Coordinate measuring machine

Coord3 / METRIS KRONOS 30-50-13

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Cgedpfsw Emyzjx Acgjw

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, Measuring Range X – axis 1200 mm Y – axis 2000 mm Z – axis 1000 mm Accuracy acc. ISO 10360 E = [2,6 + 4L/1000]µm DCC controller Renishaw UCC S5 JS box Renishaw MCU-5 (wireless on demand) Temperature sensor Renishaw Probe system Renishaw REVO 5-axis scanning probe Probe changer Renishaw (price REVO system new appx. € 80.000,--) Application software Inspect3D Inca V6 avzula version Cgodpfxsdv I Abo Acgsw built 2014, retrofit 2017 with Revo

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m Cgjdpfjyzza Isx Acgjw 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

Condition: excellent (used), Year of construction: 2016, CMZ TA 20 TY-400 2016: YEAR: 2016 CNC: Fanuc 32i MAIN FEATURES: Swing over bed: 760 mm Swing over carriage: 600 mm Maximum turning diameter: 460 mm Maximum turning length: 473 mm Chuck: SMW Autoblok BHD 250 Bar capacity: 66 mm X axis travel: 310 mm Z axis travel: 400 mm Y axis travel: +70 / –50 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Spindle speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Spindle nose: ASA 6 A2 Spindle bore: 73 mm Turret: 12 stations, all driven Max. speed: 12,000 rpm Power: 11.3 / 8.1 kW Codpfxjyzduze Acgsgw Max. torque: 75 Nm Tailstock travel: 400 mm Machine dimensions: 2,542 x 1,760 x 2,120 mm Weight: 7,500 kg EQUIPMENT: Chuck SMW Autoblok BHD 250 Tool presetter Servo motor for tailstock Tool holder set including 2 driven holders Chip conveyor MACHINE CONDITION: Machine in very good condition. 100% operational. Can be inspected under power.

Condition: used, Year of construction: 1997, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 Cedsx Aq Egopfx Acgegw max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg without filter *

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Cgedpfxouddims Acgow Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: new, Year of construction: 2024, functionality: fully functional, Baty SM350 profile projector - Powerful inspection for demanding applications The Baty SM350 is a sophisticated profile projector with a 350 mm screen and a robust, precise working platform with a measuring range of 250 mm x 125 mm. It is ideal for precise optical inspections in environments where reliability and accuracy are paramount. Cgodjuyh Rpepfx Acgew XLS: A simple 2-axis digital display for X and Y measurements, ideal for basic applications. MX200: This model extends the functions to include geometric measurements, including the calculation of angles, radii and distances. It also enables the creation of tolerance reports. FT2: The most advanced version offers a touchscreen interface with Fusion 2D software. This version includes optical edge detection and full reporting, including SPC diagrams and DXF overlays. The device is equipped with a 3-position lens turret that allows quick and easy switching between different magnification lenses without the need for recalibration. With the FT2-E display option, the SM350 also offers advanced measurement functions such as edge detection and DXF overlays. These features make it the ideal solution for detailed inspections and demanding measurement tasks in the manufacturing industry

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Cjdjlz Rvlspfx Acgegw Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Cjdped N Sm Djfx Acgsgw Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv Cjdpfx Aod Nw Ttjcgogw