Hydr. Press brake

AMADA HFP50/20 2000 x 50 to

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, workpiece weight (max.): 800 kg, overall weight: 5,000 kg, total length: 5,000 mm, total width: 2,500 mm, total height: 2,200 mm, warranty duration: 12 months, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, working range: 3,000 mm, With the OR-S1530, Oree Laser offers a compact and easy-to-operate laser cutting system in large format. Our company, SF-Tech Engineering GmbH, is the Swiss representative of Oree Laser. All machines are newly imported and assembled according to customer requirements. We also provide training and service. In our showroom you can test the OR-S1530 including all accessories (high pressure compressor, suction system...). Iedsr D N Dzopfx Ab Ija Technical data Working area: 3060mm X 1530mm External dimensions: L:4950, W:2300, H:2130 Weight: approx. 4'500kg Positioning accuracy: 0.03mm Max. Cutting speed: 115m/min Maximum acceleration: 0.8G Laser power: 6000 Watt Laser source: MAX Cutting head: Raytool or BOCI Fume extraction: Zone controlled fume extraction The side machine door can be easily raised or lowered at the touch of a button. The total height of the machine is 2200mm. The work table can be easily pulled out of the side of the machine by hand. This enables safe and fast loading and unloading of the machine. There are two new variants: 1st variant, a 60% extension table, without support on the floor, max. 800kg load. 2nd variant, a 120% extension table, with fold-out arms, max. 900 kg load. Do not hesitate to visit us in our showroom in 6281 Hochdorf.

Condition: new, Year of construction: 2025, Genie Z45/25 JDC electric articulated telescopic boom lift, new, used, demonstration machines available Ijdpfxsrhkp Ns Ab Ija

Condition: used, No. 04485 Veneer press Ott JU 2513 Used Electrically heated heating plates Hydraulic pressing pressure Aluminum heating plates Plate dimensions 2550 x 1350 mm LW BUSSE heating plates renewed in 2019 and covered with Mylar film 4 hydraulic cylinders each 90 mm diameter Total pressing pressure 90 tons Specific pressing pressure 2.8 - 4.0 kg/cm2 Button control for closing / opening / stop Emergency stop rip cord Opening width 400 mm Total power 19 kW Isdpjw Npbzsfx Ab Ija Stable construction with 3 longitudinal beams in the upper part of the press and 2 longitudinal beams in the press table Transport dimensions approx. 2900 x 1500 x 2000 mm LWH Weight approx. 4200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 1979, x-travel 800 mm Isdpowwwqhsfx Ab Ija y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, pipe diameter (max.): 127 mm, bending angle (max.): 182 °, bending radius (max.): 400 mm, mandrel length: 4,000 mm, overall weight: 16,000 kg, total length: 7,000 mm, total width: 2,200 mm, total height: 1,800 mm, input voltage: 400 V, type of input current: three-phase, feed length Z-axis: 4,000 mm, wall thickness: 5 mm, Equipment: documentation/manual, Capacity, Ø mm / 127 x 5 Radius, min./max. / 50/400 Bending speed/repeatability / 40º/s. ±0,1° Mandrel length 4 000 Weight, kg 16 000 Motor kW / 40 Ijdpfxeu Rf E Eo Ab Isa Length feed 900 mm/sec Degree of tolerance 0.05-0.1°/mm Tools: 63 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 6,050 h, functionality: fully functional, travel distance X-axis: 213 mm, travel distance Y-axis: 572 mm, Haas turning center Type: ST 25 Year 2017 Hours of operation 6047h Ijdpfx Absrdg H Hs Ija Maximum power rating, drive system 22.4 kW, belt drive Bar capacity, maximum speed 76.0 mm, 3400 r p m Axis movement range (X, Z) 213 mm, 572 mm Chip extraction Spindle clearance 75mm

Year of construction: 2022, condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm Ijdpfxsiwfp Te Ab Ija - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller - WILA upper tool clamp - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier - 24 months warranty - Commissioning, training

Year of construction: 2012, condition: good (used), Manufacturer: Gipo AG Type: B 1370 Year of manufacture: 2012 Inlet size: 1.320 x 680mm Included: Iedpfx Absilh Efs Ioa – Frame – Pre-Screen – Electrical motors for Crusher and Pre-screen Spare jaws in stock!

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9518 202-5, Offer 24361 Technical data: - 3 individually motor-driven rollers manual + controlled operation - Max. Torque per roll 1600 Nm - Stroke of bending roller X-axis approx. 265 mm - Lower rollers laterally adjustable 200 - 1000 mm - Shaft diameter 105 mm - Roll diameter up to approx. 260 mm - Effective length of standard shafts approx. 300 mm - Shaft rotation infinitely variable 1 - 22 rpm - Bending capacity e.g. - Round tube 1" Ø 350 mm - Round tube 4" Ø 2000 mm - Flat bar 300 x 15 Ø 600 mm Isdpfjt Nfv Tjx Ab Ija - Roller drive 400 V / 3 x 1.1 kW - Hydr. drive 400 V / 3 kW - Weight approx. 1200 kg - Weight of accessories approx. kg - Space requirement approx. W 1250 x H 1400 x D 1700 mm - with: - PC 100 control unit in separate control panel - Lateral straightening rollers horizontally + vertically adjustable - Standard bending set for flat and angled material - Steel + plastic tube roller sets

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 4,000 W, power: 4 kW (5.44 HP), warranty duration: 12 months, Equipment: documentation/manual, TRADE FAIR MACHINE AT A SPECIAL PRICE!!! SF 1530G 4KW Max 5G laser source with Precitec head. Also enables cutting of aluminium! This compact machine with a side pull-out table is space-saving, while still capable of processing large-format sheets. Cutting area: 1500x3000 mm. Also ideal for your business! Cutting up to 18 mm (mild steel S235) possible!! Iodpfxeqwzuxe Ab Isa