Year of manufacture: 2022 Control unit: FE1 E-Controller Max. payload: 6 kg Max. working range: approx. 1650 mm Godpfxsympvts Albjiu Standard configuration consists of: • Robot kinematics • Controller (10 m cable to robot kinematics) • Teach pendant (10 m cable to controller) Interfaces: • RS232 • 2x Ethernet (individually configurable) • 2x USB • 32 digital inputs / 32 digital outputs (freely assignable) • User interface on robot upper arm R-Series 12E / 8A / 2x air (10 mm) (The signals from the user interface are available in addition to the 32 inputs and 32 outputs.)

Condition: good (used), Year of construction: 2015, 1 used shielding gas welding machine Daihen /OTC M 380-S Year of manufacture 2015 Current range 30-380A Welding power at 100% duty cycle 270A Welding wire 0.8-1.6 mm Wire feed 0.1-22 m/min With 4-roller wire feeder with encoder control Gedpfjxnqnxjx Albeiu

Condition: good (used), 1 MIG/MAG welding machine Manufacturer: Merkle Model: MobiMIG 320 K Technical specifications: Input voltage: 3 x 400 V Adjustment range: 25 - 320 amps Duty cycle: 40% at 300 amps, 60% at 270 amps, 100% at 240 amps Gijdpfxsxpf N Tj Albou Current adjustment: stepless Cooling: Inverter cooled by integrated fan; Torch: gas-cooled Design: portable assembly unit Wire feed mechanism: 4-roll drive DV 26 Fuse protection: 16 amps Dimensions: 600 x 300 x 565 mm

Condition: good (used), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 with separate wire feed case Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Weldable wires, steel [Ø in mm]: 0.6 - 1.6 Weldable wires, stainless steel [Ø in mm]: 0.8 - 1.2 Weldable wires, aluminium [Ø in mm]: 1 - 1.6 Weldable wires, CuSi [Ø in mm]: 0.8 - 1.2 Voltage adjustment: Continuous MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Weldable electrodes [Ø in mm]: 1.5 - 8 Electrode duty cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Process-independent data Open circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Mains: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Line protection 3~ (50/60 Hz) [A]: 32 Positive mains tolerance 3~ (50/60 Hz) [%]: 15 Negative mains tolerance 3~ (50/60 Hz) [%]: 15 Mains plug: CEE 32 Standards and approvals Protection class: IP32S Insulating material class: F Gjdpfx Aljy Ia Hmobeiu Standard: EN 60974-01 Marking/Certification: CE, S Cooling type: Gas-cooled, water-cooled Cooling Nominal cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Dimensions wire feeder case (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Condition: used, Year of construction: 2011, 1 used welding machine Manufacturer: Merkle Type: MobiARC 280 cel Year: 2011 Technical data: Welding inverter Merkle MobiARC 280 cel+ - with accessories Primary winding : Mains voltage: 400 V, mains frequency: 50/60 Hz, power consumption: 8,3/5,5 | 9,7/8,3 kW, power consumption: 12/8 | 14/12 A, maximum current: 21/16 A, cos φ: 0.98, E-hand welding : electrode diameter: 1.5-6.0 mm open circuit voltage: 96 / 90 V Welding voltage: 20.6-31.20 V Welding current: 15-280 A, current at 60 %: 250 / 260 A TIG welding : open circuit voltage: 96 / 90 V, welding voltage: 10-21.2 V, welding current: 5-280 A, current at 60 %: 250 / 270 A, : , Insulation class: H, Gedpfx Aeh Nvfnolboiu Protection class: IP23, operating modes: E-Hand, TIG (DC), cooling: AF, Overall dimensions: 485x200x435 mm Weight: 17,5 kg

Condition: used, 1 unit ESAB MIG 505W welding machine Color: as shown in the pictures, see pictures and inspection Condition: used Location of goods: production hall Giodpezclw Sjfx Albsu Payment method: prepayment by bank transfer Shipping: pick-up only at the Coburg location

Condition: used, functionality: fully functional, Spot Welding Machine Fab. Dalex Type SF 8 Technical Data Manufacturer: Dalex Type: SF 8 Rated power at 50% duty cycle: 8 kVA Rated primary voltage: 380 V / 50 Hz Max. welding power: 23.7 kVA Max. short-circuit current: 8.8 kA Cooling water flow rate: 4 l/min Electrode force: 17 to 390 daN Open circuit voltage: 2 to 3.2 V Stages: 4 Throat depth: 235 mm Dimensions: L 750 x W 350 x H 1100 mm Weight: 77.5 kg Giedpfx Aex Ic T Ajlbou All information without guarantee. A demonstration can be arranged at any time in our exhibition hall.

Condition: good (used), Welded frame, used Manufacturer: CREA-SWISS Technical Data Brand: CREA-SWISS Max. frame size: 3,000 x 2,400 mm Min. frame size: 470 x 610 mm Profile height: up to 115 mm Height tolerance compensation: from -1 mm to +1 mm Dimensions: L 3.6 x W 1.5 x H 2.0 m Weight: 280 kg Advantages - Single-operator device: set external dimensions, insert profiles, adjust height differences, and weld completely on both sides, all by one person - Precise adjustment for accurate frame construction Gedpfjy At A Dex Albeiu - Rotatable around the longitudinal axis - Fully welded in a single clamping - Fine adjustment of miter edges - Mobile workstation on castors - Suitable for all types of frames (steel windows, fire doors, or angle steel frames) All information provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 6,000 mm, controller manufacturer: ESAB, controller model: Vision 51, number of axes: 4, This 4-axis ESAB Combirex CXD P 3500 was manufactured in 1997. It features a cutting current of 100 A and is capable of handling a maximum recommended cutting thickness of 31.8 mm for mild steel and stainless steel, and 25.4 mm for aluminum. If you are looking to get high-quality plasma cutting capabilities, consider the ESAB Combirex CXD P 3500 machine we have for sale. Contact us for further details. • Supply Voltage: 230 V • Apparant Power: 4.0 kVA • Frequency: 50 Hz • Power Source: Hypertherm Powermax 1650 • Cutting Current: 100 A • Torch Type: T100M Torch • Track length 8m • Track gauge 3.5m • Torch-to-Work Distance: 3.2 mm • Maximum Recommended Cutting Thickness (Mild Steel): 31.8 mm • Maximum Recommended Cutting Thickness (Stainless Steel): 31.8 mm • Maximum Recommended Cutting Thickness (Aluminium): 25.4 mm Godpfx Ajzc Rmfolbeiu

Condition: good (used), Versch Demmler welding table, also available individually with numerous accessories. 1 piece, 2000x4000 mm 3 pieces, 2000x1000 mm Gijdpfx Aey Hf Ndolbeu Thickness: 200 mm, hole spacing: 100 mm Table extensions: 1500 x 200 mm, 3 pieces Table extensions: 1000 x 200 mm, 2 pieces

Condition: used, 1 unit MIG/MAG gas-shielded welding and soldering system GYS T3GYS AUTO with various accessories Color: as shown in the pictures, according to the images and inspection Condition: used Location of the goods: Hall 1 Payment method: prepayment by bank transfer Gedpfx Aozcmazelbeiu Shipping: Self-collection only from the Hofgeismar location.

Condition: new, Year of construction: 2026, The WP300 self-centering three-jaw chuck is a specialist accessory designed for clamping pipes and workpieces with cylindrical or hexagonal cross-sections in welding positioners and welding rotators. Thanks to its precise self-centering clamping mechanism, it ensures secure and accurate positioning of the workpiece during rotation, which results in higher quality and repeatability of the welding process. Key advantages of the WP300 chuck Precise self-centering mechanism – enables quick and accurate centering of pipes and workpieces, eliminating the need for manual positioning. High versatility – compatible with many welding rotators and positioners, including models PS310, PS320, and PS360. Stable clamping – thanks to three independent jaws, the workpiece remains securely clamped even at high rotational speeds. Robust construction – made of high-grade materials resistant to vibration, loads, and harsh welding environments. Optimal working diameter – the ability to clamp pipes up to 270 mm in diameter allows for a wide range of applications. Design and technology The WP300 model features a compact and durable steel construction designed for intensive operation. The three-jaw mechanism operates synchronously, automatically positioning the workpiece on the axis of rotation. The large outer diameter (300 mm) and the through bore (100 mm) allow for handling a wide range of workpiece dimensions. The mounting holes are designed to ensure full compatibility with CORMAK welding positioners. Precision and efficiency The WP300 chuck provides high clamping repeatability, which translates into precise circumferential welds. It shortens workpiece preparation time and reduces setup errors, increasing production efficiency and improving operator safety. The solid construction ensures stable operation even under dynamic loads. Applications The WP300 chuck is intended for use in circumferential welding processes, particularly in manufacturing plants, metalworking workshops, and companies involved in steel structure prefabrication. It is used with welding rotators and welding positioners, enhancing their functionality and versatility. Technical data Max. pipe diameter: 270 mm Outer diameter: 300 mm Inner diameter (through bore): 100 mm Mounting hole spacing: 105 mm Bolt hole diameter: 9 mm For welding positioners: PS310, PS320, PS360 Giedpfxjycqpte Albju Weight: 14 kg

Condition: new, Year of construction: 2026, The WP200 self-centring 3-jaw chuck is a professional accessory designed for use with welding positioners and welding rotators such as models PS310 and PS320. Its precise clamping mechanism allows quick, stable, and concentric fastening of pipes and cylindrical or hexagonal parts, significantly improving the efficiency and safety of circumferential welding. Main advantages of the WP200 chuck Giedpfx Alsycqnvjbsu Self-centring 3-jaw mechanism – ensures even and stable clamping of workpieces regardless of their shape. Versatility – compatible with most welding rotators and welding positioners, including CORMAK PS310 and PS320. Clamping precision – perfect alignment of workpieces translates into better weld quality and smooth rotation. Durable construction – robust body made from high-strength materials resistant to heavy mechanical and thermal loads. Compact size and easy installation – low weight and precisely positioned mounting holes ensure quick integration with welding equipment. Design and technology The WP200 chuck features three high-quality jaws designed to automatically centre the workpiece on the rotational axis. Its outer diameter of 200 mm and inner diameter of 80 mm allow clamping of workpieces up to 170 mm in diameter. The body is made of high-grade steel, providing excellent resistance to deformation during long-term use. Precision and efficiency The WP200 self-centring 3-jaw mechanism significantly reduces setup time for welding operations. The elimination of backlash and positioning errors directly improves the quality of circumferential welds. Stable clamping of workpieces also enhances operator safety during welding. Applications The WP200 chuck is designed for use with welding rotators, welding positioners, and welding manipulators in operations involving pipes, flanges, rings, and cylindrical components. It is ideal for welding workshops, manufacturing plants, and the steel construction industry. Technical parameters Max pipe diameter: 170 mm Outer diameter: 200 mm Inner diameter: 80 mm Mounting hole spacing: 85 mm Mounting hole diameter: 9 mm For welding positioner: PS310, PS320 Weight: 10 kg

Condition: good (used), Wire electrode, welding wire, welding wire, flux-cored wire -Welding wire: flux-cored wire, drum with unwinding device -Wire: Aluminum Ø 2.4 mm Godpfx Alszcv Rpebjiu -Roller: Ø630 x 460 mm -Transport dimensions: 680/640/H690 mm -Weight: 238 kg

Condition: used, Year of construction: 2000, functionality: fully functional, Compact resistance butt welding machine from IDEAL-Werk (C.+E. Jungeblodt GmbH, Lippstadt, Germany) for joining band saw blades quickly and reliably. The BAS 050-11 is the entry-level workhorse of the BAS series — ideal for workshops, saw doctors, and sawmills that weld narrower carbon and bi-metal blades and need a dependable, low-footprint machine. Built to the usual IDEAL standard: solid German engineering, simple operation, and the kind of longevity that keeps these machines in daily service decades after they leave the factory. Technical Specifications Type: BAS 050-11 Year of manufacture: 2000 Rated output at 50% ED: 4.5 kVA Connected load: 4.5 kVA Open-circuit (welding) voltage: 2.6 / 4.4 V Gisdpfjzcqn Nsx Albeu Max. upsetting force: 2.2 kN Primary voltage: 415 V Frequency: 50–60 Hz Fuse protection: 16 A CE marked — Made in Germany Resistance butt welding for clean, strong blade joints Two-stage welding voltage (2.6 / 4.4 V) for flexibility across blade types Compact and robust — built for continuous shop use Steel strip: 6-50 mm Bandsaw for wood: 6-50 mm Metal bandsaw, bimetallic and tungsten alloys: 6-32 mm Hoop knife: 6-30 mm Stainless steel bandsaw: 6-30 mm