Clamping plate 3500 x 2000 x 350 mm

Asquith

Condition: excellent (used), overall weight: 4,600 kg, total height: 305 mm, total length: 4,000 mm, total width: 1,640 mm, Floorplate Length: 4000mm Floorplate Width: 1640mm Height: 305mm No. Of T-slots: 5 Distance from T to T-slot / Jump:330mm T -slot size: 28mm Number of matching pieces: 1 Length: 4000mm Width: 1640mm Height: 305mm Weight: 4600kg Nodpfx Akoy D Ngnofjla Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), CTS Type: C-40/60 CTS small climate chamber air-cooled Test volume: 60 liters Nljdpfsu Hlb Ejx Akfja Temperature range: -40 °C / +180 °C Humidity range 10% to 98% relative humidity +10 °C to +90 °C in the temperature range +5 °C to +89.5 °C in the dew point range Dimensions (WxDxH): Inside: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal voltage: 230V 1/N 50 Hz Output: 3.3 kW Rated current: 13 A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Asquith 9 ft OD 4 Radial Arm Drill. Nedpfx Akjymg Rnofola Tee Slotted double sided box table, brake, coolant, light.

Condition: excellent (used), Year of construction: 2021, total width: 1,500 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Number of matching pieces:2 Length: 1200mm Width: 1500mm Height: 3500mm Nodpfx Aoxhgfmekfola Weight: 7000kg

Condition: good (used), total height: 350 mm, overall weight: 5,000 kg, total width: 1,500 mm, table height: 350 mm, total length: 4,200 mm, Used steel clamping table 4200 x 1500 x 350 mm Weight approx. 5000 kg Nodpfeuzaafox Akfela

Condition: good (used), total length: 4,700 mm, total width: 1,500 mm, plate height: 355 mm, Manufacturer: ASQUITH Type: SDT Year built: 1990 Specifications Metric US Standard Length: 4700 mm Width: 1500 mm Height: 355 mm Nsdpfx Aewp Erwskfsla Number of T-slots: 6 Distance T-slots / pitch: 250 mm T-slot size: 34 mm Number of matching pieces: 2 Dimensions (Estimated) Length: 4700 mm Width: 1500 mm Height: 355 mm Weight: 5400 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, you will not find any representation or contractual conditions. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2021, total width: 1,000 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Angles plate ASQUITH - HT-35/10 MACH-ID 9260 Make: ASQUITH Type: HT-35/10 Year: 2021 Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Number of matching pieces:1 Length: 1200mm Nodpfx Asxhgg Dokfjla Width: 1000mm Height: 3500mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 430 mm, side roll diameter: 300 mm, roller diameter: 480 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,420 mm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, overall weight: 20,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 20 kW (27.19 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, model capacity 3000x35 mm Digital readout Hydraulic 4 roll plate bending machine, used year 2017 plate thickness rolling 35 mm Nedpfxoyu Nr Do Akfjla pre-bend 30 mm minimum rolling diameter ID 480 mm plate max width on the rollers 3100 mm top roll size 430 mm Power on hydraulic unit 20kW Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted Digital position readout Hydraulic rotation central rolls driven parallelism lifetime with torsion bar Pre-pinch load adjustable for pre-bending Drop-end top roll front open for unloading Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics – CE declaration of quality machine dimension 5500x2000x2100 mm weight 20ton --- Additional accessories installed with the machine See layout drawing in enclosed nr.1 central support hydraulic 4 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 4 ton doble arm nr. 1 side support hydraulic right side 4 ton double arm

Condition: good (used), Year of construction: 1993, total length: 1,400 mm, total width: 795 mm, total height: 920 mm, Manufacturer: ASQUITH Type: TB-1400 Year of manufacture: 1993 3 matching pieces Weight 2300 kg each Taper fabricated construction Specifications Metric US Standard Number of T slots 5 Up and 5 Down Pitch from T to T 260 mm T-slot dimension 28 mm Number of T-slotted sides 2 Dimensions (Estimate) Length 1400 mm Width 795 mm Height 920 mm Weight 2300 kg Nlodpowpvd Rjfx Akfea Please note: The information on this page was obtained by us to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but the accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you check all important details.

Condition: good (used), total length: 7,500 mm, total width: 2,400 mm, plate height: 300 mm, Manufacturer: ASQUITH Type: DT-75 Year of manufacture: 1990 Specifications Metric US Standard Length 7500 mm Width 2400 mm Height 300 mm Number of T-slots 8 T-slot spacing / Step 300 mm T-slot size 36 mm Number of matching pieces 2 Dimensions (Estimated) Length 7500 mm Width 2400 mm Height 300 mm Weight 15840 kg Nljdewp Ekyspfx Akfea Please note: The information on this page has been provided by us to the best of our knowledge and belief, and where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 550 mm, roller (top) diameter: 550 mm, side roll diameter: 450 mm, roller length: 3,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 70 kW (95.17 HP), warranty duration: 12 months, Equipment: emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT * The bottom and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overloading * The top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * Easy roll position reading via three digital indicators * Easy removal of bent parts thanks to hydraulically opening head and automatically lifting shaft * Very user-friendly operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support when bending large diameters * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Njdpfx Akjxbzptjfola Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Condition: good (used), total length: 5,500 mm, total width: 2,290 mm, plate height: 300 mm, Manufacturer: ASQUITH Type: Cast iron Year of construction: 1980 + 6136 = Field 5500 x 4130 mm Specifications Metric US Standard Length 5500 mm Width Nljdpswp Hhyjfx Akfsa 2290 mm Height 300 mm Number of T-slots 8 T-slot distance / spacing 285 mm T -slot size 32 mm Weight per plate approx. 8 kg Dimensions (estimated) Length 5500 mm Width 2290 mm Height 300 mm Weight 0 kg Please note: The information on this page has been provided by us to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, you do not represent any representation or contractual terms. We recommend that you check all important details.

Condition: good (used), total length: 5,000 mm, total width: 2,000 mm, plate height: 350 mm, Manufacturer: ASQUITH Type: DRG Year of manufacture: 1980 Specifications Metric US Standard Length 5000 mm Width 2000 mm Height 350 mm Number of T-slots 8 Distance between T-slots / step 240 mm T-slot size 35 mm Number of matching pieces 1 Dimensions (estimated) Length Nledpfxewp Eqye Akfsa 5000 mm Width 2000 mm Height 350 mm Weight 7500 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms arise from it. We recommend verifying all important details.

Condition: used, Technical details: floor-plate length: 5500 mm plate width: 2150 mm plate height: 340 mm Plate thickness: 340 mm weight of the machine ca.: 9,0 t transport dimensions LxWxH: ca. 5,5 x 2,2 x 0,35 m Material cast steel Milled, finished surface Nsdpfx Akoval Nfjfola T-slots according to DIN 650: a=28; h=46; b=48; c=21mm Center distance 150 / 230 mm *

Condition: good (used), total length: 3,500 mm, total width: 1,100 mm, plate height: 250 mm, Manufacturer: ASQUITH Year of manufacture: 1990 Specifications Metric US Standard Length 3500 mm Width 1100 mm Height 250 mm Number of T-slots 6 + 3 T-slot spacing / jump 365 mm T-slot size 48 mm Weight per plate approx. 2900 kg Number of matching pieces 1 Dimensions (Estimate) Length Njdpewp Hacofx Akfela 3500 mm Width 1100 mm Height 250 mm Weight 2900 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contract terms are made. We recommend checking all important details.