Single Edgebanders

BIESSE STREAM B/11.5

Condition: used, Year of construction: 2018, functionality: fully functional, ∙ BQ-470 (2018) - USED - HORIZON BQ-470 (EVA) Total Counter: 609212 - AC-470L (Delivery Conveyor Long) - VS-470 (Smoke Extractor) Fedpfxexr S Ars Ag Rsft ∙ Specifications Binding Modes: Binding with milling, Binding without milling, and Pad binding Number of Clamps: 4 Book Block Size (Top-Bottom x Fore-edge) Max. 320 x 320 mm Min. 145 x 105 mm Book Thickness: 1 to 65 mm (Book thickness may be limited depending on sheet weight, book size, and milling depth.) Cover Size: Max. 320 x 660 mm Min. 135 x 225 mm Cover Stack Height: Max. 150 mm Warm-Up Time: 60 min Cycle Speed: Max. 1,350 cycles per hour (EVA) Voltage / Frequency: 3-Phase 200V. 50 / 60 Hz

Condition: new, Year of construction: 2025, ENDPAPER GLUING MACHINE MAGRAF FO-32 Fjdpfefhgzasx Ag Rsft -minimum format of book block; 110x148mm -maximum format of book block; 225x320mm -maximum thickness of book block; 50mm -power supply; 220 V -input power; 0,1 kw -weight; 75kg -dimension; 60c110c132cm

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Location: Supplier Ffjdpfx Aoxta Dyjg Rot

Condition: new, Year of construction: 2023, Orbital sanders are made for sanding straight, curved and shaped pieces with a round or oval section etc. and with a variable thickness for chair, table, bed and associated items. The machines main features are: Frame in electro-welded steel - Rotating disk with 2 opposing abrasive belts driven by an electric moto, with a revolving movement around the workpiece - Electrical control panel - 2 Adjustable workbenchees (inlet - outlet) - Possibility of fitting 2 automatic workpiece-feeding units with adjustable speed by means of inverter. Abrasive belts: 80 x 1260 mm Min-max. workpiece diam.: 10-100 mm (fi) Min. curvature radius: 200 mm Dimensions: 760x1000x1800 mm 3 pieces. Camam, Comec, OMEF, Brusa di Garboli Fjdpfx Agsqnufvs Rsft

Condition: used, Year of construction: 2004, Compact semi-automatic finger jointing line consisting of: - PJ 150/500 milling machine - Transfer table for manual transfer - PJ 7/6100 li single-channel press milling machine: 2 packages / min Press: 2 beats / min Input length: 150 – 700 mm Final length: max. 6,100 mm Ffodpfx Agow Nbacj Rst

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: The machine was operated in Germany and regularly maintained (last service by Homag in 11/2024) Features and technical data: - Workpiece thickness min.: 12 mm - Workpiece thickness max.: 60 mm - Workpiece min. (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) - Edge thickness min.: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max.: 3 mm (coil material) / 20 mm (strip material) - Feed speed: steplessly adjustable 18–25 m/min (frequency-controlled) - Gluing system: EVA hot-melt adhesive - Glue application (tank / cartridge / nozzle): Melting unit with granulate hopper - Glue volume / cartridge size: Granulate hopper, melting capacity 18–35 kg/h, level-controlled - Heating time: approx. 8–10 min - Edge magazine (positions): 2 coils (automatic coil change) Ffodpfxowx Aaqj Ag Ret - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure section: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: FK13 profile milling unit, automatic 8-position tool changer (R = 2 mm) - Bevel / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in FA11 finishing unit - Jointing unit: KAL310/A20/S2 jointing milling unit, 2 × 3 kW - Workpiece pre-heating: available - Release agent spray device: top / bottom, type 2929 (F.01) - Extraction nozzles: multiple Ø 100 mm (individual extraction per unit) - Control system: power control PC22 (industrial PC, woodCommander running Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant per EU directive 98/37/EC Dimensions / required floor space: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg Please note: The return conveyor shown in the pictures is not included in the scope of delivery! Availability: short-term Location: Lithuania

Condition: good (used), Year of construction: 2004, Max size of the book: 440/320/50 mm Min size of the book: 120/120/2 mm Max size of the cover: 660 x 440 mm Max speed (cycle/hour): 500 pcs Optimum thickness of the cover - cardboard 120 - 300 g/m2 Max milling of paper body - 3 mm Working temperature of the glue 10 - 210°С Ffodpfx Agsu R E Els Rot Equipment: - hotmelt spine gluing unit - hotmelt side gluing unit

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 12075, WITH BASE CABINET Book format: 320 x 220 mm (Max. 320 x 300 mm) Cover format: Cover size: 330 x 480 mm (Max. 330 x 680 mm) Book thickness: 2 - 50 mm Cycle speed: up to 300 cycles per hour Heat-up time: 30 - 40 minutes Equipment / Additional information: Fodpfx Agjup A Dnj Rsft Adhesive: Planamelt R 1323-2

Condition: good (used), Kama TS 74-60 Automatic Die Cutter Ffedoxzuluspfx Ag Rot One of the rarest models on the market. Manufactured in 2006, with a run of only 43 million sheets. Machine serviced and maintained on time. Format: 540x740mm Fully automatic, smooth speed control, central lubrication, and safety guards. Includes two frames, several hard sheets for clamping, trolleys, a tool kit, and documentation.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, The machine is currently in use. We offer live demonstration, dismantling loading, installation and training on your site Fedpfx Aev Uab Eeg Roft