BENDING PRESS

FORGIARINI

Condition: used, SECOND- HAND BENDING PRESS FORGIARINI - Platens dim. mm. 1400X800 - Light 900 mm. Ncjdpfx Ajwr Ah Uskfjr - 2 cylinders mm. 100

Condition: reconditioned (used), Year of construction: 2003, power: 5.5 kW (7.48 HP), cutting length (max.): 3,200 mm, cutting width at rip fence: 1,350 mm, Equipment: scorer, with scoring motor 0.73 kW, sliding table 3200 mm, mechanical parallel fence up to 1350 mm, power consumption 13.5A 400V 50Hz, max. saw blade diameter 400 mm, main motor 5.5 kW, extraction port 1x D=120 mm 1x D=80 mm, electric height adjustment, electric angle adjustment – as returned by customer Nsdpjwt A Ecjfx Akfocr

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed Ncodpfx Akoxya Rtsfor End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: used, Year of construction: 1996, Used Machine Ncedexrhh Rspfx Akfor Year of manufacture: 1996 Equipment and technical data: Cutting length: 2800 mm Cutting width: 1300 mm Format cuts: 2800 x 2800 mm Vertical cutting height: 0–75 mm Cutting height at 45°: 0–53 mm Cross-cutting by scale at angle stop: 2800 mm Motor: 4 kW Speed: 4200 rpm Saw spindle: 30 mm Saw blade diameter: 300 mm Table extension: 540 mm Anodized version Tiltable up to 45° Digital display of tilt angle Prepared for scoring unit Mitre fence Dimensions: 2800 x 1600 x 1500 mm Weight: approx. 880 kg Availability: short-term Location: Röllbach

Condition: used, Length of the rolling table ca. 2280 mm Saw blade diameter ca. 400 mm weight ca. 900 kg Parallel stop: Stop sliding table: 1550 mm with mitre rail Nsdpfowzmvhox Akfocr incl. side stop extension to 1000 mm Star delta circuit has been renewed

Condition: used, Year of construction: 1981, used, in good condition cleaned, lubricated partially overhauled fully adjusted parts replaced Brand: Martin Model: T 70 Year of manufacture: 1981 Machine no.: V-112873 GS-tested Motor: 4.8 kW Steel guides Cutting length approx. 2700 mm Tiltable up to 45° Parallelogram guard Ncjdpfx Akswkvw Tsfer Table extension Height adjustment hydraulic Tilting adjustment hydraulic Mitre fence Extraction connection D 120/80 mm Required space approx. 2800 mm x 3400 mm x 1200 mm Weight approx. 1000 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without any warranty or liability

Condition: used, Year of construction: 1978, total length: 3,400 mm, total width: 1,850 mm, total height: 1,600 mm, Weight: 1.250 kg - Year: 1978 - Documentation available: No - CE certificate present: No - Serial number: 78-11-11 - Roller table length [mm]: 3200 - Table width [mm]: 1070 - Arbor saw blade diameter [mm]: 35 - Dust extraction nozzle diameter [mm]: 115 - Controlled axes: Cutting height, Scoring unit height - Options: Scoring unit - Spindle speed: - └ Max. spindle speed [rpm]: 4000 Ncjdpfxjyazbbe Akfor - Voltage [V]: 380 - Transport dimensions: 3400mm x 1850mm x 1600mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, SAC RS/530 Thicknesser width mm. 530 Ncodpfx Ajyzfvgjkfsr

Condition: good (used), Year of construction: 1989, machine/vehicle number: V165126, functionality: fully functional, For sale is a high-quality panel saw from Martin (Otto Martin Maschinenbau, Made in Germany) – a robust and durable professional-grade machine for the carpentry/joinery sector. Manufacturer: Martin Year of manufacture: approx. 1989 Saw blade: Ø 200–450 mm Speeds: 2800 / 4000 / 5500 rpm Voltage: 380 V / 50 Hz Equipped with a stable sliding table Parallel fence & crosscut fence included Extraction connection available Condition: Used, but fully functional Typical signs of use (see pictures) Very solid industrial quality – not a DIY store machine Viewing and test run possible by arrangement. Ncedpfxsy D Iyae Akfjr Ideal for joinery, workshop, or advanced woodworking. Location: 45356 Essen