Milling machine

Deckel FP1

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min Ppsdpsyf Eigefx Afhol rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Ppodpfx Afsw Uc Npehel Vertical rectangular table: - usable surface: 740 x 200 mm - number of T-slots: 2 - width of T-slots: 12-H7 - distance between slots: 120 mm Fixed right-angle table: - usable surface: 700 x 250 mm - number of T-slots: 5 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 250 mm total Universal tilting table: - usable surface: 600 x 210 mm - number of T-slots: 4 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 350 mm total Adjustable in 3 planes, on either side: 30°-45°-30° Spindle internal taper: - horizontal spindle head: ISO 30 (40) - vertical spindle head: ISO 30 (40) - universal rapid head: SV E20+ES20 Swivel in vertical plane: vertical spindle head: 360° Longitudinal travel, hand/automatic: 320/300 mm Vertical travel, hand/automatic: 375/355 mm Cross travel, adjustment handle: 150 mm Quill stroke: 60 mm Readout accuracy on micrometer verniers: 0.02 mm Main motor power/speed: 1.5 kW/1500 rpm Rapid feed motor power/speed: 0.45 kW/3000 rpm Coolant device motor power/speed: 0.15 kW/3000 rpm Spindle speed range: - 1st range: 58-375 rpm - 2nd range: 330-2000 rpm Feed rates (longitudinal or vertical): 12-400 mm/min - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical): 1200 mm/min All technical data is given without obligation and subject to errors or omissions.

Condition: reconditioned (used), Please read the technical specifications thoroughly. If you are considering this machine as an investment, we kindly request your complete credentials, including a valid phone number and email address, in order to provide an offer. Deckel FP1 AKTIV (3-axis active) Machine no.: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment features: - Heidenhain 3-axis active digital readout, type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Quill stroke on vertical milling head: 60 mm - Vertical milling head swivels and can be extended horizontally by 100 mm - Coolant system (coolant tank integrated in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry check videos can be provided upon request. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring distance 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring distance 300 mm) Ppedpfx Asxpwfgjfhjl The following parts have been renewed: - Central lubrication checked - Heidenhain digital readout overhauled - Set of wipers installed - LED indicators for digital readout replaced - Oil change - Vertical milling head newly mounted - Oil sight glass replaced Price quoted is net, ex-stock, loaded.

Condition: good (used), Please read the technical specifications in full. If you are considering the machine as an investment, we kindly request your complete identification, including a valid telephone number and email address, in order to provide you with an offer. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Ppjdpfsxyc Tksx Afhol Manual adjustment of the milling head arm: 100 mm Expansion of working area to: 300 x 260 mm Spindle speed vertical/horizontal: 40 – 2,000 rpm Number of gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z-axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse X/Z-axis: 1200 mm/min Feed Y-axis: manual Fixed angular table: 600 x 210 mm Swivelling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data are not binding! Features: - For horizontal machining, the milling head is swiveled by 90 degrees and pushed backwards. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z axis - The machine underwent partial overhaul by a specialist company several years ago. Equipment: - 3-axis HEIDENHAIN digital readout - Micro-cooling spray unit - Fixed angular table - Chip tray - Machine lamp - Machine feet Further accessories available upon request! Condition: good to very good, from training workshop Available from March 2026

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes Podpox S Edlefx Afhepl - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: excellent (used), Please read the technical specifications in full. If the machine is of interest to you as an investment, we kindly request your complete identification including a correct telephone number and email address before submitting an offer. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis digital readout Travels: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Extension of working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Pedsxyc N Eepfx Afhspl Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z-axis: 5 – 500 mm/min Feed control: stepless Rapid traverse X/Z-axis: 1,200 mm/min Y-axis feed: manual Fixed angle table: 600 x 210 mm Vertical head swivels: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data subject to change! Features: - For horizontal machining, the milling head is swiveled by 90 degrees and pushed back. - 2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719 - Stepless feed on X/Z-axis - The machine received a partial overhaul by a specialist company a few years ago. Equipment: - 2-axis digital readout HEIDENHAIN - Fixed angle table - Chip tray - Machine lamp - Machine feet Additional accessories available upon request! Condition: Good to very good from training facility Available from March 2026

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 30000452, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill travel distance: 60 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 600 mm, table width: 210 mm, overall weight: 710 kg, table load: 200 kg, Equipment: documentation/manual, DECKEL FP1 – completely overhauled in 2012 by FPS (Germany), equipped with Heidenhain digital display, tool cabinet with accessories, and dividing head. Since the overhaul, the machine has seen very light use and is therefore in like-new condition. About FPS: Specialized in the complete refurbishment of DECKEL machines. MANUFACTURER: DECKEL MODEL: FP1 CONDITION: Overhauled (2012) – mechanically and electronically as new! LOCATION: Graz (Austria) IMAGES/VIDEOS: For additional photographs and videos of the machine in operation, please contact us. Description: This high-quality DECKEL FP1 milling machine has been completely refurbished, with both mechanical and electrical components upgraded to the latest standards. A new CE-compliant control cabinet was installed in accordance with current statutory requirements (BGVA 3 / DIN-EN 60204-1, new machinery standard). During the overhaul, the control system, drive package, and drive motors were all replaced and brought up to date. The modernization also included the installation of a new, touch-safe control panel and new motor. Technical data: Operation: manual, with option for automatic positioning Psdpfoxywhcox Afhspl Control: 3-axis Heidenhain digital readout Spindle speed range: 40 – 2000 rpm (geometrically stepped, 16 speed stages) Feed rate: 10 – 500 mm/min (stepless adjustment) Rapid traverse: 1.2 m/min (stepless adjustment) Quill: Vertical & horizontal extension 60 mm, SK40 Travel (X/Y/Z): 300 / 150 / 340 mm Table size: 600 × 210 mm Table load: max. 200 kg Machine weight: 710 kg incl. angle table and milling head Footprint: 1600 x 1400 x 1750 mm (W / D / H) Equipment: Vertical and horizontal spindle Milling head manually swivels ± 90° Completely new electrics and drive packages Overhauled – mechanically and electronically as new Extras: Z-axis bellows Special paintwork Highlights: Heidenhain digital readout for precise operation During overhaul, entire control system, drive package, and drive motors were renewed Contact us to arrange a viewing appointment.

Condition: good (used), Offered for sale is a partially overhauled DECKEL FP1 Aktiv universal milling machine, equipped with a 3-axis Heidenhain digital readout TNC 113 and a dividing rotary table with a three-jaw chuck. Thanks to its compact design, this machine is ideal for smaller hobby workshops or garages. Manufacturer: DECKEL Model: FP1 Machine no.: 2102-3314 - Travel X/Y/Z 300 x 160 x 340 mm - Spindle speed range 40–2000 rpm - Stepless feed in all three axes - Rapid traverse in all three axes - Vertical milling head - 100 mm adjustable vertically - Horizontal milling attachment - 3-axis Heidenhain digital readout TNC 113 - Coolant system Ppsdpoxmggujfx Afhel - Dividing rotary table with a three-jaw chuck Total power requirement: 1.9 kW Machine dimensions (L x W x H): 1.30 x 1.10 x 1.60 m Weight: approx. 850 kg Price is quoted net, ex-works, loaded. Condition: Used.

Condition: ready for operation (used), travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, position of the milling head: SK40, input voltage: 400 V, Deckel FP1 2 axis Active Displacements: X = 300 mm Y = 160 mm Z = 340 mm Speed 40-2000 Rpm Automatic feed and rapid traverse on the X, Y and Z axes. Continuously adjustable. Table dimensions 600 x 260 mm Psdpfx Afovuzg Ajhspl 2 axes Active control, point-to-point control. 3 axis digital readout from Heidehain. Spindle mounting SK40 Deckel mounting (outside thread)

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Ppsdpfxow Agxre Afhel Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: excellent (used), functionality: fully functional, Deckel FP1 milling machine. Very good condition. Fully functional. Ppodpfoxgdr Iox Afhsl

Condition: reconditioned (used), feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, Updated Machineseeker description (with travel distances) Deckel FP1 Aktiv – 3 axes – partially overhauled – ready for immediate use Offered for sale is a Deckel FP1 Aktiv in technically inspected and partially overhauled condition. The machine has been professionally refurbished and is in a reliable, operational state. Ideally suited for workshops, toolmaking, training, as well as single part and small batch production. This is not an unchecked used machine but a technically overhauled tool machine with a clearly defined scope of performance and a predictable delivery time. Technical data and features Travel distances: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Stepless feed on all 3 axes Coolant system Brake motor Fixed angle table Pedsx Tdy Ispfx Afhepl New LED work lamp New leveling feet Technical documentation in PDF format Scope of refurbishment Workshop tested and partially overhauled Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all existing adjustment options Renewal of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The conscious decision for a partial overhaul provides an optimal compromise between operational reliability, cost-effectiveness, and availability. A complete overhaul of the guideways was not carried out, as there was no technical necessity for this. Scope of delivery Machine loaded free of charge Delivery time approx. 12 weeks