Three-jaw chuck

Bergmans 4110 Ø 255 mm

Condition: used, Year of construction: 2016, controller manufacturer: Hurco, controller model: MAX5, _____ Description: Year of manuf. : 2016 Control : Hurco MAX5 Speed : 12000 rpm Movement X/Y/Z : 1625/864/762 mm Spindle: Technology:Belt-driven spindle Speed:12.000 rpm Power (max.):18 kW Torque (max.):239 Nm Kdedoxpb Swjpfx Adwog Taper:SK40 Workingtable: Clamping surface:1.676 x 889 mm Tableloading (max.):2.722 kg In general: Toolmagazine:40 Stations Rapid travers in X/Y/Z:18/18/13,5 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internaal cooling unit with filter and High-pressure, 20 bar Workpiecemeasurement:Touchprobe, Renishaw OMP 60 Toolmeasurement:Probe, Renishaw TS27R Setup operations:Electronic handwheel Furhter Equipment:Chiller, Trafo Further Accessory:Misc. toolholder

Condition: good (used), Drill bits, twist drills, drill bits -Manufacturer: Maysso / Ilix, twist drill 4 pieces Ø 24 - 26.5 mm Kodpfsrqinqex Adwsdg -Type: double cutter, MK3 mounts -Size: 1x Ø 24/25.5/26/26.5 mm each -Price/tax: complete -on request: different sizes/quantities available from additional stock -Transport dimensions: 290/100/H30 mm -Weight: 2.5 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 2,135 mm, travel distance Y-axis: 865 mm, travel distance Z-axis: 762 mm, controller manufacturer: Hurco, controller model: Winmax, table width: 865 mm, table length: 2,185 mm, overall weight: 17,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 40 bar, HURCO VMX 84 T40 Vertical Machining Center Year of manufacture: 2010 Control: WinMax (Version 08.01.09.23 ST) Technical specifications: Drive power: 18 kW Speed: 10 - 12,000 rpm Tool holder: SK 40 Number of magazine positions: 40 Internal coolant supply: 20 bar Ksdev Sm Hvjpfx Adwedg Travel paths: X-axis: 2,135 mm Y-axis: 865 mm Z-axis: 762 mm Accessories: -Chip conveyor -External coolant system with 600-liter tank capacity -Spindle cooler

Condition: ready for operation (used), machine/vehicle number: 17331, grinding area: 200 x 35 mm Kedpfx Aded Ixbcowsdg electrical connection: 380 V, 0,55 kW space needed: 530 x 400 x 1180 mm weight:

Condition: good (used), Year of construction: 2001, Lathe – cycle-controlled Manufacturer: WEILER Kodpfxexl Ulps Adwjdg Machine Model: E 35 Control: Siemens / Weiler D2 Year of manufacture: 2001 TECHNICAL DATA Distance between centers (mm): 950 Center height (mm): 200 Max. turning diameter over cross-slide (mm): 200 Max. turning diameter over bed (mm): 410 Spindle - Max. speed (rpm): 3,000 Tailstock - Internal taper: MT 4 Connected load (kW): 10 DIMENSIONS & WEIGHT Length x width x height approx. (mm): 2,300 x 1,400 x 1,700 Weight approx. (kg): 2,100 Specifications and data are subject to change and errors.

Condition: excellent (used), Eccentric chuck with key (28133) in sturdy wooden transport box make Klopfer type EZ 32 diameter 160 mm total diameter 265 mm height 180 mm KK receptacle size 5 Kdodjgzlmwepfx Adweg cone diameter 82,575 mm bolt circle diameter 104,8 mm eccentric adjustment range 0 - 32 mm Mounting flange can be exchanged if required

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Kdedpfsqlgvhjx Adwjg -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 160 mm -Passage: Ø 42 mm -Hole circle: Ø 133 mm -Receptacle: Short cone 6 / cone 103 - 105 mm -Weight: 10.5 kg

Condition: new, Diameter: 260mm Bore: 70mm with short taper mount according to DIN 55027: Gr. 6 Ksdsi El Avspfx Adwedg

Condition: used, Chuck outer Ø: 240 mm Bore: 75 mm Overall height: 105 mm Kedodaqdmjpfx Adwjdg equipped with short taper chuck flange according to DIN 55027, size 6 incl. jaws stepped outward and inward, chuck key

Condition: good (used), Hilma machine vice 200mm Good condition, fully functional. Jaw width 200mm, clamping range approx. 110mm. Kdsdpfx Adevpuw Dsweg