Double Planer

Cremona

Condition: ready for operation (used), Year of construction: 1999, A dryer Cremona is available. Sections: 6, temperature zones: 2, cooling section: 1, width: 4200mm. Production capacity: approx. 80 sheets/min. Documentation available. An on-site inspection is possible. Kdsdpfxew I E Dps Ahajl

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 3283, Häwa Round Timber Milling Machine Type 249-193-00 Year of manufacture: 1979, Serial No. 3283, Log diameter: 0.30 - 1.30 m Log length: 2.20 - 6.50 m Connected load: 55 kW Round timber feeding station, log carriage, Kdjdpfx Ahexvq Hkoajl Milling head debarking, scraper chain conveyor with discharge Log sorting system left/right Control panel and electrical cabinets

Year of construction: 1999, condition: ready for operation (used), Two identical circular saws Cremona for the veneer production industry are available. Working width saw 1: 4200mm, working width saw 2: 5100mm. An on-site inspection is possible. Sale of individual units is possible. Kodow I E D Aspfx Ahaedl

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Ksdpfx Ahew I E Dveajdl

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit cutting length 3100 mm Kedpfxjq Rb Irj Ahaedl with rear fence

Condition: good (used), functionality: fully functional, ANGELO CREMONA DRYER model ER 18, 4400mm, 3 levels, steam steam consumption at 10 bar - 2200 calories/hour water consumption at 185° - 1100000 calories/hour PRODUCTION birch thickness 1.2mm Kdjdpfx Asvndvyohajl initial humidity 80% final humidity 6% load 85% 4.2 m3/hour Installed power Kw 95.5 Machinery dismantled, requires overhaul.

Condition: used, Year of construction: 1999, functionality: fully functional, Complete line consisting of: 1. Angelo Cremona Veneer Peeler – detailed description available below 2. Angelo Cremona Dryer – description and photos available in the listings 3. CMP Press – description and photos available in the listings 4. Imeas Sander – description and photos available in the listings 5. Raute Composer – description and photos available in the listings PEELING PLANT Comprising of: Centering Loader 1. Model CE08 2. Angelo Cremona 3. Positions logs for loading onto the veneer peeler 4. Power supply: 400Vac/50Hz – 50kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Weight: kg Maximum dimensions: 600x300x400 mm 5. Production capacity: 4 logs per minute Veneer Peeler 1. Model SFH870 2. Angelo Cremona 3. Peels a sheet of wood from the rotation of the log 4. Power supply: 400Vac/50Hz – 240kW Kdjdovm An Espfx Ahaol Maximum hydraulic pressure: 100 bar Compressed air consumption: 10 L/min Maximum dimensions: 600x400x300 mm 5. Production capacity: 50 cubic meters per shift Cutting and Sorting Line 1. Model TSR27 2. Angelo Cremona 3. Transports the peeled ribbon to the guillotine for optimized sheet cutting 4. Power supply: 400Vac/50Hz – 70kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Maximum dimensions: 300x200x200 mm 5. Production capacity: 50 cubic meters per shift Sorting Line and Vacuum Stacker 1. Model LTR27 2. Angelo Cremona 3. Separates and stacks recovered sheets from full-size sheets 4. Power supply: 400Vac/50Hz – 180kW Compressed air consumption: -- Maximum dimensions: 300x1300x500 mm 5. Production capacity: 50 cubic meters per shift

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day Kdsdjvhctwepfx Ahaol - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: good (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 2,050 mm, input frequency: 50 Hz, Complete decoiling line including: - 3-strand infeed dock - A. CREMONA type CE12 year 1995 - A. CREMONA type SFH 2050x1200 year 1995. - Intermediate conveyor with cell detection of open defects. - A. CREMONA ROTAX 2100 year 1995. - Transport and separation conveyor to stacker. - Waste return conveyor. - A. CREMONA vacuum stacker. CREMONA 4 stations, with lifting tables. - Total length 37m (excluding infeed platform). -Total installed power: 360 kW - 400V-50 Hz Kdsdpfx Aoul S D Nehasl

Condition: good (used), Year of construction: 1980, functionality: fully functional, Complete peeling line for exotic woods consisting of : HAWA crosscut saw + debarker 2-strand infeed dock. Kdsdpfeul Tc Tsx Ahaol Automatic centering machine year 2018. A. CREMONA SF 3300x2020 3-storey Müller coil store. 2 OLM ESTA 2000 and 3300 veneer stacker extractors. Boiler SUGIMAT SH40-2500-2T 2,9 MW year 2011.2 VECOPLAN VTH 800/2T mill Functional unit

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Kdodpeu Axfcofx Ahasl Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height